used WEEKE numerically controlled machining centres

CNC machining center WEEKE Type: BHC 280 Woodwop 5.0: Year: 2005 4 Axes

Specifications: Workpiece length: min 200 mm Workpiece length: max 3050 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 12 mm (for horizontal machining on the two transverse edges and on the upper edge), Note: When drilling horizontally from the lower edge, central drilling is only permitted up to a workpiece thickness of 19 mm. max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 50 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces. Drill gear V13 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2,800 rpm Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-chan ...

WEEKE BHX055 vertical machining center with tool changer Type: Weeke BHX 055 Operating hours: 4,340 hours Specifications: CNC controlled machining centre for drilling, milling and sawing & 4-fold tool changer Working range of axes: min. 200*70mm, max. 3,050*850mm Max. working thickness: 12-60 mm Max.Piece Weight: 35 KG Feed: X, Y: 50 m/min Z: 15 m/min Drilling V13: 5 drilling spindles for vertical drilling in the direction of "X" individually controlled 4 drilling spindles for vertical drilling on the upper side in the direction of "Y" individually controlled 4 Drilling spindle for horizontal drilling in the direction of "X" on the upper side individually controlled 2 drill spindle for horizontal drilling on the upper side in the direction of "Y" individually controlled Mill: 1 milling motor including HSK63 - motor power 5 KW-S1 ( 1,250 / 24,000 R ...

Specifications: Workpiece length: min 200 mm Workpiece length: max 2500 mm Workpiece width: min 70 mm Workpiece width: max 850 mm Workpiece thickness: min 12 mm (for flat machining) min. 16 mm (for horizontal machining) max. 60 mm Workpiece weight: max. 30 kg Speed of axes: Vector speed X/Y = 30 m/min Z = 15 m/min Features: Workpiece Document Area Mechanical support by means of a roller conveyor for workpieces. Workpiece removal area Mechanical support by means of a roller conveyor for workpieces Drill Gear V8 Feed stroke Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: right/left Speed: 2800 1/min, frequency controlled Propulsion: 1.8 kW Drill bit holder: d = 10 mm for Quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle spacing: 32 mm Spindle type: individually controllable power control PC85  ...

Manufacturer: Weeke, Type: BP 195 T, Year: 1996, Throuh running machine: yes, Working range X: 3200, Working range Y-axis: 1300, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, r.p.m: 18000, r.p.m: 18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Rollentisch: yes, Vacuum pumps m³/h: 120, Bohrer vertikal: 44, Auslegermaschine : yes, zwei getrennte Bohrgetriebe mit einzelnen Achsen Raster 32 mm, Year :1996

Description: Type of work Drilling Routing X axis working area 4250 mm Y axis working area 1500 mm Working Table Pod and Rail Main Electrospindle power 11 KW Number of controlled axes 4 axes Total number of drilling spindles 25 Total number of tool changer positions 26 X axis work area 4250 mm X axis travel 5050 mm Y axis work area 1500 mm Y axis travel 2150 mm X axis movement speed 80 m/min Y axis movement speed 60 m/min Z axis movement speed 20 m/min No. working fields 2 Working table yes Working table Pod and Rail No. of Rails 10 Pod Position Indicators yes Vacuum pump yes No. pumps 2 Single capacity 100 m3/h Boring units 1 BORING UNITS 1 Unit : top Vertical Boring Spindles : 25 Router Spindles 1 ROUTER SPINDLES 1 Unit : top No. controlled axes : 4 Motor power : 11 kw r.p.m. : 24000 RPM Grooving unit 1 GROOVING UNIT 1 Unit : top Grooving unit : yes Unit : Fixed for Grooving in X Max.  ...

Capacity in X (usefull): 5.250 mm Capacity in Y (usefull): 1.350 mm Capacity in Z : 100 mm Routers: 1 Main routing motor: 7,5 kW, spindle: HSK F63, C-axis Toolchanger with 12 places Vertical drills: 11 in X-direction, 11 in Y-direction Horizontal drills in X : 6 Horizontal drills in Y : 2 Machine table: 10 Supports with vacuum cups Software: Woodwop 4.0

Z-travel: 370mm, max. workpiece thickness: 100mm, connected load: 14-22kW.

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

Working dimensions 2750 x 1220 mm (X,Y) Main spindle 6 kW Drills 12V, 2+4 H Grooving saw 100mm in X axis Tool tray 6 places woodWOP 5.0 software CNC Simulator The machine had a regular service Laser cross for placement of suction cups Incl. documentation and backup SW

Description: Machine: Net working area:min 200x70 ,mm ,to max 3050x850 ,mm Workpiece thickness:12-60 mm Workpiece weight: max 35 kg Speed: X and Y: 50 m/min, Z: 15 m/min Drill aggregates: 5 Drill spindles for machining the top of workpiece in 'X direction'. All 5 bores are individually adjustable 4 Drill spindles for machining the top of workpiece in 'Y direction'. All 3 bores are individually adjustable 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 bores are individually controllable 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 bores are individually controllable Free aggregate - Motor 5 KW-S1 ( 1,250 / 24,000 rpm) Saw aggregate: Integrated saw aggregate - Cutting diameter 100 mm . Equipment: Programming and control system POWER CONTROL PC 85 + WOODWOP SOFTWARE - PC - TFT color screen ...

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Description: WEEKE BHX055 vertical machining centre with 4-fold tool changer Operating hours: 4,340 hours Technical Data: CNC controlled machining centre drilling, milling and sawing & 4-fold tool changer Net working area: min. 200x70 mm, up to max. 3,050x850 mm Thickness of workpiece: 12-60 mm Weight: Max. 35 kg  , Speed: X, Y: 50 m/min Z: 15 m/min  , Drilling V13: 5 Drill spindlesfor machining the top of workpiece in 'X direction'. All 5 drills can be controlled individually 4 Drill spindles for workpiece machining in 'Y direction'. All 3 drills can be controlled individually 4 Drill spindles for machining the side of the workpiece in 'X direction'. All 4 drills can be controlled individually 2 Drill spindles for machining the side of the workpiece in 'Y direction'. All 2 drills are individually controllable  , Free aggregate: 1 Free aggregate with HSK63 q ...

Description: Work table: X = 3250 mm (length) Y = 1220 mm (width) Z = 125 mm (thickness) CONSOLE TABLE WITH LED POSITIONING SYSTEM (DIODE LIGHT BAND) PROCESSING CONFIGURATION V12, H4X/2Y, N1, F1-HSK-15 KW, C-AXIS, W8 REAR, W8 FRONT Aggregates: HSK63 LOCK CASE, D=16 MM, 2 SPINDLES, HSK63 DRILL/MILLING INCLINABLE, CRANKED VERSION 10 pieces suction cups as per illustration 108651362_Suction cups (1) CE SAFETY AND PROTECTION DEVICE (not provided) - Protective grille in the side and rear area Protective grille only partially present, door present. MACHINE IN NEED OF REPAIR!!! DESCRIPTION: Machine throws up errors when starting up according to photos in the attachment. Missing error texts, diagnosis only starts when called up several times. Tool is changed, but cannot be stored in changer because changer because changer (system changer) is not referenced. Switch cabinet wired with vari ...

Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating system working width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x-axis: 9 pieces, drilling spindles vertical ...

Description: Dust-protected linear guide system Ball screw in X, Y and Z direction Digital drive system in X, Y and Z direction Stop cylinder for workpiece positioning Workpiece length: 200 mm - 3,050 mm 0245 / 0246 - Extension of the working length to 3,050 mm incl. roller conveyor Workpiece width: 70 mm - 850 mm Workpiece thickness: 8 mm - 60 mm 2999 - Machine-specific adaptation Workpiece weight: max. 35 kg 1202 - Drilling gear V13 High Speed Z-direction: 60 mm Drilling depth: max. 38 mm Direction of rotation: R/L Speed: 1,500 - 7,500 rpm - frequency-controlled Drive: 2.3 kW Drill bit holder: 10 mm for quick-change system Total drill bit length: 70 mm Drill diameter: max. 35 mm Spindle type: individually controllable 1128 - horizontal drilling gear with 4 spindles in X-direction 1129 - horizontal drilling gear with 2 spindles in Y-direction 1012 - Grooving ...

Description: • CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx. 18 KW • Useful working area approx. 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 7.50 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1.50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h  ...

Description: • CNC machining centre • Serial number 0-250-06-2992 • Total installed power approx. 18 KW • Useful working area approx. 3250 x 1300 mm • Travelling way X-axis: 3955 mm, Y-axis: 1685 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 9 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Saw unit to groove • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 11 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Software Windows / HOMAG WOODWOP • Remote control panel • 6 consoles with 22 vacuum suction cups in total • 5 lifting modules for heavy workpieces • BECKER KVT 3.100 ...

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3* 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3* 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3* 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

working length X: 2.500 mm working length Y: 1.300 mm : 4 - 80 mm Number of milling agregates: 2 St. Number of boring motors: 2 St. : 72 : 16 : 4 : 90° schwenkbar : 130 m/min : 80 m/min : 50 m/min : 27 m/min turning speeds: max. 18.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC-controlled drilling, gluing and duebel insertion machine Also suitable for drilling furniture connectors due to 3 controlled axes A video of the running machine can be sent on request. Working width max. 1250mm, for double occupancy 600mm with pneumatic center stop 4 pneumatic workpiece clamps Horizontal drilling unit with 3 individually retrievable drills, motor power 1.5kW Vertical drilling unit with 3 individually retrievable drills, motor power 1.5kW X-axis, Y-axis, Z-axis cnc-controlled As a result, quick changes between different material thicknesses are possible. Dowel length 30 and 35mm, currently set to 8x30mm Vibrating conveyor for wooden dowels Glue monitoring Glue quantity electronically adjustable Glue feed via double diaphragm pump Beckhoff controller with Industrial PC and colour screen Programming via WoodWop 5.0, with variable programming Work li ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Weeke Homag Sicherheitstrittmatten, Year: ca.1996, FREETEXT1: 7 Stück, FREETEXT2: 5 x 1000 X 1200, FREETEXT3: 2 X 600 X 1200, Year :ca.1996