used PANHANS thicknessing machines

Technical data (subject to change) Working width 510 mm Planing height max. 250 mm Electric table height adjustment with digital display (fine adjustment by handwheel) Table guided on 4 spindles, with 2 rollers Table length 1,040 mm 2 speeds (7 or 14 m/min) Motor power: 5.5 kW Speed 5,000 rpm Powers: 400 V, 50 Hz, 3~ Full load current 14.7 A Dimensions: 1,140 x 1,200 x 1,130 mm Weight approx. 650 kg

Width 610 mm 4 knives automatic lifting

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.5*0.8 m Weight: 600 KG

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mm Cutting height: 420 mm cutting width: 680 mm Motor output: 3 kW Table dimensions: 695 x 990 mm Table tiltable: 45 Grad Dimensions (L/W/H): 1260x840x2270 mm machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Wheel diameter: 600 mm Cutting height: 380 mm cutting width: 570 mm Motor output: 2,2 kW Table dimensions: 810 x 590 mm table height: 905 mm voltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mm Weight: 275 kg Dust suction hood: 2 x 100 mm band speed: 1550 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3,300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 7 + 14 m/min. loading dimensions L x W x H: 1070 x 1200 x 1060 mm weight: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2850 mm Number of knives: 4 (Tersa) St. Motor output: 5,5 kW loading dimensions L x W x H: 2950 x 1260 mm weight: 870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Slotted hole drilling machine with pneumatic height adjustment Duggle hole drilling on two levels in one clamping Motor power 1.5 kW With Röhm two-jaw chuck 1 - 20mm Pneumatic adjustment of the machining height by foot pedal, dowels on two levels without repositioning. Transverse adjustment approx. 240mm, infinitely variable or in 16/22/25/32mm increments Maximum height adjustment approx. 135mm Drilling stroke approx. 145mm Table size approx. 700 x 380mm pneumatic workpiece clamp Fixed stop and adjustable angle stop from +45 to -45 degrees Grid rail for quick adjustment on the side of the grid Driving equipment Extraction connection Parts repainted Pressure reducer renewed Dimensions approx. 950 x 1200 x 1300mm (LxWxH), weight 320kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse ...

PANHANS ECOPAN Working area 3200x3200 Saw with undercutter, 3 tables with air cushion Full technical documentation Cutting optimization program Opal First owner, machine in continuous operation very little used,

Trunnion carriage from Panhans with clamping device for use on table milling machines Length of base plate approx. 1000mm Sliding distance approx. 710mm Eccentric clamps for fixing the workpieces Stop can be tilted The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Key data: 45 °, 3200 mm, 1250 mm

Used sliding table saw Int. Art. Ref. m3517 Manufacturer: Panhans Type 690 Built in 1992 With scoring machine Electrical. Drive and digital display for Saw blade swivel and rip fence method Electrical. Saw blade height adjustment Digital display on longitudinal stop Carriage length 3.20 m Weight approx. 1,000 kg With wiring diagram With mitre cutting angle Neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excl ...

Gebr. Safety milling fence for bench milling machines Manufacturer presumably PANHANS with handwheel adjustment Digital displays via counter incl. pictured stop jaws Suction connection: 120 mm Distance between the two fastening screws: approx. 330 mm ex location

Carriage length 3200 mm Motor power 5.5 kW Bmawcrk3xgg Scoring machine, motor power 0.75 kW You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 38.2.2

The Panhans 1*3 edging saw or panel saw (nameplate unclear) is a compact circular saw with a panel sliding carriage and angle stop for sawing wood and similar materials., engine: 5,5 kW, cutting length: about 2,200 mm, Sliding carriage length: 2.600 mm, cutting width: approx. 730 mm, cutting height: about 100 mm, speeds: 5,700 / 4,100 / 3,200 rpm

Table dimensions: 2500 x 800 mm Motor output: 11 kW Spindle diameter: , mm reus: 3000/4500/6000/9000 U/min Weight: 1100 kg Panhans Type 240 with 2-axis control ------------------------------------------------ with swiveling milling spindle, double-sided Swivel unit bearing with 2 strong Segment guides, stand in modern Steel construction, table thick-walled, high- ribbed cast design, replaceable Milling arbor, three-phase motor for 4 speeds, Electric height and swivel adjustment in rapid and slow speed and electronic Digital display, increment measurement switching for height adjustment, milling stop included Fine adjustment and metal stop jaws and replaceable aluminum splitter tongues, Suction nozzle at the milling stop and below of the table 120 mm D, minimum suction speed at the suction nozzle 20 m/s, rotating table insert, short milling arbor 30 mm D, locked reversible switch for left ...

dowel hole drill device: division 16, 22 25, 32; max depth of the slot: 145 mm; max length of the slot: 240 mm; height adjustment: 135 mm; motor power: 1,5kW; speed: 2800 U/min; suction connection: 100 mm; machine length: 1280 mm; machine width: 960 mm; weight: 200 kg;

Tenoning spindle: , 0 Number of milling agregates: , St. Spindle diameter: , mm Number of machnines: 15 Stk Company closure for wooden window construction -------------------------------------- Machines will be available from August/September 2024. Pos. 1: Weinig, PFA 17N, built in 1967 Four-sided planer, 6 spindles, chain drive, with glazing bead separation, with planing heads Continuous feed, working width 170 mm, working height 120 mm Electric height adjustment feed beam Pos. 2: MAPO Spu 180, built in 1992, finishing machine, mobile Pos. 3: Gubisch CW 2, built in 1998, angle system with return, with Leitz IV 68 wood, wood-aluminum, Gold IV 78 wood 1 slot spindle, 3 profile spindles Pos. 4: Götzinger OBM, built in 1998 corner bearing and olive drilling machine, 1 drill head Olive, 1 x drill head corner bearing Roto NT with le ...

Rolls Ø: 600 mm, max. cutting height: 400 mm, max. cutting width: 580 mm, max. strap length: 4,735 mm, Table size: 810 x 590 mm, Table height: 920 mm, Table tilt: 45°, Motor 400 V: 3.0 hp / 2.2 kW, Suction nozzle Ø: 2 x 100 mm, Cutting speed: 1,550 m/min., Dimensions (LxWxH): 1,130 x 640 x 2,120 mm, Weight: 275 kg

Description: Machine number: 7457 Operating voltage: 400 V Frequency: 50 Hz Rated current: 9.1 A Saw blade speed: 1700 mm/min Max. Cutting height: 440 mm Max. Cutting width: 780 mm Max. Saw blade length: 5775 x 5680 mm Blade thickness: 0.7 - 0.8 mm Max. Blade width: 30 mm Table size: 1135 x 760 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,100 x 2,400 mm, weight approx.: 600 kg