We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Makino A55e Horizontal Machining Center ::SPECIFICATIONS::: CNC Model: Makino CNC version: Professional 3 (Fanuc 16iM) Tool connection: HSK 63 Spindle power: 20Kw Number of spindle revolutions: 14000 Number of tools: 133 X Axis Stroke: 560mm Y-axis stroke: 560mm Z Axis Stroke: 600mm Rapid feeds linear axes X Y Z: 90m/min Guides: roller Pallet size: 400x400mm Pallet type: indexed Maximum load allowed: 500Kg High cooling pressure: yes Pressure value: 70bar System with external tank with filter: yes Chip evacuator: carpet Machine equipment: Marposs probe :::D IMENSIONS AND WEIGHT::: Length: 4800mm Width: 2200mm Height: 3000mm Weight: 9000Kg
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series 31i Technical data Table length: 750 mm Table width: 450 mm Table load max.: 300 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 350 mm Dimension of the workpice: Length: 750 mm Width: 635 mm Height: 250 mm Tool magazine number of tools: 60 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Time of tool changing: 4.8 sec Spindle nose: HSK: E50 Distance spindle nose to table: 150 - 500 mm Spindle speeds: stepless from: 300 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Air connect: 4 - 8 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 17/13 kW Total power required: 50 kVA Machine´s weight about: 7700 kg Overall ...
used
This Makino V55 Vertical Machining center was manufactured in the year 2001. It is equipped with a Fanuc Professional 3 control unit. The machine has a spindle speed of 20000 rpm.
used
This Makino F5 Vertical Machining center was manufactured in the year 2013 in Singapore. It is equipped with a Fanuc Series FS31i control unit. The machine has a spindle speed of 200-20000 rpm.
used
This Makino D500 horizontal machine center was made in the year 2016 in Germany and has 20000 spindle hours. It is equipped with a Makino professional 5 control unit and has 5 axis. The machine has a spindle speed of 14000 rpm. 2 units are available.
used
This Makino V33i Graphite Vertical Machining Center was made in the year 2014 in Germany. It is equipped with a Professional 6 control unit and has 3 axis. The machine has a spindle speed of 20000 rpm.
used
This MAKINO a120nx Horizontal Machining center was manufactured in the year 2017. It is equipped with a Makino CNC Professional 6 control unit and has 3 axis. The machine has a spindle speed of 20-8000 rpm.
used
Makino U 86 Wire ereroding machine, Built in 2001, Multipulse control, Travel X/Y/Z 800/600/500 mm, max table load 3,000 kg, Bath size X/Y/Z 1220/910/500 mm, Clamping surface table 1220 x 910mm,
used
x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
X : 1800 mm Y : 1000 mm Z : 800 mm Number of working hours : 2000 Tool measuring probe Chip conveyor
used
X : 550 mm Y : 550 mm Z : 550 mm Fanuc control unit Table size : 400 mm x 400 mm Machine is in working condition
used
Makino V55 Vertical Machining Center Double table X : 900 mm Y : 600 mm Z : 600 mm 22 000 rpm Machine can be seen in working condition
used
CNC - Control Makino Travel x/y/z 370 mm / 270 mm / 220 mm workpiece dimensions L/W/H 790 mm / 670 mm / 220 mm Wire diameter range 0.1 mm – 0.25 mm workpiece weight 600 kg cone at 100 mm height +/- 15° Mitsubishi - Axle Drives
used
Machining center horizontal MAKINO MAG 1 Manufacturer: Makino YEAR: 2015 Control Fanuc Clamping table surface ... 800x800mm Axis X ... 1520mm Axis Y ... 1100mm Axis Z ... 1350mm Spindle speed... 500-33000 rpm. controlled axes ... 5 cooling HSK - F80 workpiece height ... 1500mm workpiece weight ... 1300kg workpiece diameter ... 1500mm Axis A ... 110° Axis B ... 360° The machine is in good condition, possible to test under power.
used
CNC Tool grinder Makino Seki Mod.CNJ5u-H Year: 2009 Excellent condition, occasionally used by Samsung Electronics.
used
5-axis horizontal machining center Makino MCD 2016 Year of construction 2005 Fanuc 16MC + Pro 3 Controller 2-fold pallets 1,300 x 1,300 mm Pallet load per pallet max. 12,000 kg ! 4e axis B-axis 360° / 0.001° 5e axis 25° spindle holder, C-axis + /- 185° X 2,000 mm Y 1,600 mm Z 1,500 mm Spindle drive power 50 kW Spindle speeds up to 15,000 rpm. Tool holder BT50 Big Plus 99-fold automatic tool changer ATC Renishaw Touch Probe Scales on X, Y, Z, B axes Conveyor IKZ 28 bar Great condition To be visited under power Offer number MH-6265
used
x-travel: 900 mm y-travel: 500 mm z-travel: 450 mm table-size: 1.000 x 500 mm Control: FANUC PROFESSIONAL 5 spindle taper: BT - 40 rapid taverse: 20.000 mm workpiece: 1,000 x 500 x 450 mm table weight: 1.000 Kg workpiece dia.: 120 mm max. tool weight: 8 kg Tools changer: RANDOM 30 pos. Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)
used
For sale Makino 5-axis SImultan machining center type D500, equipped with a Fanuc 310iS (Profesional 5) controller including Makino robot system. Very nice 5-axis simultaneous machining center type D500. X-axis movement: 550 mm Y-axis movement: 1000 mm Z-axis movement 500 mm A-axis: 150 degrees (+30 degrees to -120 degrees) C-axis: 360 degrees continuous Complete with Makino robot system. It is a Fanuc 6-axis robot type R2000iB/165F including rack magazine Makino VIP with 45 positions
used
X : 650 mm Y : 550 mm Z : 450 mm 20.000 rpm 1500 liters double head compressor Tool cabinet and hool holders come with machine
used
Makino S33 High Speed Machining Center Control Unit : Fanuc PRO 5 X: 650 mm Y:500 mm Z: 400 mm Spindle speed : 20.000 rpm Rapid: 40.000mm/min Cutting: 40.000mm/min Prob Tool holders are included Machine is in good condition
used
Makino SP43 EDM Wire Cutting Machine Machine is in very good condition Double generator X : 450 mm Y : 300 mm Z : 320 mm
used
x-travel: 730 mm y-travel: 730 mm z-travel: 800 mm Control: Professional 6 : 60 St. total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.