Üretici:
(kategori: 108)
Welding table \"SIGMUND Professional 750 + Plasma Nitrided\" is made of high-quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm increments on the table top, parallel hole arrangement in 50 mm increments on the sides.Incl. basic foot equipment. Without accessories shown. Table length 2000 mmTable width 1000 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.75 tDimensions L x W x H 2.0 x 1.0 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-17
Basic set 2: 51 pieces, 28mm system, consisting of:Clamps: 8 x 280604Bolts: 12 x 280511Fence: 8 x 280420.NAngle: 4 x 280110.GThreaded bolts 8 x 280543fence 8 x 160415fence 2 x 284050Accessory set. 1 x 163999 Condition: never used / new (5) Auction-ID: A7-44764-163
5 pcs screw clampsfor hole diameter 28mmprojection max. 245mmHandle made of aluminumsee pictures Condition: never used / new (5) Auction-ID: A7-44764-243
Siegmund Set 2, 57 pieces, 28mm system, consisting of:18x quick-release bolts with twist lock short, without O-rings 6x universal stop 150 L - Nitrided 6x universal stop 225 L - Nitrided 4x stop and clamping angle 175 L - Nitrided 2x stop and clamping angle 300 G left - Nitrided 2x stop and clamping angle 500 G left - Nitrided 4x prism Ø60-135° burnished - with collar complete with shovel collar and countersunk head 6x Professional Screw Clamp - Nitrided 4x Professional Screw Clamp 45°/90° - Nitrided 4x Magnetic Bolt Aluminium 1x Accessory Set (283999) consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Probe CleanBasic, Probe Non-Stick and Torch Holder. Condition: never used / new (5) Auction-ID: A7-44764-144
Scribing tablewith groove 22 x 22mmTable surface 1600 x 800mmTable height 890mmWeight 800Kgsee pictures Auction-ID: A7-44764-249
Welding table with accessories:- Table size: 2400x1200x200 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Bore Ø 28 mm- Holes surface 100x100 mm- Corners, edges and holes chamfered 45°- Height of sidewall 200 mm- Holes sidewall in diagonal grid- Construction reinforced by ribsAccessories:- 6x 280610.N screw clamp- 12x 280511 quick-release bolts- 8x 280420.N universal stop- 2x 280110.N stop and clamping angle- 2x 280162.N stop and clamping angle- 1x 283999 care set Table length 2400 mmTable width 1200 mmTable height 850 mmHeight adjustment 50 mmMachine weight approx. 0.99 t Auction-ID: A7-44764-14
Included: 3 m hosepackMethod: MIG/MAG welding (metal inert gas/metal active gas)Power: Adjustment range from 40 to 400 amps Duty cycle: 60% ED at 400 amps. Auction-ID: A1-44739-17
-Power consumption 12 kVA -Welding power source QINEO QINTRON 400 Pulse -Rotary table 1-axis integrated rotary table with clamping plate -Robotic arm 6-axis industrial robot (CLOOS-branded, probably KUKA base) - Safety enclosure Fully encased with safety window & suction nozzle -Teach Panel handheld control unit with CLOOS UI, clearly visible -Exterior trim Very good condition, minimal paint abrasion visible -Interior Clean, no visible abrasion or weld spatter -Robot arm Visually almost as good as new, without visible damage -QINTRON 400 Pulse welding machine (modern pulsed arc technology) – in good condition - Control unit Teach Panel intact & connected, no error messages visible -Turntable Mechanically stable, without visible wear Auction-ID: A1-44719-1
Welding current: 30 to 430 ampsMains voltage: 400 volts (3-phase) Duty cycle (ED): 40 % at 430 A, 60 % at 360 A, 100 % at 280 ADegree of protection: IP 23Insulation class: FIncluding: 3 m hosepack Auction-ID: A1-44739-19
Variable rpm quick release plate foot pedal Auction-ID: A1-43823-15
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tilting and lifting welding table, clamping slots Overall dimensions 800x500x800 mm Auction-ID: A7-44061-16
: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 €: 153.44 €: 1 : 47 to: 110 mm: 27 mm: 25x18 mm: 8 s: 16 mm: 700 bar: 479 mm: 135 mm: 388 mm: 117 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kaynak gücü: 40 - 350 / 12 - 40 A/Vopen devre gerilim: max. 56 Vvoltaj: kaynak akımı: %100: 300 Tel hızı: 0 - 24 m/mina kapasite: 15,9 kVA Voltaj: 3 ~ 400 Vfrekans: 50 Hz Soğutma sıvısı:: F Koruma sınıfı: IP 23 makinenin ağırlığı ca.: 153 + 22 kgMakinenin boyutları ca.: 1,10 x 0,60 x 1,15 mKaynak makinesiCLOOS - GLC 353 MC 3- dahil. Tel Sürücü Birimi CLOOS - CK98 Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
current intensivity: 140 Aplate thickness: 1,5 mmwelding range: CO2: 35 - 225 Awelding range: 30Ar+CO2: 30 - 250 Aweight of the machine ca.: ca. 90 Kgdimensions of the machine ca.: 0,4 x 0,8 x 0,8 mCondition: ready for operation: Electric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working area: 500x300 mmwork height max.: 100 mmWeight: 120 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Special Item: Messeeinsatz table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.400 kgTrade Fair TABLESlight signs of wear on the surfaceWelding table:- 6 legs - basic equipment 650 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Side cheek made of high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilled holes Surface in diagonal grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2.400 € 
