used JAFO Universal Milling Machines

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE “B” material - hydromechanica ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Universal milling machine. Hure head. Table size: 2000x480mm. Longitudinal travel: 1700mm. Cross travel: 400mm. Vertical travel: 575mm. ISO50. Motor power: 20cv. Weight: 5500Kgs. Dimensions: 2550x2380x2680.

Universal milling machine with automatic movement ram. Table size: 1600mmx320mm. Longitudinal travel: 1200mm. Cross travel: 300mm. Vertical travel: 600mm. ISO50. Hure head. Equipped with DRO Fagor.

Universal milling machine. Table size: 1400mmx300mm. Longitudinal travel: 1200mm. Cross travel: 320mm. Vertical travel: 500mm. ISO40. Hure head. Speeds: 12. (40-1800rpm). Motor power: 7Kw.

Universal milling machine with automatic movement ram. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. Vertical head. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Key data: 12550 , 350 , 850

Table length: 12550 mm Table width: 350 mm Longitudinal X: 850 mm Cross Y: 250 mm Vertical Z: 470 mm Make: Reiden Swiss Type: FU 150 YOP: 1980 3 Axis digital read out Rapid feed all 3 axis Power 5kW X-Axis:         850mm Y-Axis:         250mm Z-Axis:         470mm Table Length:   1.250mm Table Width:    350mm Table load:     400Kg Spindle speeds: 2000Rpm Feed rate X-Axis:2.700mm/min. Feed rate Y-Axis:2.750mm/min. Feed rate Z-Axis:1.100mm/min. Length:         2.000 mm  Width:          1.700 mm  Height:         2.000 mm  Weight:         2.000 kg 

Table length: 1650 mm Table width: 360 mm Longitudinal X: 1270 mm Cross Y: 280 mm Vertical Z: 400 mm OPTIMUM - OPTImill MT 200 Universal milling machine 1290 x 280 x 400 mm MACH - ID 6340 Make: OPTIMUM Type: OPTImill MT 200 YOP: 2013 X-Axis    1.270 mm Y-Axis       280 mm Z-Axis       400 mm Table Length       1.650 mm Table Width          360 mm Table load             450 kg Spindle speeds      1750 Rpm Feed rate X-Axis      420 mm Feed rate Y-Axis       393 mm Feed rate Z-Axis       168 mm Stroke pinole             ISO 50 mm Dimensions Length       2.160 mm Wi ...

Table length: 1200 mm Table width: 228 mm Longitudinal X: 800 mm Cross Y: 400 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Teach in ProtoTRAK - SMX Teach in Teach in Milling 800 x 400 x 500 mm MACH - ID 6333 Make: ProtoTRAK Type: SMX Teach in Control: ProtoTRAK SMX X-Axis    800 mm Y-Axis    400 mm Z-Axis    500 mm Table Length     1.200 mm Table Width        228 mm Table load           600 kg Power on spindle     3 kW Spindle speeds       3600 Rpm Spindle Taper        40 ISO/Bt/Mk Control      SMX Dimensions Length     3.200 mm Width      2.800 mm Height     2.300 mm Weight     2.000 ...

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 350 mm Vertical Z: 400 mm CNC Brand: _Unknown / Other MACH-id       6029 MAKE            Kunzmann Germany TYPE              WF 4/3 YOP               2007 SPECIFICATIONS X-Axis         400 mm Y-Axis          350 mm Z-Axis          400 mm Table Length        650 mm Table Width         350 mm Table load            250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis        5000 mm/min. Feed rate Y-Axis        5000 mm/min. Feed rate Z-Axis       ...

Table length: 1250 mm Table width: 200 mm Longitudinal X: 600 mm Cross Y: 500 mm Vertical Z: 400 mm MACH-id      5556 MAKE          TOS OLOMOUC TYPE             FA 3 C YOP               2003 SPECIFICATIONS X-Axis       600 mm Y-Axis       500 mm Z-Axis        400 mm Table Length          1250 mm Table Width              200 mm Table load                 100 Kg Spindle speeds         2000 Rpm DIMENSIONS Length        2000 mm Width         1800 mm Height        1550 mm Weight    &nbs ...

Table length: 650 mm Table width: 350 mm Longitudinal X: 400 mm Cross Y: 320 mm Vertical Z: 400 mm MACH-id    5479 MAKE         Kunzmann TYPE           WF 4/3 YOP            2010 SPECIFICATIONS X-Axis       400 mm Y-Axis        320 mm Z-Axis         400 mm Table Length       650 mm Table Width        350 mm Table load         250 Kg Spindle speeds        4000 Rpm Feed rate X-Axis      10.000 mm/min. Feed rate Y-Axis         10.000 mm/min. Feed rate Z-Axis           10.000 mm/min. DIMENSIONS Length          3000 mm Widt ...

Universal milling machine. Table size: 1200mmx320mm. Longitudinal travel: 950mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. DRO Fagor.

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

Table length: 1400 mm Table width: 630 mm Longitudinal X: 1120 mm Cross Y: 630 mm Vertical Z: 500 mm MACH-id    372 MAKE        TOS Kurim TYPE          FGS 63 YEAR         1997 SPECIFICATIONS X - Travel    1120 mm Y - Travel      630 mm Z - Travel       500 mm bed / plano / portal / moving column          Universal conmventionel milling machine Table Length x Width   1400 x 630 mm Table load in kG     1500 Kg Spindle Taper    ISO 50 kW power on spindle    15 kW Spindle speeds / ranges     1800 Rpm DIMENSIONS Length     3700 mm Width       2500 mm Height     2700 mm  

Table length: 1230 mm Table width: 370 mm Longitudinal X: 700 mm Cross Y: 315 mm Vertical Z: 180 mm CNC Brand: _Unknown / Other MAKE  Fehlman Swiss TYPE   PICOMAX 80 3/2 YEAR   1992 SPECIFICATIONS X - Travel    700 mm Y - Travel    315 mm Z - Travel    180 mm W - Travel   495 mm bed / plano / portal / moving column CNC Milling machine Controll   HeidenHain TNC 407 Table Length x Width   1230 x 370 mm Table load in kG     250 Kg Spindle Taper    Sk 40 ? Number off controlled axis   3 DIMENSIONS Length    2150 mm Width     2400 mm Height    2200 mm

Table length: 730 mm Table width: 280 mm Longitudinal X: 420 mm Cross Y: 240 mm Vertical Z: 450 mm CNC Brand: Heidenhain CNC Model: TNC 355 SPECIFICATIONS X - Travel   420 mm Y - Travel  240 mm Z - Travel   450 mm bed / plano / portal / moving column   Coordinate Milling machine Controll    Heidenhain TNC 355 Table Length x Width   730 x 280 mm Table load in kG   75 Kg kW power on spindle  4 kW Spindle speeds / ranges  9000 Rpm Number off controlled axis  3 DIMENSIONS Length   2000 mm Width    1400 mm Height  2300 mm

Table size: 440 x 1200 mm table movement x: 950 mm table movement y: 250 mm table movement z: 475 mm spindle retainer: ISA 40 spindle speeds: 40-1800 rpm feeds longitudinal & cross: 16-630 mm / min feed vertically: 5.6-224 mm / min. Supply: 380 V, 7.5 kVA kW space: 2150 x 2000 x 2100 mm weight: 2400 kg

Universal milling machine. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg