taşlama makineleri kullanılmış satılık (2,485)

grinding length: 600 mmgrinding width: 375 mmworkpiece height: 325 mmgrinding height: 325 mmtable load: max. 300 kgtable longitudinal travel: max. 650 mmtable speeds: 1 - 30 m/mingrinding spindle speed: 1440/2900 U/mingrinding wheel size: 300 x 50 x 76,2 mmgrinding spindle drive: 3,7/4,7 kWvertical feed grinding spindle max.: 180 mm/min.cross travel: 350 mmcross adjustment: 1 - 40 mmrapid traverse cross: 1200 mm/mintotal power requirement: 9 kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 2,75 x 2,10 x 2,05 m- with autom. positioning -Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y- and Z-axis, 1 grinding wheel with flange separate, balancing scale, wet grinding attachemntThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 400 mmworkpiece height: 375 mmtable adjustment - longitudinal: max. 660 mmtable cross movement: max. 410 mmdistance spindle center to table: max. 525 mmtable speeds: 2 - 28 m/mintable load: max. 400 kgcross feed of table intermittent: 3 - 40 mmrapid traverse cross: 1 m/mingrinding wheel size: ø 300 x 50 x ø 76 mmtotal power requirement: 8 kWweight of the machine ca.: 2,1 tdimensions of machine L x W x H: 2,75 x 1,7 x 2,42 mAccessories: magnetic plate 600 x 400 mm, grinding wheel with flange, 1 flange separate, DRO on Y-axis (vertical), wheel trueing attachment, balancing scale, wet grinding attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-50799-202

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-50799-102

Rotational speed 7500 rpm, Power supply 230 V, Mass 2.0 kg, Plate size 100 mm / 3.2 mm Auction-ID: A7-50799-2

Multi-function portable electric knife sharpener for high-speed steel (HSS) drill bits, chisels, planes, knives and scissors. Rated power: 65 W, Input voltage: 230 V/50 Hz, No-load speed: 6700 rpm, Duty cycle: S3 15% (90 sec on, 510 sec off), Compatible drill bits: 3 x 10 mm, Compatible chisels and blades: 6 x 51 mm, Sharpening disc diameter: 48 mm Auction-ID: A7-50799-7

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-50799-344

grinding length: 400 mmgrinding width: 210 mmworkpiece height: 300 mmgrinding wheel width x diameter: 250 x 15 x 51 mmturning speeds: 1100-2800 U/minforward and return motion adjustable: 0-3 m/min: 350 x 200 mmtotal power requirement: 2,1 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2 x 1,5 x 1,8 mSurface grinding machine with:- Coolant system- Heidenhain digital readoutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

90W electric chain sharpener Designed to be attached to a workbench, table or wall in the garage or workshop. The working angle is adjustable from 0 to 35 degrees, adapting to different chains and sharpening depth. Equipped with a sharpening speed of 5000 rpm and a powerful 90 W motor. The chain clamp fits all types and pitches of chain. Precise sharpening angle adjustment of 35 degrees to the right or left. Compact and mountable on any workbench, wall, vise or table. Auction-ID: A7-50799-11

grinding diameter max.: 100 mmregulating wheel width: mmmax. width of grinding wheel: 230 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED CENTERLESS GRINDING MACHINE ROSSI 300Serial No.: 4785Wheel width: 100 mmWorking wheel diameter: 300 mmEquipped with2 Hydraulic diamond cutters1 Strip holder for working in a row1 Manual plungeDimensions and weightEuro pallet 1200x800xH1600mm - weight 1200 kg Auction-ID: A1-50950-66

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6ASerial No.: C733.06Year: 2006Workingwheel Outer diameter of the grinding wheel: 610 mmEquipped with1 SIEMENS SINUMERIK CNNumber of CNC axes: 61 Gantry loading and unloading between the grinding wheels1 Double control wheel carriage driven by 2 Bruschless motors1 Bruschless motor on the spindle2 CNC diamond cutters with dimension adjustmentDimensions and weightMachine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-16

USED GHIRINGHELLI GRINDING MACHINE TYPE M200 CNC4A SerialNo.: C679.03Year: 2003Workingwheel Outer diameter of the grinding wheel: 500 mmEquipped with1 CN SIEMENS SINUMERIKNumber of CNC axes: 41 Gantry loading and unloading between the grinding wheels1 Double control wheel carriage driven by 2 Bruschless motors1 Bruschless motor on the spindle control wheel2 CNC diamond cutters with dimension adjustmentDimensions and weightMachine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-18

Used Centerless grinding machine LIDKOPING 46Workingwheel Ø Exterior: 508 mmWidth: 610 mmControlwheel Ø Exterior: 330 mmWidth: 610 mmThreadwork Plunge work CNC motor 0.001Equipped with1 Control cabinet with PLCSIEMENS 1 CNC plunge on the working wheel1 CNC motor on the control wheel1 External lubricationpump tray 2 Hydraulicdiamond cutters 1 Batten holder for working in a rowDimensions and weightMachine: 3800x2100xH1600mm - Electrical cabinet: 1000x400xH1700mm - 1 pallet - total weight 8500 kg Auction-ID: A1-50950-37

USED MICROREX CENTERLESS GRINDING MACHINE type 1HWheel width: 100 mmEquipped with1 Strip holder for diving1 Manual and automatic manual and automaticdripping work 1 Hydraulic diamond cutting Auction-ID: A1-50950-48

USED GIUSTINA GRINDING MACHINE TYPE 114/500Serial No.: 61Year: 1983Workingwheel Outer diameter of the wheel: 610 mmInner diameter of the wheel: 305 mmWidth of the wheel: 500 mmCheckwheel Outer diameter of the wheel: 356 mmInner diameter of the wheel: 152.40 mmWidth of the wheel: 500 mmStrokes Fast diving stroke: 3.6mm maxiPlunge working stroke: 1.5mm maxiDimensions Weightof the machine: about 12,000 kgEquipped with1 Magelis TelemecaniquePLC 1 Marpossstyle diameter controller 1 Conveyorbelt feeding system 1 Conveyor belt partsunloading system 2 Hydraulic diamond cutters with automatic dimension adjustmentDimensions and weight4500x2200xH1500mm - weight 12000 kgConditional disassembly cost: 500 € Auction-ID: A1-50950-20

USED VILAR DRILL SHARPENER type 115VL50Maximum diameter of the drill bits: 50mmSharpening of the drills on the left and rightDimensions and weightPallet Europe 1200x800xH1600mm - weight 500 kg Auction-ID: A1-50950-77

USED BRIERLEY ZB32 DRILL GRINDERMaximum diameter of the drill bits: 32 mmLeft and right sharpeningDimensions and weightEuro pallet 1200x800xH1600mm - weight 250 kg Auction-ID: A1-50950-7

USED DANOBAT 800 RP CYLINDRICAL GRINDING MACHINEDistance between tips: 600 mmTip height: 150 mmWheel diameter: 500 mmMax. wheel width: 120 mmManual and automaticmovement Automatic pass socketEquipped with1 F68clamping 1 Counter point1 Lubrication tankDimensions and weight2800x1800xH1950mm - 2 pallets - weight 3200 kg Auction-ID: A1-50950-11

Used VOUMARD 5A grinding machineSpindle diameter: 90 mmSpindle speed: 3600 RPMInter grinding diameter: 5 - 200 mmGrinding depth: 250 mmMax. length of workpieces to be grinded: 500 mmTip height: 180 mmNumber of turns of the workpiece spindle: 6Workpiece headstock speed: 500 - 800 - 1000 RPMHeadstock inclination: 90°Table stroke: 3 - 600 mmTable speed: 0.01 - 10 m/minMachine weight: approx. 2800 KGDimensions and weight2650x1400xH1950mm - weight 3000kg Auction-ID: A1-50950-78

