Matkap taşlama makineleri

drill diameter: 2 - 26 mmturning speeds: 2800 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 190 kgrange L-W-H: ca. 1200 x 800 x 1400 mmElectric 380 Volt: Cooling equipment: Grinding wheel: Chuck: 6 -Backen Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10120Manufacturer: BRIERLEYStorage location: HalberstadtCountry of origin: DeutschlandWorkspace: 2,5- 32 mm

CHRISTEN Drill Grinding Machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Drill grinding machine: Make: Michael Deckel Modell: SO S/N: 22822

grinding diameter max.: 50 mm workpiece length: - mm table adjustment: - mm x-travel: 250 mm y-travel: 170 mm z-travel: 140 mm number of spindle speeds: 2880 rpm height over floor: 1000 mm total power requirement: 3.0 kW weight of the machine approx.: 329 kg dimension machine approx. LxWxH: 0.95 x 1.15 x 1.35 m dimension coolant device: 0.6 x 0.24 x 0.5 m transport dimensions LxWxH: 1.0 x 1.0 x 1.4 m

dia. of draw-in collets: 20 mminternal taper of cone draw-in collets: MK max. radius to grind: 10 mmgrinding wheel diameter: ca. 100 mmgrinding width: ca. 25 mmtotal power requirement: 0,6 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 0,4 x 0,4 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: . mmdrilling length: . mmlip angle: . °total power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,5x1x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2 - 20 mmdrilling length: - mmlip angle: einstellbar °turning speeds: 2800 U/mintotal power requirement: 0,12 kWweight of the machine ca.: 22 kgdimensions of the machine ca.: 370 x 310 x 260 mmelectric 230 volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 5-80 mmspindle speeds: 8,12,15,23 U/minlip angle: 50-180 °grinding wheel dia. x width: 300x70 mmgrinding wheel hole diameter: 51 mmtotal power requirement: 2 kWweight of the machine ca.: 1030 kgdimensions of the machine ca.: 1.45x1.3x1.4 mspeeds: 1450 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

May SS80 U Machine can be visited by arrangement under power

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

drill diameter: 2 - 13 mmdrilling length: ca.160 mmlip angle: 90 - 135 °total power requirement: 150 Wweight of the machine ca.: 8,5 Kgdimensions of the machine ca.: 20 x 40 x 20 cm Grinding range from 2 - 13 mmAccesories: CBN grinding wheel for HSS tools ER 29/12 pliers set 12 pieces from 2 - 13 mm, increasing by 1 mm,double slotted for intermediate sizes Operation manual Spare part listThe machine can be demonstrated in our company.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mmdrilling length: x mmlip angle: 40-180 °weight of the machine ca.: 0.4 tDressing devicePoint thinning attachmentMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - easy operation - Grinding process by means of gear motor - Twist drill dimensions 3 to 50 mm - Sharp angle 90 - 140 ° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gear motor for swivel movement 400 V / 0.12 kW - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - clamping device - Presetting device - Suction

Drill grinding machine 3 -50mm. 90° - 140° , free angle and grinding style freely adjustable, T 810 / W 570 / H 1260mm , 120kg ; 380 V/ 50Hz ;

drill diameter: 3 - 50 mmdust exhaust: inklusive : inklusive : : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 3 - 50 mmdrilling length: 500 mmlip angle: 90 - 140 °weight of the machine ca.: 120 kgdimensions of the machine ca.: 850 x 600 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 40 mmturning speeds: 2800 U/minlip angle: 60 - 180 °relief angle: 3,0 - 25 °tool length - max.: 344 mmtotal power requirement: 0,85 kWweight of the machine ca.: 238 kg.range L-W-H: 0,86 x 0,66 x 1,19 mElectric 380 Volt: Base with extraction system: Grinding wheel: 200 mmTwist drill grinding machine for right-hand twist drills, bores with 3 or 4 cutting edges. Tool holder - cylinder or taper shank. Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: für max. 60 mm Bohrer weight of the machine ca.: 389 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatic grinding of right-cutting, 2-edged twist drills with cylindrical shaft or MK shaft. Accessories: Wet grinding device. Pulling device 5 chucks, 1 grinding wheel holder,, Grinding area: 2.5-20mm, Point angle: 60 - 180°, Tool holder conical: MK1 - MK6, Cylindrical: Chuck 5 - 25 mm, automatic feed: 0.008 - 0.04 mm per tool revolution, Max. Tool length: up to 550mm, Grinding wheel diameter: 203 x 10 x 32 mm, number of revolutions: 2800 rpm, Connected load: approx. 1.25 kW (400 V / 50 Hz), mass: approx. 94 kg, Dimensions W x D x H: 520 x 900 x 1250 mm, colour: green RAL 6011, Grinding wheel (standard): 230 x 50 x 123 mm, speed: 2700 rpm, weight: approx 490 kg