We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Cat.-Nr. 12-1090 in a very good condition Capacity: 4000 litres/h Year of Construction: 1981 Masch-Nr. 21628 Original Price: Euro 6000,- Measurements and Weight: LxWxH: 126 x 40 x 109 cm Weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
used
Used eccentric screw pump SMI - Ruhr pumps Series: SMI Size: 150 Year of construction: 2003 Capacity: 150 m m³/h maximum
used
Eccentric screw pump Manufacturer: Seepex Series: BN Size: 17 Pressure level: 12 Operating pressure: 10 bar Operating temperature: - 10 / + 30 Flow rate: 10 m ³/h Revolutions: 260 U/min Year of constr.: 1990 in very good condition!
used
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 15-6LT Commission no.: 96373 Year of construction: 1997 Flow rate: 14 m ³/h Pressure in the pressure port: 2.00 bar Speed: 344 rpm Motor: kW 2.24 Inlet: DN 80 PN 16 DIN 2533 Pressure connection: DN 65 PN 16 DIN 2533 Material: Main body GG25 Shaft: 1.4021 Stator: NBR Buna Rotor: 1.2436
used
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 35-12 Machine number: 176490 Year of construction: 2005 Power: 2-40 m3/h Pressure: 1--8 bar Speed: 1450 RPM. Connection suction side: DN 150 Port side: DN 125 Length: 2400 mm Condition: used, ready
used
Attachment: eccentric screw pump Manufacturer: Seepex Type: BN 1-12 Machine number: 176411 Year of construction: 2005 Capacity: 150-2200 l / h Pressure: 2 bar Speed: 1400 RPM Inlet connection: DN 50 Port side: DN 50 Length: 1200 mm Condition: used, ready
used
Name: Progressing cavity pump used Manufacturer: Seepex Type: BN10 Year of construction: 1999 Material: Normal steel Drive motor: 9.2 kW operating temperature: 20°C Dimensions: L 2400 mm x W 300 mm x H 420 mm Empty weight: 250 kg. Speed: 75 -430 rpm Capacity: 1.5 -12 m3H operating pressure: 16 bar Operating voltage: 380-20 / 655-725 V Protection class: 55 Flanges: DN 80 / 100 Condition: Used Tech. Documentation: No Price: On request
used
Seepex SRF20/1/2.5 Progressive cavity pump Seepex SRF20/1/2.5 Progressive cavity pump It conveys low-viscosity to viscous media with and without solids and can therefore be used in almost all industrial sectors. From the environmental industry to the chemical industry to food production. The pumps are equipped with round flanged suction and discharge connections, as well as a large spherical inlet for easy inlet of solids media. Series: BCSB Size: 2 Pressure rating: 6L Q (m³/h) 400-2000 l/h RPM: 76-310 kW: 05 You can find more pumps - new and used - in our shop! International shipping costs on request!
used
* General * SKU234T259 * LocationBarneveld * MakeSeepex * TypeMD 003-12 * Mach.No.267899 * Main Features * MaterialStainless steel * Motor0.37 KW * Specified Features - Positive displacement pump * MaterialStainless steel * Positive displacement pumps * Pumpcheck * Number of pumps:1 * With motor0,37 kW, 230/400 Volt (1380 rpm) * With variable speed drive91 rpm * InletG 1 * OutletG 1/2 * Information * Mounted on framecheck * Total height0,6 m * Floorspace0,6x0,6 m * Weight100 kg * Extra Specifications2 stages pressure: 12 bar. Max. grain size: 1,4 mm Positive displacement pumpsSeepexPumps > Positive displacement pumpsBrand > Seepex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
used
Seepex eccentric cavity pump, BTI 17, with control cabinet with FU, built in 1994, 2-4 cbm/h, 8-24 bar, speed 70-130 rpm. , drive 9 kw., 400 V., with pre-shredder 640x360 mm inlet, incl. control cabinet in stainless steel
used
There are nine pumps available (1) Seepex BN17-12L, power: 5.5kW, year of construction: 2004 (2) 2x Seepex BN17-6L, power: 5.5kW, year of construction: 2006 (3) Netzsch NE60, power: 3.6kW, year of construction: 1978 (4) Flux F550 SF-54/26-TR with motor (5) 2x Flux F550 SF-54/26-TR, with and without motor (7) RUVAC WA501 2008 (8) RUVAC WA 2001, with kneader and cartridge separator.
used
Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg
used
Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids
used
Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg
used
Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm
used
Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange
used
Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg
used
Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition
used
Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good
used
Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg
used
Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg
used
Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg
used
No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)
used
Length approx. 4.5 m Diameter approx. 200 mm 2.2 kW drive
used
Pipe screw conveyor screw used inclined conveyors Changes can be made by our own special machine construction according to your wishes. Pipe diameter approx. 380 mm Pipe length approx. 6000 mm Inlet/outlet-diameter approx. 350 mm Screw and tube made of stainless steel Gearmotor Sew 1.1kW 10 rpm 380 V Total dimensions approx. 8000 x 600 x 1300 mm