used WEINBRENNER bending presses

Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m * 2m * 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.

Capacity: 250 tonnes Factory no. 233 A

For sale is: 1 Piece Used Hydraulic Press Brake Manufacturer: Weinbrenner Type: GP100 Year: 2000 Pressing force: 1,000kN Working length: 2,050mm Clear stand width: 1.550mm Stroke: 600mm Control: Cybelec Hours: 35,000 Incl. rich tools, see contents 2 pieces of white cabinets. Several folders of documentation available for the machine, Elt plans, control Cybelec,... Very neat condition. The machine can be viewed in our warehouse in 09599 Freiberg.

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration  ...

The machine is in good technical condition. Nominal forming force: 50t Max. sheet length: 3000mm Upon agreement, the possibility of inspection in progress.

Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050  

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 300 mm weight: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

pressure: 250 t chamfer lenght: mm throat: mm stroke of ram: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending length: 1250 mm Pressing force: 800 kN ram stroke 160 mm Hydraulic pressure: 255 bar Stop time: 110 ms Safety distance: 176 mm Input device (screen): Cybelec DNC 74 PS b Documentation available Max. pressing force: 82 to, bending length: 1,250 mm, stroke: 160 mm, weight approx.: 7,300 kg, Approx. Onsite Dimension. (l x w x h): 1,820 x 1,950 x 2,900 mm

Description: Bending length: 1250 mm Pressing force: 800 kN ram stroke 160 mm Hydraulic pressure: 255 bar Stop time: 110 ms Safety distance: 176 mm Input device (screen): Cybelec DNC 74 PS b Documentation available Max. pressing force: 82 to, bending length: 1,250 mm, stroke: 160 mm, weight approx.: 7,300 kg, Approx. Onsite Dimension. (l x w x h): 1,820 x 1,950 x 2,900 mm

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

AYEL-TECH PRESS BRAKE/WORKSHOP PRESS KBWP type 1050 x 100 ton -Capaciteit 1050 x 100 ton -Max Queen 1050 mm -Geeredschap -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . ..... Control repair needed! Details on sale!

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TTMC ABKANTPRESSE TYP 1300 x 30 Sound -Capaciteit 1300 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Manufacturer LOIRE SAFE Model ESSC 300/ 30-20 / 20-15 Year 2003 Press Maximum adjustable force 300 a 3.000 kN Return force 600 kN Max opening between fixed table and chuck 2.000 mm. Mobile chuck travel 1.500 mm. Dimensions of the lower mobile table Fontal 3.000 mm. Lateral 2.000 mm. Dimensions of the mobile chuck Frontal 3.000 mm. Lateral 2.000 mm. Machine weight without tools or accessories 63.000 kg. Speeds Approaching speed, without pressure 60 mm/s Working speed, adjustable by potentiometer 1 a 7 mm/s Demoulding speed, adjustable by potentiometer 1 a 35 mm/s Return speed 60 mm/s Tooling Dimensions Frontal 3.000 mm. Lateral 2.000 mm. Height 1.500 mm. Max weight Mobile part 18.000 kg Total 42.000 kg Accessories Upper plate with tilt system INCLUDED Movable lower table with tilt system INCLUDED Stop time and safety distance Stop time 123 ms Safety  ...