We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Peiseler EW 1000 reversible clamp Manufacturer: Peiseler Type: Reversible clamp Type EW 1000 Year of construction 1971 Face plate D = 1000 mm Clamping table 2500x500 mm Voltage 220 / 380 V Power 3.5 kW Item condition: used, impeccably and top maintained. Action components: Only the Peiseler EW 1000 reversible clamp, without the Webo BR 35 V / 1250 radial drilling machine, this can be purchased individually or as a combined offer in our other auctions. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.
used
Reversible clamp, rotary table, dividing apparatus PEISELER type 20.0000 No. 715 Table diameter: 500 mm Index pitch: 24 (15 )Bore in the middle of the table: 63 mm- readable degree scaling on the rotary table - lever for brake and snap-in pin - 20 mm T- slots - rotatable by hand or drive via center pin Dimensions L x W x H: 650 x 580 x 320 mm Weight: 230 kg good condition ; used
used
Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing head, dividing head, rotary indexing table -Model: AWH 355 -can be opened on one side -without hydraulic unit -with hydraulic valves -without control -controlled via cam switch -supported by angle plates for heavy machining -Clamping surface: Ø 350 mm -Center height: 350 mm -braked: hydraulic -powered: hydraulic -Hydraulic motor speed: 10-1500 rpm -Sweep volume: 20 cc/U -Dimensions: 680/360/H620 mm -Own weight: 290 kg
used
table diameter: 355 mm : Ø 850 mm table load: 0,6 t weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6x0,6x0,6 m - automatic reversing device mit tailstock and own control. - extension of 150 mm center for center height 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, dividing table, vertical dividing table -Manufacturer: Peiseler, clamping table part table type GT 320x320 -Table surface: 320 x 320 mm -T grooves: groove width 14 mm, groove spacing 100 mm -Spindle bore: Ø 30 mm -Dimension: 475/410/H125 mm -Weight: 85 kg
used
table length: 630 mm table width: 630 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical data Rotary table Execution: Horizontal/vertical Clamping surface: Diameter: 550 mm Dimensions: Length: 550 mm Width: 550 mm Height: 450 mm
used
table diameter: 800 mm : . table load: . t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m 4 jaw chuck 500 diameter The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. about us more than 500 machines in stock over 8500 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Chuck diameter: 1400 mm Chuck bore: 800 mm Number of jaws: 8 Horizontal: Horizontal Diameter: 1400mm Centre height:800mm Length: 1400mm Width: 1200mm Height: 1400mm Weight: 2500kg
used
Key data: 650 mm, 250 mm
Round Dividing Table Peiseler ATSP 630 Table size 650mm x 650mm Table height 250mm
used
Quick release, quick vice, drilling jig, machine vice, drill vice -Tension pad: 65 x 35 mm -Clamping height: max. 40 mm -Price: per piece -Number: 2x available -Dimensions: 120/80/H70 mm -Weight: 1.5 kg
used
Reversible clamp, rotary table, rotary indexing table, rotary table, dividing head, dividing head, rotary indexing table -Model: HW 250 -1 can be clamped on both sides -Angle display -Clamping surface: Ø 250 mm -braked -Dimensions: 300/500/H300 mm -Own weight: 40 kg
used
Clamping plate, measuring plate, measuring table, straightening plate, floating plate, transport plate, sliding plate -Manufacturer: Peiseler, floating plate -Top: 520/400 / H40 mm -Dimension box: 610/745 / H205 mm -Weight: 71 kg
used
Motorized turning traverse of the company MKF. By site closure in an absolutely new condition! The traverse was only used for about 10 strokes. The corresponding documentation is completely available. According to Caterpillar, the original price was about € 85,000.00. Details Type MKF 2MVGP Device No. 170803 Year of construction 01/2019 capacity 35,000 kg Dimensions 7.350 (L) x 1.500 (W) x 2.570 (H) mm Net weight 4.400 kg Ab. Load capacity 35,000 kg Suspension 2-str. Sling chain ø 26 grade 10 Load receptacles round steel chains ø 22 x 66 grade 10, approx. 6,996 mm circumference divided + swivel 175 mm + lock 66 mm Chain center distance 4,800 - 1,500 mm infinitely variable Operating voltage 400 V / 50 Hz Control voltage 24 V Turning speed approx. 3.5 - 4 m/min. Process speed approx. 3 m/min. Set-down device mounted on castors Rotating f ...
new
Heat pump / chiller air-cooled, switchable, reversible Type: HCYGNUS TECH HCY 171 PT1 MTA S.P.A. CYGNUS TECH HCY 171 PT1 are compact heat pump / water chillers suitable for outdoor installation up to -10°C suction temperature. Includes crank tub heating, buffer tank, built-in P1 circulation pump. Cooling capacity kW 36.5 Cold water temp. Outlet / Inlet: 7 / 12°C Volume flow m³/h 6.21 Available pump pressure bar 1.85 Ambient temperature °C 32 Heating capacity kW 43.2 Heating water temp. Outlet / Inlet: 45 / 40°C Volume flow m³/h 7.52 Available pump pressure bar 1.46 Ambient temperature °C 7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 power consumption (kW) 18,91 current (A) 33.67 Starting current circuit (A) 201.37 Protection class: IPX4 Dimensions: Depth mm 2104, width mm 1112, height mm 1477 Weight kg 620 C ...
new
Heat pump / chiller air-cooled, switchable, reversible Type: HCYGNUS TECH HCY 171 PT1 MTA S.P.A. CYGNUS TECH HCY 171 PT1 are compact heat pump / water chillers suitable for outdoor installation up to -10°C suction temperature. Includes crank tub heating, buffer tank, built-in P1 circulation pump. Cooling capacity kW 36.5 Cold water temp. Outlet / Inlet: 7 / 12°C Volume flow m³/h 6.21 Available pump pressure bar 1.85 Ambient temperature °C 32 Heating capacity kW 43.2 Heating water temp. Outlet / Inlet: 45 / 40°C Volume flow m³/h 7.52 Available pump pressure bar 1.46 Ambient temperature °C 7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 power consumption (kW) 18,91 current (A) 33.67 Starting current circuit (A) 201.37 Protection class: IPX4 Dimensions: Depth mm 2104, width mm 1112, height mm 1477 Weight kg 620 C ...
used
Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used
used
Reversible ratchet with outer square, with accessories KNIPEX 9842 outer square: 1/2 ( inch ) reversible 1x 9845125 - Extension: 125 mm 1x 9845250 - Extension: 250 mm 1x 984713 - socket wrench insert for hexagonal screws, width across flats:13 mm 1x 984717 - socket for hexagonal screws, Width across flats:17 mm 1x 984719 - Socket for hexagonal screws, width across flats: 19 mm 1x 984724 - Socket for hexagonal screws, width across flats: 24 mm insulated up to 1000 V used, tested ! Dimensions ( package): 300 x 100 x 60 mm
used
Drum turning pliers, drum grab PFEIFER, DENIUS type: 150247 load capacity: 300 kg gripping range: 400 - 620 mm fork distance: 390 mm ( center - center ) fork cross-section: 185 x 70 mm crane eye: 100 x 50 mm Material: steel, lacquered as good as new ! Dimensions: 1050 x 850 x 250 mm
used
Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-003 711 -Number: 2x clamping unit available -Price per piece -Dimensions: 700/335/H430 mm -Weight: 113 kg/pc.
used
Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing apparatus, dividing head, rotary indexing table Hydraulic rotary coupling -Manufacturer: Romheld, hydraulic reversible clamp with rotary coupling type 9284-826 908 -Number: 2x clamping unit available -Price per piece -Dimensions: 550/335/H400 mm -Weight: 90 kg/pc.
used
The WH-1512 G reversible reel is an automatic double-sided winding and unwinding reel for metal strips. While the metal strip is being unwound, the interlayer paper is wound up at the same time. The reel is suitable for coils with the following dimensions: - Outer width max. 150mm - Coil outer diameter max.1200 mm - Spool weight per side must not exceed 150 kg (full spool)
used
The WH-1512 G reversible reel is an automatic double-sided winding and unwinding reel for metal strips. While the metal strip is being unwound, the interlayer paper is wound up at the same time. The reel is suitable for coils with the following dimensions: - Outer width max. 150mm - Coil outer diameter max. 1200 mm - Spool weight per side must not exceed 150 kg (full spool)
new
Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...
used
clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.