used LÖSER band grinding machines

Centerless circular and polishing grinding machine make LÖSER type RPS 374Year of construction 1990Technical specifications:Grinding range: 6 - 80 mmBelt dimensions: 2500 x 150 mmFeed speed: 0 - 10 m / min.Max workpiece weightDiameter range up to 80 mm approx.: 10 - 15 kgNumber of grinding stations: 2Drive power per grinding station: 5.5 kWWith- Supply and discharge- cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine with cylindrical grinder type BC for cylindrical, conical and slightly oval tubes or solid material up to 3 m in length. Diameter: 3 - 60 mm Feed rate 0 - 20 m/min. infinitely variable The machine has been repainted, defective components have been renewed or repaired. The machine is in very good condition and can be used immediately. An instruction manual is provided.

2-station polishing station make LÖSER type FS 384 G2Machine -No: 268 built in 1989Technical specifications:Number of polishing stations:2Polishing disc diameter approx. :240 mmTable length: 2750 mmTable width: 150 mmPassage height: 150 mmPassage height: 100 mmAbrasive belt width: 2500 x 150 mmConveyor belt feed: 2.5 + 5.0 m/min.Conveyor belt: 3000 x 150 mmConnected load: 380 V, 50 Hz:Drive power: 5.5 kWWith- Polishing stations with liquid paste gunsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wet three-roller belt grinding machine make LÖSER type KS 355Machine -No: 503Technical specifications:Abrasive belt length: 3500 mmMax. contact roller width: 120 mmContact washers: 200 x 80 mmNumber of contact rollers:3Power connection: 380 V / 50 HzDrive power: 2.2 kWWith- Wet grinding device- Sanding belt with one sanding position- pneumatic belt tensionusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.

Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Make -No: 1520Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Machine -No: 4559 built in 1984Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam.: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWWith- mot. Turning and feed drive- Feed and transport rollersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Contact grinding machine / contact belt grinding machine make LÖSER type KS 350Machine -No: 6258 built in 1992Technical specifications:Abrasive belt length: 3500 mmAbrasive belt width: 5 - 75 mmDrive pulley diameter: 180 mmBelt speed: 13.5 + 27 m/minTube diameter: 3 - 180 mmFeed speed: 0 - 25 m/minDrive power: 3.2 / 4 kWWith- Additional device BC 350- roller transport unit on both sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Profile grinding machine Loeser S0 for grinding profiles using templates. The sanding belt is guided over the wheel/template profile and thus transfers the shape to the wood, which is then passed through manually the machine is guided. · Workpiece size LxWxH max. approx.: 500 x 300 x 100 mm · Extensive accessories, motors approx.: 2 kW

Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm

Planer for round bars solver with magazine Type: VF 120 Year of construction: 1987 max. workpiece thickness 120 mm with 2 planer heads and 2 knives each (4 knives in total) in the machine and 2 spare planer heads and 2 knives each (4 knives in total) for round bars in 8 mm Feed speed 5-25 m/min. incl. slide-in magazine solver suitable for the production of dowel rods, round and profile rods

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Vertical band saw PEHAKA - Petzing & Hartmann Kassel Type SLA 8 Masch. No. 39150 Year of construction 1995 Projection in width 780 mm Table size (work table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm Projection in height max 475 mm Table load max. 500 kg Roll diameter 800 mm Band saw blade dimension 6300 x 32 x 1.2 mm Belt speed 1400 m/min. Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Working table with 13 T-slots for clamping - hydraulic table movement 500 mm - infinitely adjustable feed speed via throttle valve 0-3000 mm /min. - 2x suction nozzle in the machine stand- hydraulic power pack permanently installed at the bottom of the machine stand - operating instructions, electrical plan, hydraulic plan available Space requirement L x W x H 2200 x 1500 x 2820 mm Weight 2000 Kg very good condition; used

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Factory new with dust extraction automatic belt centering Tool-less change of the sanding belt Sanding belt 60 grit 2000 x 75 mm Band width 150 mm Plan grinding range 500 mm Belt speed 15 / 30 m / s Weight 120 kg Motor pole change-over bar 2.2 / 3,75 kW Suction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Lieferumpfang: incl. belt 60 grit Connection cable with CEE plug 16 A Dust bag 1 year warranty including packaging and transport in Germany

MBSM 75-200-2 Metal band grinding machine Quick clamping system Grinding width 75 mm Speed: 14.5 and 29 m/s Belt: 75 x 2000 mm Engine: 400 V 50 Hz 1.5 / 2.2 kW Suction nozzle diameter 100 mm Weight 72 kg G & pieces 3922075

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

avec moteur d´aspiration

-Emassing 2m long; 1.3m wide; 1.1m high -400V; 50Hz; 10kVA; 35A -11.5KW Qvcdc9vbp -Pneumatics 6bar -grinding belt 300mm wide; 4088mm long; -Speed 15-30 m/s -ca 77 dbA -Wet grinding direction 0.24kW; 90l/min -Fuell quantity 115liter -Weight 250kg

Contact belt grinding machine - Width: 100cm - Depth: 50cm - Height: 200cm - 1 kW - 1400 rpm Good condition fully functional can be visited and tried out on site. Shipping abroad. Bjb9nyul9y Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Band width: 0 mm Motor power: 0 HP/kW CNC Brand: 0 CNC Model: 0

Band width: 0 mm Motor power: 0 HP/kW CNC Brand: 0 CNC Model: 0 Technical data Band length: 500 mm Band width: 50 mm