We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures
used
Just arrived: Baler Presona LP 80 VH1, year 2006 More images and a feature video will be available in early 2024. Specifications: Manufacturer: Presona Sweden Type LP 80 VH1 Year of construction 2006 Press force 78 t Drive power 55 kW Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight approx. 450-600 kg Throughput at bulk density of 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW: 20-27 t/h Binding 5-fold vertical Weight approx. 25000 kg
used
automatic baler Manufacturer: PRESONA Type: LP 50 EH 2 Year of construction: 2005 specifications: Press force: 50 t Specific pressing force: 6.31 kg/cm² Drive power: 37 kW Throughput: 340 m³/h Infill opening: 1,250 x 1,100 mm Channel format: 720 x 1,100 mm (H x W) Bale weights: up to approx. 400-550 kg Setting: 5-fold vertical Oil tank: approx. 600 ltr. capacity Bale weight : up to 550 kg depending on material and length Machine dimensions: approx. 8,200 x 2,800 x 3,900 mm (L x W x H) Machine weight: approx. 18 t
used
automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.
used
Baler Presona LP 50 EH2, built in 2005, baling force 50 t Specifications: Manufacturer: Presona Sweden Type LP 50 EH2 Year of construction 2005 Press force 50 t Drive 37 kW Throughput rates at bulk density of 50 kg/m³: 11-13 t/h 100 kg/m³: up to 25 t/h Filling opening: 1250 x 1100 mm Bale size 1100 x 720 mm Bale weight: 400-550 kg Bonding 5-fold Transport dimensions approx. 8100 x 2120 x 2680 mm (LxWxH) Weight approx. 15 t The press is currently still in operation and can be viewed on request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.
used
Specifications Maximum pressure: 78 tons Pressing force: 95 tons/m² Duct cross-section: 750 x 1100 mm Bale weight: 450-600 kg Power supply: 400 V/ 55 kW Year of construction: 2001 Number of ties: 5-fold vertical, Dimensions of the tailgate: 1500 x 1100 mm Weight: approx. 24 tones
used
Pressing force: 785kN, opening width: 1100mm, bale weight: 475-750kg, bale dimensions: 1100x750mm, max. output: 30t/h, motor power: 45kW, operational hours counter: 59,550h, with documentation, an on-site inspection is possible, the machine is located in Slovakia.
used
Technical data baler: Manufacturer Presona Type LP 40 EH1 PET Year of construction 1998 Operating hours 37,884 hours, data according to operating hours counter, as of March No. of bales pressed 311,714 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 15 kW Connected load, total 18 kW Absicherung min. 50 A, max. 63 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective t ...
used
Technical data baler: Manufacturer Presona Type LP 40 EH1 Year of construction 1995 Operating hours 16,917 hours, data according to operating hours counter, as of March No. of bales pressed 28,745 pieces, data according to bale counter as of March Pressing force of main press 40 tonnes Specific pressing force 5.2 kg/cm² Dimensions of feed chute 1,250 x 1,100 mm Filling volume 2.2 cm³ Theoretical throughput 290 m³/hour Throughput capacity under operating conditions 160 m³/hour Bale dimensions 720 x 1100 mm, variable length Drive power 18,5 kW Connected load, total 26 kW Absicherung min. 62 A, max. 100 A 5-fold vertical binding, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3 to 4 tonnes/hour bulk density of 50 kg/cbm approx. 5 to 6 tonnes/hour bulk weight of 100 kg/cbm approx. 7 to 10 tonnes/hour Filling volume of hydraulic oil tank 600 litres Effective tra ...
used
automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t
used
used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, - ...
Mfc.: RIETER Year of production: 1985 Press power max.: 12 ton Type: Horizontal constr. A5/1 Bales size: 600 x 800 x 1200 mm Bales weight: 90-125 kg Feeding silo Semi-automatic binding Hydraulic unit Motor power: 4 kW
used
Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor
used
1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material
used
Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use
used
baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg
used
automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...
used
Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2010 Serial No.: 111137 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2009 Serial No.: 109145 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113654 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113652 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109139 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)