used MATSUURA horizontal numerically controlled machining centres

Table size 300 x 300 mm Longitudinal travel 450 mm Cross travel 400 mm Vertical travel 400 mm Max. load on table 200 Kg Spindle speeds 50 - 15.000 rpm Tool change 60 pcs Spindle taper ISA 40 Control FANUC18 i - M Timer, machine on 82.300 Timer Cycle hours 17.200 Timer Main motor power 7,5 Kw Equipped with: Pallets 5 PCS. Internal cooling Hand wheel for axes travel Short arbors Interface RS-232 C Turn table Chip conveyor Coolant Service tools etc.

Key data: 660 , 660 , 660

CNC controller: SIEMENS 840Di Axes X-axis travel mm: 660 Y-axis travel mm: 660 Z-axis travel mm: 660 B-axis degrees: 360º (0,001º) Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø700x850 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 40 - 12.000 Cooling Cooling through the Spindle Center bar: 70 Tank capacity: 1.400 Tool system Tool holder: SK-40 Big+ Tool magazine slots: 360 Max. Tool Diameter With free neighboring places mm: ø150 With occupied neighboring places mm: ø80 Max. Tool Length mm: 350 Max tool weight kg: 10 Equipment Electronic Handwheel Chip conveyor Infrared probe (RENISHAW OMP60) Rotating inspection windows Rinsing gun blowing air through spindle center Signal lamp High pressure pump Tool breakag ...

Machining center 5-axis Manafacture: Matsuura Type: MAM 72-25 V Year of construction: 2007 CNC control: Fanuc G-Tech 30i Travel: X/Y/Z: 550 x 410 x 450 mm Table size: Ø 130 mm Pallet changer: 10-fold Tool magazine: 60-fold Knoll high-pressure system Internal cooling 70 bar

Processing Manafacture: Matsuura Type: H Plus 405 PC6 Year of construction: 2003 CNC control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120-fold 4. Axis Knoll high-pressure system Internal cooling 70 bar

Key data: 1020 mm, 550 mm, 410 mm

Matsuura MC 1000 VG, Built in 2000, Control Yaskawa J 300, Dokyjh Travel X/Y/Z 1020/550/410 mm, Tool changer 30 times, Spindle speed up to 20,000 rpm, 3D edge probe,

Matsuura Horizontal Machining Center CNC control Matsuura G-tech 16i Pallet table size 500x500 mm Number of pallets: 6 Table load 400 kg Spindle speed 15000 rpm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Longitudinal X: 550 mm Cross Y: 440 mm Vertical Z: 580 mm Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 16 i Large package tooling ca 100 pieces Large package pallets Large package clamping equipment Knoll filtration system Renishaw laser measuring X - Travel:               550mm Y - Travel:               440mm Z - Travel:               580mm A - Axis:                 360.000° B - Axis:                 + 65 to - 125° Table load:               60 Table  Ø:                 350mm Feed rate X-Axis:         60000mm/min. Feed rate Y-Axis:   ...

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc G-TECH 16İ X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

Matsuura H.Plus-405 CNC Horizontal Machining Center CNC: Fanuc G-TECH 30İ X axis: 600 mm Y axis: 600 mm Z a:xis: 600 mm 4 axis 1° index Pallet size: 500 x 500 mm KNOLL high pressure unit

Horizontal CNC machining center make MATSUURA type MC 600 H - 45Masch. -No: 870706216 Year of construction 1987Table work area: 450 x 450 mmTable longitudinal path X: 600 mmvertical travel of the headstock Y: 450 mmStander traversing Z: 480 mmTable index increment: 0.001 mmMax. Table load: 500 kgNumber of tools in the changer: 50Distance table spindle axis: 85 - 525 mmCenter of table spindle: 125 - 605 mmSpindle diameter: 80 mmSpindle mount: BT 40Spindle speed: 30 - 6000 rpm.Rapid traverse XYZ: 15000/15000/15000 mm / min.Feed rate stepless: 1 - 5000 mm / min.Drive power: AC 7.5 / 11 kWWeight: 8200 kgWith- CNC control Fanuc 11 M- Number of change tables 2- a lot of tool holders- 14461 operating hours- Chip conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Err ...

Description, subject to prior sale. CNC 4-axis horizontal machining center Control: Fanuc i18-M X 450 mm Y 400 mm Z 400 mm Spindle revolution 15000 rpm 61 ATC 5 pallets 300 x 300 mm SK 40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling The machine is in good working condition and can be inspected working under power. Availability short-term Technical specifications, subject to error.

Description, subject to prior sale CNC 4-axis horizontal machining center Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling Spindle hours 11000 November 2020 - tool spindle renewed January 2021 - hydraulic aggregate renewed February 2021 - ATC retrofitted August 2021 - engine/motor pallet station renewed December 2022 - tool breakage monitoring renewed October 2023 - spindle oil cooler renewed Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

Description, subject to prior sale. CNC Horizontal 4-axis machining center - Y 560 mm Control: Matsuura Gtech 30i (programmable FANUC/Matsuura) X 500 mm Y 560 mm !!! Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in April 2023. Telescopic cover renewed in September 2023 Machine is in very good working condition. It can be inspected working under power. Technical indications, subject to error.

Description: serial number: 980212965 control: YASNAC J300M working hours: approx. 1788 hrs.  , travels: X-axis: 500 mm Y-axis: 470 mm Z-axis: 450 mm rapid traverse: X-axis: 24 m/min. Y-axis: 24 m/min. Z-axis: 24 m/min  , spindle speed range: 15000 rpm spindle ,power: 15 kW  , number of pallets: 11 pallet size: 300 x 300 mm  , toolholder: BT40 toolchanger positions: 180  , please also have a look at the videos and the PDF documents of this machine z-motion: 450 mm, x-motion: 500 mm, y-motion: 470 mm, control: YASNAC J300M, pallet table size: 300 x 300 mm, numbers of pallets: 11, taper: BT40, power capacity - spindle: 15 kW, toolchanger positions: 180, turning speed range: 15,000 rpm, rapid motion: 24 m/min, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 5,300 x 4,400 x 2,700 mm

Description: machine number 17211 z-motion: 600 mm, x-motion: 600 mm, y-motion: 600 mm, control: MATSUURA G-TECH 30I, numbers of pallets: 2, taper: JIS B 6339, toolchanger positions: 51, turning speed range: 40 bis 12000 rpm, feed range: 1 bis 50000 mm/min, rapid motion: 50 m/min, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 3,500 x 3,000 mm

Description, subject to prior sale. CNC 4-axis horizontal machining center Make: Matsuura Type: H.Plus-300/PC-5 Y.o.m.: 2003 Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Number of pallets 5 SK40 IKZ 25-50 bar Measuring Probe Tool breakage monitoring KSS Cooling New spindle in 7/2022. Spindle hours 4800 April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, s ...

Matsuura MX-520 5 axis machining center 20.000 rpm Machine is in excellent condition X : 630 mm Y : 560 mm Z : 510 mm

Cutting hours : 1200 saat Spindle speed : 20.000 rpm Control unit : Fanuc

X: 550 Y : 410 Z : 560 15000 rpm Machine is in good condition

Vertical Machining center Manufacturer Matsuura Model RA-2F Year 1998

Technical details on demand.

Table length: 760 mm Table width: 380 mm Longitudinal X: 510 mm Cross Y: 360 mm Vertical Z: 460 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Yasnac CNC Model: J 300 SPECIFICATIONS X - Travel  510 mm Y - Travel   360 mm Z - Travel  460 mm Controll  Yasnac J 300 Table Length x Width  760 x 380 mm Table load in kG  400 Kg Spindle Taper  Bt 40 Spindle speeds / ranges  15.000 Rpm ATC tool changer  20 Number off controlled axis  3  

Table length: 480 mm Table width: 400 mm Longitudinal X: 550 mm Cross Y: 450 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac CNC Model: MX 3 SPECIFICATIONS X - Travel 550 mm Y - Travel  450 mm Z - Travel   500 mm bed / plano / portal / moving column  VMC Controll  YASNAC MX3 Table Length x Width  480 x 400 mm Spindle Taper Sk 40 Spindle speeds / ranges  8000 Rpm ATC tool changer 30 Number off controlled axis 3 DIMENSIONS Length  2500 mm Width  2200 mm Height  2600 mm  

Table length: 540 mm Table width: 320 mm Longitudinal X: 330 mm Cross Y: 300 mm Vertical Z: 250 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Yasnac X - Travel:     330mm Y - Travel:     300mm Z - Travel:     250mm Table Length:   540mm Table Width:    320mm Table load:     100 Feed rate X-Axis:90000mm/min. Feed rate Y-Axis:90000mm/min. Feed rate Z-Axis:90000mm/min. Spindle Taper:  30ISO/Bt/Mk Power on spindle:7.5kW Speeds / ranges:40000Rpm ATC / revolver: 30 Chip conveyor:  Yes Length:         2800mm Width:          2600mm Height:         28000mm