used HITACHI Wire Cutting Spark Erosion Machine Tools

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Travel routes: X: 350 mm Y: 500 mm Z: 300 mm Travel (U x H): 200x200 mm FFII Generator Awf Dielectric cooling Water tub X2 Generators

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Key data: 320 mm, 250 mm, 160 mm

Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm

Inv. Num. : 5124 Type: 254Z Producer: Hitachi Created: 2003 Parameters: Control system: FANUC Table length: 400 mm Table width: 250 mm Maximum workpiece length X: 400 mm Maximum workpiece width Y: 250 mm Maximum workpiece height Y: 210 mm Equipment: Manual control List

Inv. Num. : 6099 Type: 203 Y Producer: Hitachi Created: 2002 Parameters: Hours: 39801 h Max. travel length of the X-axis: 330 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm Machine weight: 300 kg

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals* at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in tita ...

This HITACHI SEIKI 254Y Erosion machine was manufactured in the year 2003 in Japan. The machine has a wire feed rate of 20 to 300 mm/s.

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed for durability. It offers reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides precise and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially with extensive inventories. Low operating costs Because Vulcan is a laser device, employees don't have to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military standards for robustness (MIL-STD-810G). It also comes with a 3-year warranty. Prove ...

Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

HITACHI SEIKI VM 50 X-axis - 760mm Y-axis - 510mm Z-axis - 510mm Table size 1120x510mm CNC control - Seicos A10M

X: 300 mm Z : 620 mm Chuck : 10 inches Part conveyor Part catcher

HITACHI SEIKI TF25-1100 CNC 2 AXIS Seicos control (Fanuc based) Turning diameter 400 Turning length 1000 Self-centering chuck diameter 250 Turret 10 positions Tailstock in cycle Presetting Chip conveyor RS232 port Year 1999 Machine in production

Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995

blower power: 19 kW motor: . bucket: Diesel . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

Qty. 1 Second-hand copper rolling mill Material: Copper & Copper Alloy (Pbc, Etc.), Aluminium, Etc. Manufacture: Hitachi(Japan) Type: 4-Hi Reversing Rolling Mill Strip Width: Max 450 mm Thickness: 0.3 mm ~ 4.0 mm (Copper) Line Speed: 100 m/min. Coil Weight: 5,000 kg Manufacturing Date: 1963 1st Revamping Date: 2008 2nd Revamping Date: 2010 3rd Revamping Date: 2020. 05 Revamping: Mill Housing Clean & Painting Improvement of Screw Down System (Ram Cylunder --- Geared Motor) Change of Deflector Roll & Press Plate Right/Left Reel: Increase Capacity Right Reel: 30 kW, 200/500 RPM – 110 kW, 650/1,800 RPM, Left Reel: 30 kW, 200/500 RPM – 75 kW, 400/1,500 RPM Change of Drive for 2-Coil Car: Hydrauric Cylinder – Geared Motor

Used Hitachi 50ASC-Z screw compressor on Freon with a sight glass and capacity control. The compressor has a displacement of 169,5 m³/h. Running hours compressor 1: 4407 Running hours compressor 2: 4385 Brand Hitachi Type 50ASC-Z Refrigerant Freon kW at +10ºC/+40ºC 171,0* kW at 0ºC/+40ºC 142,0 kW at -5ºC/+40ºC 116,0 kW at -10ºC/+40ºC 94,0 Capacity Control Sight Glass m3 / h 169,5 Remarks | Y.o.b. 2009 Remarks || *Capacity based at +5ºC/+40ºC Weight in kg. 440 Amount in stock 2

This device is calibrated for rapid detection of metals in scrap and recycling. Within a second, you can see V2A, V4A, chrome steel, bronze, gunmetal, aluminum alloys and much more. The device is not suitable for precious metals or catalysts. The device has only been in use at the customer for about 3 years and is in good condition. The device includes two batteries for about 8 hours of operation each, a charger with charging cradle and the transport protective case. In contrast to newer devices, the internal camera is also unlocked here, so that you can save images of the measuring range in the device. The device has received all available software updates and can be used in conjunction with the smartphone app, via cloud computing or even as a single device.