KELLER satılık ikinci el makine

Mahzen Ekstraksiyon blower'ları 1.8kW

Keller SMM 016,0 Ekstraksiyon blower'ları Çap: 160 / 160mm Hava akış hızı 1200 Nm³ / h 1.5kW

Mahzen SMM 012.0 Ekstraksiyon blower'ları Çap: 120 / 120mm Hava akış hızı 700 Nm³/h 0,55kW

Hacimsel debi 2.000 – 3.000 m³/h Ses basıncı seviyesi < 75 dB U/G/Y 1,4 m / 1,4 m / 2,0 m Ağırlık 1.025 t Güç gereksinimi 7,5 kW

Description: Machine number: 502485 Operating voltage: 400 V Frequency: 50 Hz Connection: 5.5 kW Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 2,000 mm, weight approx.: 500 kg

Two-roll corrugating machine - crimper, for the production of polyester staple fibers, manufactured by KELLER (USA) by order of KOBE STEEL (Japan). The width of the work rolls is 150 mm. It is equipped with a clamping pneumatic cylinder and a drive gearbox manufactured by SEISA REDUCTION GEARS with a capacity of 150 kW. Productivity is up to 50 tons / hour. Made of AISI 304 stainless steel. 4 pieces are available. The equipment was practically not used - an operating time of about 60 hours.

Single screw degassing extruder CFE-699-A-04 for polymers manufactured by KELLER (USA) and KOBE STEEL (Japan) under a DUPONT license. The extruder has the following parameters: Overall dimensions of the extruder, taking into account the gearbox and motor - length 12 meters, width -2.5 meters, height -1.5 meters, the total diameter of the casing with a heating-cooling jacket is 950 mm, the diameter of the screw is 600 mm, screw length -7800 mm. The average screw speed is 22-25 rpm. The total weight of the extruder without spare parts is 40 tons. The working pressure in the casing is up to 300 bar, the working temperature of heating the melt is up to 300 degrees. The casing of the extruder is heated by high temperature oil supplied to it. The average productivity of polymers is 50-100 tons per hour. The extruder is equipped with a parallel reducer of POWER-TECH INTERNATIONAL (FOOT-JONES)  ...

Type: Vario T 1.0 L originates from LVD lasercutting machine power: 2,2 kW

Teknik verilerSpindle hızları: 1800 rpmApired hava: 20 m3/dkVoltage 50 Hz 3x: 400 VoltDriving motor (motor gücü): 1.1 kWPower : 2.7 AWeight : 100 kgDimensions : Length: 800 mmWidth : 550 mmHeight : 1100 mm

Kacapacity (x): 0 Process Uygulama: 0 Ağlam Bilgi: 0 Teknik veri Spindle hızları: 2850 rpm Ekli hava: 1000 m3/h Voltage 50 Hz 3x: 400 Volt Driving motor (motor gücü): 1,5 kW Dimensions: İlgiti: 1200 mm Yapı: 800 mm Sağlık: 2300 mm

Kacapacity (x): 0 İş Uygulaması: 0 Ağlam Bilgisi: 0 Teknik veri Voltage 50 Hz 3x: 400 Volt Installed güç: 0,55 kW Ağırlık: 60 kg Dimensions: Son: 650 mm Yapı: 500 mm Height: 1100 mm

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.