ORMA macchina utilizzata in vendita

Incollatrice e via a dischi ORMA a norme CE Incollatrice a 4 rulli modello I/413 con: - larghezza utile di lavoro 1300mm - altezza utile di lavoro 100mm - doppia motorizzazione, kw 0,75+0,75 - rulli spalmatori D=250mm - rulli dosatori D=180mm - con lavatore automatico a spazzole Via a dischi con: - misure utili di lavoro 3000x1300mm - variatore meccanico di velocità - con fotocellule finali Anno 2007 , macchine a norme CE.

Pressa per scaffali ORMA NPC 300 6/110 Dimensioni ripiano 3000x1300mm Numero di pistoni idraulici: 6 Diametro stelo pistone 70mm Pressa riscaldata con acqua Certificato CE

INDICAZIONI: 01 Pressa idraulica ORMA LS/R-45/13 Dimensioni: 4500 x 1300 mm 08 Pistone Ø 70 mm 02 Pistone con pistone a pignone e cremagliera Corsa: 200 mm 01 Trasportatore a rulli di carico 4500 x 2200 mm 01 Rulliera di scarico 4500 x 1300 mm (con arresto) ACCESSORISTICA: 01 Generatore HF con 40 Kw 01 Incollatrice a doppio rullo 01 Manipolatore ELEPHANT 200 kg Lunghezza: 4000 mm

SECOND-HAND HOT PRESS ORMA MOD. NPC-6/100 - New PLC with TOUCH SCREEN - Platens dimensions 2500X1300 mm - Additional plate - N. 6 cylinders - CE rules - Year 2001 - Kw 2.2 - Complete with manual and CE certificate

INDICAZIONI: Pressa idraulica a caldo Dimensioni del piano di lavoro mm: 3.000 x 1.300 Tavolo serpentino montato Temperatura massima: 120°. Numero pistoni: 6 diametro Ø 65 mm Potenza installata KW: 30,5 Completo di piastra intermedia Funzionamento dell'olio diatermico Completo di caldaia elettrica a gasolio

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Maximum panel dimensions (for 3D wrapping) 1240x2740 mm Pressing cylinders 6 pcs Piston diameter 140 mm Piston stroke 190 mm Total maximum counter pressure 200 T Pneumatic pressure at work (max) 5 Kg/cm Room height 160 mm Upper and lower flange 40 + 20 mm Part size / manual pin placement area (maximum) 1250x2550 mm Minimum foil width 1400 mm Minimum plate thickness 15 mm Working height (distance from the floor to the level of the loading tray) 930 mm Maximum temperature of the heating liquid 130°C Air tank capacity 500 liters Total installed power 50 kW Dimensions (L x W x H) 11500x2950x2550 mm Weight 12800 kg In accordance with CE standards

3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory.