We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
MADO MEW 620 Automatic Grinder, performance 1400kg/h, bowl capacity 35kg, stainless steel construction, Unger Cutting System reduces handling and minimizes heat rise. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
Ground meat portionning line Mado Category Used meat processing machines Subcategory Lines Type Lines Height 950 Width 1100 mm Length 2700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel
used
Throughput depending on material type, speed, and cutting set Capacity: up to 1.600 kg/h Main motor power: 5.5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 100 Lenght: 70 Height: 210 Delivery time: 10 working days after advanced payment
used
Meat grinder Mado Optimo 2, type MEW 624, 114 stuffing grinder, Machine in stainless steel, 2 speeds, Removable screw housing, with reverse operation, Connection 400V, 6kW, year of construction 2008, Dimensions LxWxH approx. 107x72x115cm, weight approx. 247kg, good used condition, fully functional
used
MADO MEW 725 automatic grinder, including lifting device, two feeding worms, one working worm, cutting set Unger 5 pcs., including key for the removal of the working worm
used
mobile, equipped with various press moulds, 2x auger, hopper size 500x550 mm, foot control
used
MADO Selekta bandsaw
MADO Perfekta-plus MKB 649 bandsaw, table version. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
used
MADO used Selekta bone bandsaw Machine runs loud, and therefore has no brake at a bargain price before use the machine must be cleaned thoroughly
used
MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.
used
Type Grinders / Mincers Height 1580 Width 980 mm Length 1100 mm Voltage Electrical: 400V 50Hz 3N Installed Power 4 kw Main material Stainlees Steel Time of realisation 2-3 weeks Throat Diameter mm Grinder Type Feeding System Hooper
used
MADORA SB 1300X2500 aluminium grinding machine was built in 2018 in Poland. A highly reliable machine designed for a wide range of finishing operations i.e. deburring and edge rounding, achieves excellent machining results on the entire surface of the ground workpiece. For surface finishing of workpieces with a maximum thickness of 50 mm, the machine uses a 1300 mm wide technical fleece cylindrical grinding wheel with adjustable oscillation. The SB 1300X2500 aluminium sheet grinding machine is operated via a TFT control panel, which allows, among others, to adjust the machining thickness and change the feed speed of the gantry. The total weight of the machine is 2870 kg. Technical data of the MADORA SB 1300X2500 deburring machine - work table surface (L x W): 2500 x 1300 mm - maximum workpiece thickness: 50 mm - minimum workpiece thickness: 0.5 mm - feed rate: 0,5-2 m/min - numbe ...
used
MADO MSM 765 SL SUPRA 70, 70 liters bowl cutter, two bowl speeds, mixing speeds, knife head with 6 knives, refurbished
used
Bandsaw Mado Dimensions: 70x75x170CM Electrical power: 3 KW
used
Bone saw Mado Perfekta Plus MKB 649 in a very good used and functional condition. Completely made of stainless steel. Table-top unit, dimensions W/D/H 55/55/90 cm. Connected values 400 volts, 1.1 kW. Workshop tested, immediately ready for use. More on request.
used
We sell here a bone saw from the manufacturer Mado, type MKB 649 in a very good used and functional condition. The machine runs on 400 volts, 1.1 kW, completely stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 55/55/70 cm, more on request.
used
Meat grinder, make Mado, type Optima, built in 2014, Dimensions of filling bowl: L x W: 740 x 550 mm,, Electrical connection values: 5.6 kW,, power: Machine cycle: 15 - 40 seconds, Dimensions / weight: (WxLxH): 820 x 900 x 1070 mm, 227 kg
used
Mado knife sharpener, type: MNS 650, number: 1537703, 230/400 V, 3 Ph, 50 Hz, 1.7/1 A, 0.5 kW, dimensions: 550 mm x 350 mm x 320 mm.
used
Producer: Servotech 250 mm Description: Servotech (Brand new) -Throat diameter 250 mm -Output 5000 - 10000 kg/h -One speed motor -Full power 37 kw -External dimensions: 2070 mm x 1070 mm x 1685 mm -Hopper capacity aprox 300 l -Total wiegth 1500 kg -Machine is fully made of stinless steel -Mixing /grinding temperature to -15°C -Two sets of knives; one for frozen, and one for fresh meat.
used
Laska angle grinder WW 130, 130 mm, 1-speed grinder, frozen meat version, all stainless steel, ergonomic control, saftey cover for cutting set hinged and electrically interlocked, saftey grid for hopper. The machine is immediately available and can be tested in Koblenz, Germany.
Seydelmann automatic grinder AE 130, 130 mm hole plate diameter, almost completely made of solid stainless steel, 2-speed working worm, 2-speed feeding worm of stainless steel, conical and extra wide, rectangular to the working worm, approx. 14/18 kW, feeding motor approx. 1,8 kW, separately switchable, hopper capacity approx. 130 litres, with interlocked safety grid, worm, worm housing and closing nut completely stainless. The machine will be available soon and can be tested like in Koblenz, Germany.
used
Seydelmann AU 200-B angle grinder, 200 mm hole plate diameter, almost completely made of solid stainless steel, with loading device. You are very welcome to test the machine in Koblenz, Germany.
used
Seydelmann ME 130, mixing grinder, hole plate diameter 130mm, Unger cutting system, working worm 2 speeds, 1 mixing speed, safety grid. You are very welcome to test the machine in our facility in Koblenz, Germany.
Seydelmann AD 114 automatic grinder, 114 mm, almost completely made of solid stainless steel, two speeds on working worm, two speeds on feeding worm, safety grid. The machine is immediately available and you are very welcome to test the machine in Koblenz, Germany.
new
Model: M130 The machine is massive, made entirely of stainless steel. Equipped with a protective cover on the neck and on the receiving hopper. The neck is massive, cast with spiral grooves. The tool set of the machine consists of a large working auger, a massive nut, knives with a cast plate Robot C4 - 2 pcs., kidneys - 2 pcs., grids of sizes: 3,4,5,5,7-8, 10 and 13 mm. , distance sleeve - 2 pcs., Mercedes - fixing sleeve The machine is extremely reliable. The electrical components and bearings used in the machine are of leading global brands. Powerful motor – 8 kW, built into the machine. There is an additional lever for automatic extraction and easy disassembly of the tools. Technical data: - neck diameter: 130 mm. – capacity of the receiving hopper 65 l. – 2 auger speeds – 5 cutting tools The machine is patented and has a CE ...