Üretici:
(kategori: 108)
Welding turntable with- With integrated tripod and universal torch holder- Quick-release chuck 200mm- Foot switch- Tilt/swivel by hand- Speed infinitely adjustableTable diameter 315 mmTable load horizontal 50 KgTable load vertical 25 KgChuck diameter 200 mmSpeed 0 - 5 infinitely variableSwivel range 90 degreesTilt adjustment: manual/mechanical manual Connection voltage 230 VMachine weight approx. 45 KgSpace requirements approx. 800 x 600 x 600 m Auction-ID: A7-44764-12
Electrode furnace:Capacity 10 KgInner dimensions (LxWxH) 135 x 80 x 480 mmPower 0.5 kwConnection voltage 220 - 240 VAdjustment device 30 - 180 degreesWeight 15 kgDimensions L x W x H 600 x 250 x 200 mm Condition: never used / new (5) Auction-ID: A7-44764-176
Soldering iron in metal casesee pictures Auction-ID: A7-44764-20
Basic set 2 / 32 piecesfor table top thickness 15 and 25mm6 pcs screw clamps12 pcs quick clamping bolts2 pcs universal stop 100mm4 pcs universal stop 150mm2 pcs universal stop 225mm2 pcs stop and clamping angle 175mm1 pc hole brush 300mm1 pc torch holder1 pc non-stick spray 500ml, natural, biological basis1 pc welding table cleaner 500ml, natural, biological basis Condition: never used / new (5) Auction-ID: A7-44764-156
Special set 96 pieces consisting of:1x tool trolley30x quick-release bolt with twist lock short, without O-rings8x universal stop 150 L - Nitrided4x universal stop 225 L - Nitrided8x stop and clamping angle 175 L - Cast iron2x stop and clamping angle 500 G left - Nitrided1x stop and clamping angle 750 G left - Nitrided1x stop and clamping angle 750 G right - Nitrided1x stop and clamping angle 500 G left - Nitrided1x stop and clamping angle 500 G right - Nitrided4x stop and clamping angle 300 G left - Nitrided8x prism Ø60-135° burnished - with collarcomplete with blade and countersunk head16x Professional screw clamp - Nitrided6x Professional screw clamp 45°/90° - Nitrided4x universal stop 300 - Nitrided1x accessory set consisting of: eccentric, Allen key, brush, whetstone, Probe CleanBasic, Probe non-stick and torch holder. Condition: never used / new (5) Auction-ID: A7-44764-151
Welding turntable with- large passage 165mm- foot switch- motorized tilting- speed infinitely adjustable- 250 ampere welding current transmission Documentation in English.Table load 500 kgTable load 250 kg. verticalTable diameter 550 mmSwivel range 135 (-45 - +90) degreesSpeed 0 - 5 infinitely variable rpmConnection voltage 230 VTotal power requirement 0.8 KWMachine weight approx. 0.255 tSpace requirement approx. 0.82 x 0.73 x 0.71 m Condition: never used / new (5) Auction-ID: A7-44764-122
table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Welding turntable with - foot switch- tilt/swivel by hand - speed infinitely adjustable - 250 Ampere welding current transmission Table diameter 300 mmTable load 50 KgSwivel range 90 degreesSpeed 1 - 12 infinitely variable rpmTable load 50 kg verticalTotal power requirement 220 kWMachine weight approx. 0.036 tSpace requirement approx. 0.45 x 0.43 x 0.38 m Condition: never used / new (5) Auction-ID: A7-44764-91
Welding rotary tilting table radio remote control - 2 x welding current transmissionTable diameter 1000 mmTable load 1200 kgSwivel range 0 - 135 degreesSpeed 0.1 - 1.0 rpmTotal power requirement 1.5 kWMachine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-44764-74
Welding turntable incl. - Foot switch- Cable remote control- Chuck 315mmTable diameter 600 mmTable load 250 KgSwivel range 0 - 135 degreesSpeed 0.03 - 2.0 rpmConnection voltage 400 VWeight 0.4 tDimensions LxWxH 1.1 x 0.9 x 1.0 m Auction-ID: A7-44764-19
Siegmund workbench incl. accessories - consisting of screw clamps, hand clamping bolts, surface clamping bolts and brackets.- Frame made of aluminium profiles- Working height 900 mm- Surface made of aluminium table profiles- Bore Ø 16 mm- Bore spacing 50 mm- Hexagon groove HX8- Hexagon groove spacing 50 mm- When clamping aluminium parts, the bolts may only be tightened by hand.Table length 1200 mmTable width 700 mmTable height 900 mmTable load 250 KgMachine weight approx. 36 KgDimensions L x W x H 1.2 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-44764-121
Features• Self-aligning for several diameters• Infinitely adjustable speed of the drive unit• Polyurethane coating of the rollers• Optimal load distribution (4 rollers/unit), particularly gentle on workpieces with low wall thickness and sensitive surface• High stability due to solid construction of the machine• CE certificate• Very good price-performance ratio• Remote control on the cable• Documentation in EnglishLoad capacity 5 tWorkpiece diameter 300 - 2500 mmDrum diameter 250 x 100 mmFeed rate 100 - 1000 mm/minTotal power requirement 0.75 kWWeight 0.6 tDimensions L x W x H 1.5 x 1.0 x 0.6 m Condition: never used / new (5) Auction-ID: A7-44764-200
10 pcs. quick clamping bolt - 28mm hole system - for 25mm table thicknessNumber 10 pcs. Clamping range 25 mmHole diameter 28 mmWeight 10 kgDimensions L x W x H 0.3 x 0.3 x 0.2 m Auction-ID: A7-44764-149
Welding table accessoriesP-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of:Clamps: 5 Sk.100/350 mmStop: 2 pieces 500mmStop: 2 pieces 150mmAngle: 2 pieces 175 x 175 mmFlat angles: 2 pieces. 350 x 250 mmFlat angles: 2 pieces 275 x 150 mmEccentric washers 2 pieces 100mmQuick clamping screws: 10 pcs.Number 33 positionsWeight 52 kgCondition newHole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-44764-174
Welding turntable with- quick-release chuck 65mm- foot switch- tilting/swivelling by hand- speed infinitely adjustableTable diameter 180 mmTable load horizontal 10 KgTable load vertical 5 KgChuck diameter 65 mmSpeed 2 - 10 rpmSwivel range 90 degreesTilt adjustment: manualConnection voltage 230 VMachine weight approx. 15 KgSpace requirement approx. 400 x 400 x 400 mm Condition: never used / new (5) Auction-ID: A7-44764-82
Welding table on lift table: Hole diameter: 28mmThe table is made of 15mm thick steel S355The surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Sidewalls 150 x 10mmRibbed underside for reinforcement.Table length 2000 mmTable width 1000 mmLoad capacity 2000 kgLifting height max. 1525 mmTotal connected load 1.5 kWConnected voltage 400 V Condition: never used / new (5) Auction-ID: A7-44764-2
10 pcs Quick Clamping Bolts for 28mm SystemPlate Thicknesses 25mmNumber 10 Hole Diameter 28 mmWeight 10 kgDimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-44764-244
Welding helmetProtection level 4 - 12 MPower supply 2 x CR2032 Weight 460 gramsDimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-44764-152
Welding-turning-tilting table- Remote control- Welding current transmission max. 500 amps- Face disc passage 80mmTable diameter 650 mmTable load 600 KgSwivel range 90 degreesSpeed 0.2 - 3.0 rpmTotal power requirement 0.55 + 0.4 kWMachine weight approx. 0.28 t0.85 x 0.75 x 0.75mDocumentation in English. Condition: never used / new (5) Auction-ID: A7-44764-239
Roller block- self-aligning- left/right rotation- new control- foot pedal- emergency stop deviceLoad capacity 20 tWorkpiece diameter 1500 - 3500 mmDrum diameter 250 x 100 mmFeed rate 100 - 1400 mm/minTotal power requirement 0.75 kWMachine weight approx. 2.5 tDimensions LxWxH 2.5 x 1.5 x 1.5 m Auction-ID: A7-44764-5
XXL starter package, consisting of:- 15x – Standard clamping pliers- 5x – Multi-clamping pliers- 10x – Side clamp with eccentric- 15x – Loose cam H30- 10x – Loose cam H100- 2x – Pipe insertion knock series- 10x – Quick release bolt- 10x – Stop block 15mm- 4x – Right angle XL- 6x – Right angle- 6x – Angle of attack- 1x – Box- 1x – Insert holder- 1x – Allen key- Tool trolleyNumber 100Positions Hole diameter 28 mmCondition new Weight 280 kgDimensions L x W x H 1.2 x 0.5 x 1.3 m Condition: never used / new (5) Auction-ID: A7-44764-116
Set 5: 125-piece, 28mm system, consisting of:Clamps: 14 x 280610.NClamps: 10 x 280630.NPrism: 6 x 280648.1.NBolts: 36 x 160511Magnetic bolts 8 x 280740Stroke: 12 x 280410.NStroke: 12 x 280420.NStroke: 4 x 280430.NAngle: 12 x 160110.NAngle: 2 x 280152.NAngle: 2 x 280162.NAngle: 1 x 280164.NAngle: 1 x 280165.NAngle: 1 x 280166.NAngle: 1 x 280167.NAngle: 1 x 280144.NAngle: 1 x 280146.NCarriage: 1 x 280910Accessory set. 1 x 283999Number 106 PositionsWeight 283 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-235
Basic Set 1 37-piece, 28mm system, consisting of:Clamps: 4 x 280604Bolts: 8 x 280511Stop: 6 x 280420.NAngle: 2 x 280110.GThreaded bolts 8 x 280543stop 8 x 160415accessory set. 1 x 163999hole diameter 28 mmCondition new Weight 29 kg Condition: never used / new (5) Auction-ID: A7-44764-135
10m Screw clampsProjection 120mmLength 300 mmCondition newHole diameter 28 mm Number 10 positionsWeight 30 kgCondition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-44764-213
Welding table / hole table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 840 - 890mmunderside ribbed for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Table can be moved with pallet truck. Pallet truck is not included in the scope of deliveryTable length 1200 mmTable width 800 mmTable height 840 - 890 mmMachine weight approx. 0.3 t Condition: never used / new (5) Auction-ID: A7-44764-51
Welding table / hole table: Hole diameter: 28mmHole spacing 100mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Ribbed underside for reinforcement. Table length 4000 mmTable width 2000 mmHole diameter 28 mmTable height 815 mmMachine weight approx. 1.3 t Auction-ID: A7-44764-118
Welding table / hole table: with milled and deburred holesHole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T=15The surface is untreated.Side bolsters 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.incl. floor bearingaccessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Technical data:Table length 2400 mmTable width 1200 mmTable height 850 - 900 mmMachine weight approx. 0.65 t Auction-ID: A7-44764-129
Special set 31-piece, 28mm system, consisting of:1x tool trolley10x staking pin 10x ball lock pin3x Professional screw clamp, 300 x 150mm 3x Professional screw clamp, 300 x 200mm 2x Professional pipe screw clamp 180°2x Professional pipe screw clamp 45°Material: burnished quality steelATTENTION Tool is designed for 25mm table top thickness. Number 96 PositionsWeight 600 kgCondition newHole diameter 28 mm Auction-ID: A7-44764-132
Special set 80 pieces, 28mm systemMaterial: burnished quality steelScope of delivery see picturesNumber 80 PositionsWeight 150 kgCondition newHole diameter 28 mmDimensions L x W x H 0.8 x 0.6 x 0.5 m Auction-ID: A7-44764-177
Welding turntable with- large passage 65mm- foot switch- tilt/swivel by hand- speed infinitely adjustable- 250 amp welding current transmission - hole in face plate 65mm.Documentation in English only. Table load 110 KgTable load 55 kg. verticalTable diameter 250 mmHollow spindle Diameter 65 mmChuck diameter 200 mmSwivel range 0 / 30 / 60 / 90 degreesSpeed 0 - 8 infinitely variable rpmTotal power requirement 0.15 KWMachine weight approx. 25 kgDimensions approx. 0.5 x 0.53 x 0.6 m Condition: never used / new (5) Auction-ID: A7-44764-194
890 € 
