Kurutma odaları

Description: • Varnish drying line • Maximum passage width approx. 1800 mm • Maximum passage height approx. 100 mm • Variable feed speed • Composed of: • BARBERÁN EVL-120-C / 1800 evaporation tunnel: serial number 14697, tunnel length 12900 mm • BABERÁN TSP-105/1800 pressure drying tunnel: serial number 14698, tunnel length 12000 mm • BARBERÁN TL-40/1800 low pressure UV tunnel: serial number 14699, tunnel length 4000 mm, approx. 32 lamps length 1500 mm (140 W) + approx. 32 lamps length 600mm (40W), some lamps may be missing • BARBERÁN TL-40/1800 low pressure UV tunnel: serial number 14700, tunnel length 4000 mm, approx. 32 lamps length 1500 mm (140 W) + approx. 32 lamps length 600mm (40W), some lamps may be missing • BARBERÁN ECOFLASH EF-18/3 + HOK-4/2 UV tunnel: serial number 14701, total length 8000 mm, tunnel length 4000 mm, 3 transversal UV lamps, 2 lateral U ...

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: serial no. 91317/10 power 54.61 kW 3 drying lamps minimum allowable workpiece length: 400 mm maximum allowable workpiece width: 1300 mm minimum allowable workpiece thickness: 70 mm lamp rating (120 W/cm2): 51,6 kW rate of discharge of exhaust fan: 900 m3/h total installed power 54,61 kW with electrical cabinet CE Standards dimensions in mm: approx. 4350 x 2060 x 1330, weight in kg: approx. 800 serial number: 91317/10, working width: 1,300 mm, Approx. Onsite Dimension. (l x w x h): 4,350 x 2,060 x 1,330 mm, weight approx.: 800 kg

Description: • Air blade air, evaporation tunnel • Serial number 6176  ,• Total installed power 3.45 KW • Maximum passage width approx. 1400 mm • Maximum passage height approx. 80 mm • Tunnel length 3000 mm • Heating power 56000 Kcal/hApprox. Onsite Dimension. (l x w x h): 3,500 x 2,600 x 2,380 mm, weight approx.: 2,000 kg

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989

Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture