presse usati in vendita (1,785)

stroke: 175 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 €: 400 to: 6050 mm: Y1 / Y2 / X und R Achse : 365 mm: 5100 mm: 510 mm: 630 mm: hydraulisch : 150 mm/s: 9 mm/s: 150 mm/s: 750 mm: 160 l: 7500 mm: 2110 mm: 3810 mm: 34600 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES, STEP, DXF files importservo motorized b ...

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 €: 3010.77 €: 320 to: 4050 mm: Y1 / Y2 / X und R Achse : 365 mm: 3600 mm: 410 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 160 mm/s: 650 mm: 500 mm/s: 250 mm: 900 mm: 154 mm: 5300 mm: 1910 mm: 3230 mm: 20100 kg1 SERVO MOTOR AND PUMP PER CYLINDER4 axes (Y1, Y2,X andR)CNC control SKY 22- intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD- with 2D and 3D working screen- direct programming of the bending angle- user friendly programming in dialogue form optionally in 2D or 3D mode- 2D and 3D simulation of the bending sequence- automatic tool selection in 3D mode- automatic calculation of the blank sheet size- bending order calculation- graphic product and tool memory- correction possibility- USB and Ethernet interfaces for import, backup and programm transportation- OS: Windows- IGES ...

pressure: 30 tstroke: 170 mmdistance spindle /table: max. 700 mmFront light range: 600 mmLateral light range: 195 mmweight of the machine ca.: 200 kgdimensions: 670 x 970 x 1900 mmDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 100920 €: 1907.39 €: 220 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 22 kW: 5250 mm: 1770 mm: 3000 mm: 14750 kgStandard accessories:3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning t ...

pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...

pressure: 1.000 tnominal power: 10.000 kNstroke length max.: 1.650 mmworking feed: 62 mm/secweight of tools max.: 40.000 kgvoltage: 400 Vtotal power requirement: 420 kWweight of the machine ca.: 254 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 €: 3237.57 €: 400 to: 4050 mm: Y1 / Y2 / X Achse : 365 mm: 3400 mm: 510 mm: 630 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 1050 mm: 154 mm: 250 l: 37 kW: 5750 mm: 2110 mm: 3640 mm: 27760 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010  ...

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4200x2200x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 19500 €: 374.4 €: 70 to: fix : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 980 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 72300 €: 1366.47 €: 40 to: 1250 mm: Y1 / Y2 / X und R Achse : 200 mm: 1050 mm: 250 mm: 440 mm: servomotorischer Spindela : 115 mm/s: 10 mm/s: 115 mm/s: 650 mm: 250 mm: 1000 mm: 7.2 kW: 1950 mm: 1450 mm: 2650 mm: 3600 kgSTANDARD EQUIPTMENT:servomotorized spindle drive4 axes (Y1, Y2, X and R)Color graphics controlDELEM DA-66S- 17 ", Touchscreen- 3D imaging in simulation and production- Suitable for personal Windows applications- Compatible with DelemModusys- USB and peripheral interface- Skill-specific application treatment- Sensor, bending and correction interfaceservo motorized back gauge on linear guides and ball screwsCNC crowning tableupper tool 1010 / A / 75 °, devidedand cranked4-V die block 60x60 2009 (V = 16,22,35 and 50 mm)laser safety device Fiessler AKASmounted on the upper beamlinear guided sheet support armsaccording to C ...

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 tPress force: 160 tBending length: 3,050 mmDistance between columns: 2,550 mmTable width: 220 mmThroat depth: 280 mmInstallation height (daylight): 440 mmMax. stroke: 250 mmTotal power requirement: 22 kWMachine weight: approx. 13 tAdditional InformationStroke speed:Downward (rapid approach): 90 mm/sPressing speed: 11 mm/sReturn speed (upward): 90 mm/sOperation: Two-hand control and foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tstroke: 400 mmdayligth: 900 mm: 1220 mm: 400 mmfeed down: 5,8 mm/secfeed up: 9,5 mm/secHeads: 200x125 mmtotal power requirement: 6 kWweight of the machine ca.: 1250 kgdimensions of the machine ca.: 1900x1000x2550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: - mmstroke: 8 - 116 mmtotal power requirement: 8 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 mNo. 0778Single-column eccentric press 1000 kNStroke adjustment 8-116 mm, stroke rate 65/min,ram adjustment 80mm,Space requirement2.1x 1.7 x 3.1 m,Weight approx. 7500 kgStand tiltable, 10°/20°/30°Working area: table 800 x 560Drive: 8 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28.0 tthroat: 225 mmstroke: 150 mmtable surface area: 325 x 300 mmwork speed: 2.0 - 9.8 mm/sekreturn speed: 12.8 mm/sektotal power requirement: 4.0 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1800 x 900 x 2000 mm- NC control to adjust the piston stroke- Selector switch for manual or semi-automatic operation- Flow control valve and pressure control valve- Integrated pressure gauge- Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 tdistance between columns: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: - mmstroke: - mmtotal power requirement: - kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2 x 2 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 370 mmstroke of upper beam: 200 mmthroat: 500 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 900 mmback stop - adjustable: max. 500 mmControl: CYBELEC oil volume: 150 ltotal power requirement: 15.0 kWweight: 12000 kgrange L-W-H: 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition () Includes optional equipment- in checked conditions - machinevideo - https://www.youtube.com/watch?v=pleltYCkXDQEquipment:- Electro-hydraulic CNC press brake- With DELEM CNC control unit Swiveling control panel (front right) Tool & program library Simple CNC programming- CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC motorized backgauge (X-axis) With 4x manually adjustable stop fingers (Z-axis)- CNC motorized height ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tthroat: 200 mmstroke: 0 - 60 mmtable:: 400 x 600 mmtable:: 150 mm - Bohrung no. of strokes: 140 Hub/minbore: 40,0 mm - Werkzeug compressed air: max. 6,0 bardayligth: 300 mmtotal power requirement: 3,0 kWweight: 1.670 kgrange L-W-H: 1150 x 1350 x 2050 mmFurnishing:- Welded steel structure body frame- AISI 4140 (42CrMo4) alloy steel crankshaft- CNC ground for maximum precision SnBz-12 quality- Bronze bearings, ground for minimal surface resistance- 4 sides pneumatic clutch-brake combination- PLC control for safety (PILZ Germany)- Photo cell light barriers around the work table (PILZ Germany)- Two-hand and foot pedal control- Adjustable stroke- Central lubrication system- CE safety approval by TÜV- electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRONThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tstroke: 400 mmtable-size: 1150 x 350 mmdiameter of piston: 300 / 185 mmthroat: 225 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/sectotal power requirement: 14 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mPress force: 160 tStroke: 400 mmTable size: 1,150 × 350 mmCylinder diameter: 300 / 185 mmThroat depth: 225 mmPressing speed: 6 – 16 mm/sRapid approach speed: 75 mm/sReturn speed: 208 mm/sTotal power requirement: 14 kWMachine weight: approx. 8.5 tPressing speed: 6 – 16 mm/sRapid approach speed: 75 mm/sReturn speed: 208 mm/sInstallation distance between ram pressure pad and crosshead pressure pads: 320 mmDistance between pressure pads on ram and table: 50 – 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4100 mmControl: CYBELEC DNC 900 stroke: 260 mmweight of the machine ca.: 16.000 kgdimensions of the machine ca.: 4500x2400x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 86300 €: 1631.07 €: 150 to: 300 mm: 950x650 mm: 1200x750 mm: 550 mm: 100 mm/s: 5,5 mm/s: 165 mm/s: 11 kW: 2200 mm: 2200 mm: 3250 mm: 8200 kg4-pillar guidetable and ram with T-slotsmanual stroke adjustment via cam switchmanual and automatic operationfront light barriersaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tthroat: 360 mmtable-size: 1.250 x 630 mmtable diameter: 250 mmdimension of ram: 850 x 450 mmdayligth: 800 mmpiston stroke: bis 500 mmdiameter of piston: 400/360 mmram stroke speed: abwärts 200 mm/secram stroke speed: aufwärts 110 mm/sectotal power requirement: 20,5 kWweight of the machine ca.: 8 tPress force: 250 tThroat depth: 360 mmTable size: 1,250 × 630 mmTable opening diameter: 250 mmRam clamping surface: 850 × 450 mmInstallation height (daylight): 800 mmRam stroke: up to 500 mmMain cylinder diameter: 400 / 360 mmRam speed (downward): 200 mm/sRam speed (upward): 110 mm/sTotal power requirement: 20.5 kWMachine weight: approx. 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.