STUDER S-50 CYLINDRICAL GRINDING MACHINE RETROFITTEDSerial No.: 511419Year: 1988Bench grinding diameter: 450 mmWheel dimensions: ∅ outside 750 width 80 mmDistance between tips: 1600 mmLongitudinal stroke: 1600 mmEffective stroke transverse axis: 200 mmRotational speed: 16-650 rpmTiltingwheel Weight: approx. 7000 KgEquipped with1 Complete retrofit of the NC part and motorization in FANUC Oi-TD1 Tailstock1 Cooling system with magnetic separator and paper filtrationDimensions and weightMachine: 4700x2600xH2100mm - bin: 1600x1200 - cabinet: 600x1500mm - 1 pallet - weight 10 000kg Auction-ID: A1-50950-73

USED KLEIN CENTER STITCH GRINDING MACHINE Max. length between tip: 1200 mmDimensions and weight1 Euro pallet weight 400 kg Auction-ID: A1-50950-35

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6ASerial No.: C759.07Year: 2007Workingwheel Outer diameter of the grinding wheel: 610 mmEquipped with1 CN SIEMENS SINUMERIKNumber of CNC axes: 61 Gantry loading and unloading between the grinding wheels1 Double control wheel carriage driven by 2 Bruschless motors1 Bruschless motor on the spindle2 CNC diamond cutters with dimension adjustmentDimensions and weightMachine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-15

USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6ASerial No.: C691.04Year: 2004Workingwheel Outer diameter of the grinding wheel: 610 mmEquipped with1 SIEMENS SINUMERIK CNNumber of CNC axes: 61 Gantry loading and unloading between the grinding wheels1 Double control wheel carriage driven by 2 Bruschless motors1 Bruschless motor on the spindle2 CNC diamond cutters with dimension adjustmentDimensions and weightMachine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-17

Used VOUMARD 6A grinding machineMaximum diameter to grind: 300mmDiameter of the workpiece plate: 400 mmMaximum table stroke: 600 mmTable speed: 10000 mm/minSpindle diameter: 120 mmSpindle speed: 20000 RPMGrinding depth: 350 mmEquipped with1 Grinding machineDimensions and weight2600x2000xH2000mm - weight 4500 kg + 1 pallet europe weight 250 kg Auction-ID: A1-50950-79

USED CENTERLESS MICROREX GRINDING MACHINE type 2HWheel width: 200 mmEquipped with1 Strip door for diving1 Manual and automatic manual and automaticdripping work 1 Hydraulic diamond cutting Auction-ID: A1-50950-49

USED STUDER S20-2 CYLINDRICAL GRINDING MACHINESerial No.: 1291.75Distance between tips: 650 mmTip height: 100 mmEquipped with1 Counter point1 Sensitrondevice 1 Indoor device Auction-ID: A1-50950-74

USED GIUSTINA TYPE 114/500 GRINDING MACHINEYear: 2004WorkingWheel Outer Diameter of Wheel: 610 mmInner Diameter of Wheel: 305 mmWidth of Wheel: 500 mmCheck WheelOuter Diameter of Wheel: 356 mmInner Diameter of Wheel: 152.40 mmWidth of Wheel: 500 mmStrokesFast Diving Stroke: 3.6mm maxiPlunge working stroke: 1.5mm maxiDimensions Weightof the machine: about 12,000 kgEquipped with1 Magelis TelemecaniquePLC 1 Marpossstyle diameter controller 1 Conveyorbelt feeding system 1 Conveyor belt partsunloading system 2 Hydraulic diamond cutters with automatic dimension adjustmentDimensions and weight4500x2200xH1500mm - weight 12000 kg Auction-ID: A1-50950-21

Checked and ready to work Auction-ID: A7-50988-112

Checked and ready to work Auction-ID: A7-50988-115