Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
Working width: 3450 mm Working height: 2000 mm Number of cylinders: 5 St. loading dimensions L x W x H: 3600 x 1200 x 2720 mm Hess Multipress Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stro ...
Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sanding machine -------------------------------- Machine in checking process at the moment! Basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. All guides as a ball linear set on hardened and polished waves. Permanent precision thanks to dust and dirt protection the ball linear sets. Contact roller and sanding pad in a balanced ratio for sanding belt grain load. The la ...
Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----------------------------------------------------- Manufacturers description: ----------------------------------------------------- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the dust-tested certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrate ...
Working width: 3500 mm Working height: 2550 mm Number of cylinders: 6 St. loading dimensions L x W x H: 4500x950x2900 mm Hess Speedy frame press -------------------------------------- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and press ...
Working width: 3500 mm Working height: 2500 mm # 6913 Hess Quickstep frame press --------------------------------- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) -------------------------------------- General --------------------------------------- Working width: 3500 mm Working height: 2500 mm Features: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - t ...
Manufacturer: Hess, Type: Junior, Year: ca1987, Control: L/L, Software: yes, Barcode: 190, Monting of the machine: 4 - 150, Equipment of machine 2: 2, Double sided sanding line: 5 - 25, Steel roller: yes, Steel roller: yes, Belt 1 shoe unit: 5,5, Belt 1 combined unit: 5,5, Band 2 Kombiaggregat Walze/Schuh: 1, Band 2 Innenliegendes Drucklamellenband : yes, Band 2 Schleifbandgeschwindigkeit m/s : 280, Belt 2 pressure segment belt: yes, Belt 2 synchronous and reverse run: yes, Band 3 Kombiaggregat Walze/Schuh: yes, Year :ca1987
Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000
Manufacturer: Hess, Type: Kantenpresse, Working length mm: 2500, Working widht mm: 2000, Carriage: yes, Pneumatik: yes, Cylinder: 80, Wight approx. kg: 300,
Manufacturer: Hess, Type: Kantenbügelpresse, Year: ca.1990, Pre-warming of massive edges and heating rod: 2, Working length mm: 4000, Working widht mm: 60, Carriage: yes, Tiltable design: yes, Pneumatik: yes, Cylinder: 8, Wight approx. kg: 300, Year :ca.1990
Manufacturer: Hess, Type: Mobil Kantenbügelpresse, Min.-max. workpiece height in mm: 60, Pre-warming of massive edges and heating rod: yes, Working length mm: 1.100, Working widht mm: 1.100, Carriage: yes, Tiltable design: yes, Cylinder: 2,
Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995
Manufacturer: Hess, Bauyeshr : 1997, Hydraulical/pneumatical: hydraulisch, Press length mm: 3800, Press hight mm: 2900, Machine rigging: hand, Wight approx. kg: 4000, Year :1997
pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;
A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible.
Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm
Pressa a telaio idraulica Hess Tipo: HYDRO-LUX Dimensione di crimpatio approssimativa L 3550 m x L 2250 mm Carico collegato 380 V / 50 Hz Pompa idraulica da 2,6 kW Dimensioni della macchina Lunghezza 6600 mm x Larghezza 1600 mm x Altezza 2770 mm Pneumatica 0 - 8 bar Domanda di misurazione optoelettronica. Le scantlings delle finestre sono posizionate nel canale di alimentazione in modo che il sensore fotoelettrico possa misurare se i fasci di pressione e gli angoli della pressa devono essere aperti o chiusi. Se il fascio luminoso della sonda colpisce le scantling delle finestre, la macchina riceve il comando di spingere verso l'alto in larghezza e altezza fino a raggiungere la dimensione di lavoro. Flusso di lavoro: Regolazione automatica delle dimensioni inserimento sciolto Processo di pressatura automatica Presentazione libera rimuovere Regolazione automatica d ...
Key data: 190 mm, 2
Macchina da molare HESS Macchina da molare a doppia faccia Tipo: GLORIA Anno di realizzazione: 1995 d.C. Larghezza di levigatura 190 mm Spessore di letinatura 4 – 180 mm Scarpa per carteggiare e spazzola dall'alto Carteggiare scarpa e spazzola dal basso Le ceramiche osside sono senza usura e quindi senza manutenzione Regolazione motorizzata dell'altezza con display digitale Lunghezza del pezzo più corta: 300 mm Nastri abrasivi oscillanti Ugello di soffiaggio per cinghia abrasiva Trasporto dei pezzi tramite nastri trasportatori Larghezza nestraio carteggiante: 200 mm x lunghezza nastro abrasivo: 1600 mm Motore di macinatura 2 x 4 kW Velocità di avanzamento variabile all'infinito 5-25 m/min. Motore di alimentazione 0,75 kW Regolazione dell'altezza 0,18 kW Velocità del nastro di carteggiatura 24 m/s. Altezza di lavoro – altezza del tavolo 830 mm Diametro dell'ug ...
Pressa a telaio Hess Tipo VARIANTE Macchina n. 2182 Costruito nel 1979 Pressa pneumatica a telaio Workspace 3700 mm x Altezza 2300 mm 4 bar con cilindri di pressione dall'alto Arresto lato sinistro 1 barra di pressione mobile da destra con 2 cilindri di pressione Corsa cilindro 110 mm Forza di compressione per cilindro 1100 kp (1kp = 1kg) Collegamento aria compressa max. 15 bar Peso circa 550 kg Dimensioni esterne 4400 mm x 700 mm x H 2800 mm Dimensioni di carico 4400 mm x 600 mm x H 2300 mm + Pallet con trave di pressione 2800 mm x 800 mm x H circa 700 mm
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja_yes boring of olive 1=yes, 0=no: 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill h ...
Stella di incollaggio con piastre riscaldanti. Collegamento 30 KW. Quattro superfici di pressatura. Idraulico, pneumatico. Seguiranno altre date.
Pressa per bordi Hess Tipo mobil 3000 Macchina n. M 2 2791 1538 Anno di costruzione 1991 Lunghezza di lavoro 3000 mm Pneumatico Larghezza della fasciatura 60 mm Campo di pressione 0 – 8 bar 6 cilindri di pressatura, piastra di pressione diametro 120 mm Mobile su ruote Versione pesante Elemento riscaldante 0 – 200 °C Dispositivo di preriscaldamento del bordo solido Lunghezza 3200 mm x larghezza 850 mm Peso circa 450 kg
Pressa a telaio Hess Descrizione tecnica: - 2 cilindri pneumatici a pressione in lunghezza - 2 cilindri pneumatici a pressione in larghezza - 2 portapezzi pneumatici - Larghezza di banda di alimentazione: circa 680 mm - Lunghezza del nastro di alimentazione: circa 3.400 mm - Area di serraggio: 680 x 1.400 mm - Pannello di controllo Dimensioni: - Lunghezza: circa 3.400 mm - Larghezza: circa 1.700 mm - Altezza: circa 1.400 mm - Peso: circa 800 kg
Cilindri di pressa telaio Hess andare con aria compressa 3 cilindri verticali e 2 orizzontali
