We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears -Blade insert length: 200 mm -Steel sheet: up to 7 mm -Flat/band iron: up to 100x9 mm -Round steel: up to 20 mm -Rectangular profile: up to . 18x18mm -Lever arm: with rack and pinion translation -Total dimensions: 540/180/H1570 mm -Transport dimension: 1250/180/H490 mm -Weight: 44kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears -Blade insert length: 200 mm -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm -Lever arm: with rack and pinion translation -Total dimensions: 455/170/H1540 mm -Transport dimension: 1230/170/H440 mm -Weight: 49 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears -Blade insert length: 150 mm -Round steel: up to 12 mm -Lever arm: with locking spring -hold-down: -Total dimensions: 320/120/H1260 mm -Transport dimension: 990/120/H310 mm -Weight: 12 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears type 3 S / 4 L -Blade insert length: approx.300 mm -Steel sheet: up to 4 mm -Flat/band iron: up to 70x6 mm -Round steel: up to 13 mm -Cutting capacity: see photo nameplate -Hold-down device: continuously adjustable -Number: 2x lever scissors available -Price per piece -Total dimensions: 500/160/H1480 mm / 500/160/H1180 mm -Transport dimension: 1180/160/H430 mm -Weight: 32/30 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears type 3/5 R -Blade insert length: 200 mm -Steel sheet: up to 5 mm -Flat/band iron: up to 60x6 mm -Round steel: up to 13 mm -Cutting capacity: see photo nameplate -Total dimensions: 380/160/H1310 mm -Transport dimension: 970/160/H470 mm -Weight: 23 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears type 3S / 6 R -Blade insert length: 200 mm -Steel sheet: up to 6 mm -Flat/band iron: up to 70x7 mm -Round steel: up to 13 mm -Cutting capacity: see photo nameplate -hold-down: -Total dimensions: 385/160/H1500 mm -Transport dimension: 1160/160/H400 mm -Weight: 24 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears type 3/5 R -Blade insert length: 200 mm -Steel sheet: up to 8 mm -hold-down: -Total dimensions: 385/160/H1280 mm -Transport dimension: 960/160/H390 mm -Weight: 22 kg
used
Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears -Blade insert length: 280 mm -Round steel: up to 14 mm -Total dimensions: 500/160/H1250 mm -Transport dimension: 930/160/H420 mm -Weight: 30 kg
used
Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg
used
Long knife, sheet metal and round steel shears -Sheet metal shears: stable -Material: flat steel -Round: up to 15 mm -Square: up to 15 mm
used
Description: control: conventional sheet thickness: 6 mm blade length: 300 mm cutting width for round material: 13 mm cutting width for square material: 70 x 6 mm Approx. Onsite Dimension. (l x w x h): 500 x 160 x 1,160 mm, weight approx.: 30 kg
used
sheet width - max.: 80 x 12 mm plate thickness: 8,0 mm weight of the machine ca.: 135 Kg dimensions of the machine ca.: 1,20 x 0,50 x 1,75 m - Serial-no.: 305-11.06 - fixed on rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price
used
Max punching force: 1100 kN Extension: 510 mm Large support table with material flaps on the punchside Electric contact load stop for heare hydraulic holder for profile and flat steel shears with a wide range of tools ; Very good
used
Motor flat bar shears / bar shears make MUBEA type KFS 20Machine -No: 161/23028/420for rectangular cutting of round, square and flat steelMax. Shear cross section: 4000 mmCutting performance flat: 100 x 36 mmor: 300 x 20 mmwith special tool round: 65 mm: square: 60 x 60 mmStroke rate: 40 hpM.Power requirement: 7.5 hpWeight approx: 2450 kgOutside dimensions approx: 1600 x 1200 x 2700 mmWith- Central lubrication- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg
used
Specifications: Weight approx. 3 to Drive power 8.5 kW Height approx. 2.1 m Width x depth approx. 2 x 0.8 m Perforated punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Flat steel shears : 500 x 18 mm Notching device with rectangular tool up to 13 mm Sectional steel shears, L-steel, 90° mm
used
Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø up to 10 mm -Projection: 60 mm -without: tools -Dimensions: 200/130/H1180 mm -Weight: 12 kg
used
Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch -Stamp: Ø up to 10 mm -Projection: 60 mm -without: tools -Dimensions: 200/130/H1180 mm -Weight: 12 kg
used
Max punching force: 750 kN stroke over foot switch With range of tools as desired
used
Combined cut-out machine and sheet metal scissors with base ; Very good
used
The mubea and Peddinghaus tools pictured are not sold completely. You can tell us what stamps and dies you need, so that we put together an individual assortment for you.
used
5-way combined iron worker with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: 0171793397130 built in 1993Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel scissors L-steel 90 °: 140 x 13 mmL-steel 45 °: 70 x 7 mmSteel bar scissors round / square: 45/42 mmNotching device: 10 mmHole punch punching force: 55 tProjection: 510 mmpunches: 30 in 16 mmStroke of the punch stepless: 0 - 60 mmNumber of strokes of the punch with 20 mm travel: 42 strokes / minDrive power: 5.5 kWWeight about 1500 kgWith- support tables- various accessoriesused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
5-fold combined profile steel shears with notching device and hole punchMake MUBEA type HIW 550/510Machine -No: HIW550/510/94 built in 1999Technical specifications:Flat steel scissors: 350 x 13 mmAngle steel shears L-steel 90°: 140 x 13 mmL-steel 45°: 70 x 7 mmSteel bar shears round/ square: 45 / 42 mmNotch: 10 mmPunching force: 55 tProjection: 510 mmpunches: 30 in 16 mmInfinitely variable punch stroke: 0 - 60 mmNumber of strokes of the punch at 20 mm path: 42 strokes / minDrive power: 5.5 kWWeight approx.: 1600 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools