We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
warehouse no.: 503413 manufacturer: ARBURG type: 1500T 1600-350 controller: year of construction: 2006 operation hours: 34721 h clamping force: 1600 kN distance between tie-bars h x v: 1500 mm round table diameter: 1500 mm ejector stroke: 150 mm ejector force: 46 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar equipment included screen text german CEE-socket 16A rotary table Cascade control hydraulically 4x core pulling hydraulically 2x machine with rotary index table machine incl. water flow regulator machine without material hopper Schuko-socket ...
Production year: 2007 Injection unit: .../800-350 Screw diameter: 35 / 35 mm Injection volume: 139 / 139 cc Injection weight: 131 / 131 g Tool closure system: 320/... Clamping force: 320 t Distance between tie rods: 720 x 720 mm Tool height: 300...1400 mm Ejector stroke: 250mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 6.83 x 2.25 m Weight: 17.000 kg Instrumentation: 1 x Defective conveyor belt 1 x roller conveyor Turntable Rotameter 8 sections Rotameter 12 sections Rotameter 4 sections 3 x Cores Euromap 67 4 x Pneumatic valves 2 x Hauls On the photos shown, the peripherals are not always included.
Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot ...
Power (ton) 320 Table dimensions ( x-y/mm) 1040 x 1040 Stroke (mm) 300 - 700 Potenza di lavoro (Bar) 230 Location cuneo italy Machine Conditions ce marked Model 720 s 3200 800 ...
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
Connected load: 17.71kW. ...
Ref. no.: 18326 Hersteller: ARBURG Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200-400 mm Opening width: 500-700 mm Platen size (h x v): 510 x 510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,2 x 1,5 x 2,1 m Machine weight: 3740 kg Additional information & extras Core pull: 1 pcs Accumulator: 1 pcs Robot Producer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Arburg Injection Moulding Machine Type: 520 C 2000-675 Control: Selogica Built: 1999 Closing unit Clamping force t: 220 Opening path mm: 900 Holm size mm: 520 x 520 Installation height min/max mm: 250 Plate size: 715 x 715 Spraying unit Screw diameter mm: 60 Spray weight gr: 427 Spray volume cm3: 508 Spray pressure bar: 1400 Dimensions and weights Dimensions LxWxH m: 5.6 x 1.7 x 2.2 Machine Weight Kg: 7050 Other - Clamping force increased to 220 KN - resistant plastification unit - 2x core pull - Robotinterface Euromap12
ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)