complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition  ...

• more information

Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 k ...

Battenfeld TM 100/525 Year of construction: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Spray pressure: 2100 bar Dosing volume: 251 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Size of clamping plates: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot Interface Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Metrics: Weight: 3900 kg Length/Width/Height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating capacity: 12.1 kW Total ...

Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2

Manufacturer : BATTENFELD Model: 100T TM 1000 / 525 Year of manufacture: 2000 Screw diameter: 40 mm Closing force: 1000 kN ...

• more information

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the con ...

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection ...

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit. ...

• more information