used KOMPTECH shredders

Stationary universal shredder Komptech Crambo 3400, built in 2011, including hopper and elevation Manufacturer: Komptech Type: Crambo 3400 Year of construction: 2011 Hours: 3912 Propulsion: 160 kW Roller speed: max. 32 min-1 Roll length: 2820 mm Roller diameter: 610 mm Throughput: up to 45 t/h Strainer: 12.5 cm Dimensions: 5772 x 2949 x 3191 mm Weight: 19000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet

ID2434 Komptech Crambo 5000 Hook year/Year of construction 2007 approx. 6100 hours/hours Shredder Crambo 5000 hook, dispenser without axes, twin-shaft shredder as slow-speed Shredder Crambo 5000 hooks, dispenser without axles, twin-shaft shredder as low-speed

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

Komptech type: terminator 5000 SE XF Shredder control:-year of production: 2009 Dimensions and weights Machine weight kg: 16,800-other Year 2009 drive performance hydraulic (kW) 1 x 200 CRUSHING unit cylinder length (mm) 3000 hydraulic roller diameter (mm) 1050 max speed (min-1) 29 maximum THROUGHPUT hydraulic, depend on material (t/h) 80 5,800 hours of operation

Complete screening plant with oversize recirculation, with magnetic separator with stockpile conveyor belt Top condition Original price at that time € 165,000 net Available from February 2023

Builder: KOMPTECH Model: PRIMUS Engine: PERKINS Power Engine: 38 kW (51 HP) Year: 2015 Working Hours: 2.650 h Hourly Production: 70 m³/h Screening System: TROMMEL L 4.000 mm X D 1.450 mm Weight: 8.000 kg

Komptech mobile drum screening machine Cribus 3800, year of manufacture 2014 Manafacture: Komptech Type: Cribus 3800 Year of construction: 2014 Connected load: 30 kW Diesel generator: 48 kVA Screening drum length: 6000 mm Screening drum diameter: 2200 mm Revolutions per minute: 20 Throughput: up to 220 cbm/h (depending on material) Transport dimensions: 12000 x 2550 x 4000 mm Weight: 18000 kg Material feed Bunker volume: 5 cbm Feed length: 4000 mm Feed width: 1675 mm Feed height: 2950 mm Material discharge Discharge height coarse fraction (30°): 3500 mm Discharge height fine fraction (30°): 3350 mm Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appoin ...

Komptech mobile drum screening machine MAXX, built in 2012, with additional equipment Manafacture: Komptech Type: MAXX Year of construction: 2012 Diesel engine drive: 62.5 kW Screening drum length: 4500 mm Screening drum diameter: 1800 mm Effective screening area: 22.5 m² Sieve hole: 25 mm Throughput: up to 120 cbm/h (depending on material) Transport dimensions: 11250 x 2550 x 4000 mm Weight: 16000 kg Material feed Bunker volume: 5 cbm Feed length: 4000 mm Feed width: 1675 mm Feed height: 2800 mm Material discharge Discharge height coarse fraction: 2550 mm Discharge height fine fraction: 2150 mm Accessories: Magnetic drum Central lubrication Air classifier Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sal ...

Builder: KOMPTECH Model: TOPTURN X67 Year: 2011 Operative Hours: 2.700 h Country: ITALY

Hopper opening: 3,000 x 2,000 mm rotors: 2 Pcs. Rotor flight circle: each Ø 590 mm cutting tools: 13 pieces cutting plates 120 x 120 mm on tool holders bearing: pedestal drive: 2 x 90 kW machine weight: approx. 24,000 kg facilities: incl. hydraulic screen door latch / interfering substance removal

Ready exhibition machine built in 2016 Mercodor ZM 44 Cutting Chamber 500 x 380 mm knife 14 3 mm hook drive 7,5 kw

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Used Shredder for sale information on request! Spare shafts, renovations, repairs,

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Einwellenschredder used in the tire recycling as a rubber mill. 2 motors with each 200 kW. Performance 4 t / h truck tyres.

Polystyrene shredders for EPS waste and other materials made of polystyrene – EPS specifications: Electric motor: 5.5 Kw/380 V Speed: 120 rpm. Weight: approx. 1800 kg Dimensions: 2030x1100x1550 mm Throughput: up to approx. 25 m³/hour * Insertion opening: 1500×600 mm Granule size: up to approx. 50 mm *Throughput depends on the material and size of the sieve. PLANTS and SYSTEMS for SHREDDING EPS WASTE (no longer usable polystyrene expands, polystyrene) – STYRO-CUT® EPS is a hard plastic material. It is mass-reduced and has good mechanical properties. In the EPS block of 1 m³ volume, there is about 98% air in 3-6 million closed cells, which is why EPS works as a remarkable heat insulator. The plant was developed for the processing of smaller quantities of polystyrene, as well as systems for the mass processing of EPS waste. Such granules can be used: in ...

Crushers

- Drum Shredder/Shredder Pallmann - with inlet funnel - Serial number 0806.2006.0017

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

the two shaft shredder with knives 14 mm 3 hooks and 7.5 kw