We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Offer 23435 Specifications: - Max. working length 1270 mm - Column passage 1040 mm - Max. pressing force 500 kN - Distance table / ram 410 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed rapid traverse 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 10 mm/sec - Total drive power 8 kVA - Pneumatic connection 6 bar - Space requirement approx. W 2000 x H 2400 x D 2100 mm - Weight approx. 4800 kg - with: - CNC control DELEM , DA 65 - Y1 + 2 ; X ; R ; Z - Footswitch - Controlled back gauge with height adjustment 5 - 500 mm - 2 support arms - hydr. Tool clamping - Matrix table displacement pneumatically supported
used
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
used
MACHINE IS GREAT WORKING CONDITION . INCLUDING TOOLINGS WEIGHT: 4300 KG YEAR: 1991
used
Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface
used
Inv. Num. : 6612 Type: Trumatic 500 Producer: Trumpf Created: 1955 Parameters: Operating hours: 69739 h Compressive force: 220 kN Maximum length of the sheet plate: 2500 mm Maximum blade width: 1250 mm Machine weight: 11050 kg 4 cassettes for a single tool and a cassette for a 6-way multitool
used
Used machine in good condition. Available for immediate delivery. - Pressure force: 60 t - Bending length: 2.080 mm - Axes: Y1 - Y2 - Z1 - Z2 - X - R - Distance between uprights: 1.750 mm - Working speed: 0-10 mm/seg - Returning speed: 180 mm/seg - Throat: 420 mm - Control: DELEM - Stroke max: 200 mm - Power: installed max: 11 kW - Weight: 4.900 kg - Dimensions (long x wide x high): 2.650 x 1.715 x 2.40 mm
used
Used machine in good condition. Available for immediate delivery. - Type: hydraulic - Backgauge movement: 800 (X) mm - Inclination of beam: +- 3 mm - Open Height: 1.000 mm - Pressure force: 120 t - Bending length: 4.080 mm - Axes: X, Y, R, Z1 & Z2 - Distance between uprights: 4.404 mm - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T3500T multi-touch control - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 15.000 kg - Dimensions (long x wide x high): 4.647 x 1.644 x 2.925 mm
used
Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT
used
This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a bending length of 2550 mm.
used
This TRUMPF TrumaBend V85X Bending machine was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a bending tool package. License for software, ToPs 600 for bending, included. See attached original tech specs positions as PDF (German).
used
This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the control system is broken.
used
This TRUMPF TruBend Center 7030 Bending machine was manufactured in the year 2019 in Italy and has 901 production hours. Contact us anytime for further questions
used
Press brake TRUMPF TrumaBend V 230 Year of construction: 2003 Working width: 3,000 mm Pressure: 230 To Stroke: 365 mm Operating pressure: 305 bar Delay time: 95 ms Safety distance: 190 mm Weight: 18.210 kg Voltage: 3 x 400 V Nominal current: 68 A Frequency: 50 HZ Connected load: 27.2 KVA Compressed air: 6 BAR Stop: 2 x X, 2 x Z, 2 x R – Axis, 2 x Y 1x sliding matrix
used
3000 x 1500mm 6000w Auto pallet changer Siemens 840 Beam on: 17429 Laser on: 34280
TrumaSort R4 Sorting of productions parts in 4 standardized containers
Capacity: 120 t Folding length: 3100 mm CNC Brand: Delem TRUMPF - TruBend 3120 CNC Pressbrake 3100 x 120 Ton Y1/Y2/X/R Axis MACH - ID 6370 Make: TRUMPF Type: TruBend 3120 Control: Delem YOP: 2010 Hours: 9000 Max. bending length 3.100 mm Distance between column 2.550 mm Max. pressing force 120 T Dis. Beam – Table 470 mm Beam stroke 340 mm Approch speed 200 mm Working speed 180 mm Return speed 180 mm Number of controlled axis 4 Power 11 kW Length 3.600 mm Width 1.750 mm Height 2.330 mm Weight 8.300 kg
used
Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price
used
Capacity: 130 t Folding length: 2690 mm CNC Brand: Delem MAKE TRUMPF Austria TYPE Trumabend V130 YEAR 2002 SPECIFICATIONS Controll DELEM Pressbrake / Folding / Mech. / Hydr. Pressbrake Hydraulic / Mechanical Hydraulic Bending length 3060 mm Distance between column 2690 mm Press force 130 Ton Throat 410 mm Stroke 365 mm Die height 535 mm Backgauge stroke X in mm 860 mm Number off controlled axis 6 Power 18.5 kW DIMENSIONS Length 4000 mm Width 3000 mm Height 2800 mm Trumpf CNC Pressbrake TRUMABEND V130, we have more Trumpf machines in stock.
used
Nibbling machine trump, unloading 1000 mm, copying device, cutting, nibbling, slits, gills, beading, etc.
used
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
used
Helix length at 40 kg / mm ° max. 10 mm Power 1800 Watt 470 strokes / min.
used
Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050
used
Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part
used
TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...
used
1250 x 2500mm Siemens 840D 3200w