We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock
used
Cycle-controlled lathe GILDEMEISTER NEF 520 With control MANUAL PLUS 4110 Year of construction: 2005 Spindle bore: 70 mm Center width: 1000 mm Circulation O above bed : 500 mm Circulation O over face slide: 290 mm Center height: 250 mm Speed range: 10 – 3050 rpm infinitely variable With the following accessories: Slide protection with interior lighting 8-speed Sauter Revolver VDI 30 30 VDI 30 tool holders 2 driven tools VDI 30 1 collet chuck Coolant system 3 jaw chuck Röhm 0 250 mm 19 set of soft jaw inserts ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions
used
Cycle-controlled lathe GILDEMEISTER NEF 720 With control MANUAL PLUS 4110 Year of construction: 2001 Spindle bore: 92 mm Center width: 1500 mm Circulation O above bed : 710 mm Circulation O over face slide: 410 mm Center height: 350 mm Speed range: 36 – 1800 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix Tool Holder Coolant system 3 jaw chuck Forkhardt 0 315 mm ICP Contour Programming Tailstock with extendable drill quill Chip pan Operating instructions
used
turning diameter: 320 mm turning length: 750 mm control: Siemens type: 810DL CCUO turning diameter over slide rest: 150 mm cross movement: 185 mm spindle passage: 52 mm turning speeds: 14-3550 U/min transmission ratio: 2 quill stroke: 120 mm rapid traverse: 6 m/min main drive motor: 7 kW 3-jaw-chuck diameter: 200 mm total power requirement: 10 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,44x1,44 m 8950 turning hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Center distance: 1500mm, connected load: 24kVA, length: 3000mm, width: 1835mm, height: 1865mm, weight: 3.05t, including 250-chuck Bison, adjustable hollow spindle stop, quick-change head size C + 9 turning tool/drill rod holders.
used
Key data: 320 mm, 750 mm
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 5 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
used
turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden
used
turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5
used
Turning diameter: 910 mm Turning length: 2000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Manuel Plus MAKE Gildemeister TYPE NEF Plus 710 YEAR 1995 SPECIFICATIONS Swing over bed Ø 710 mm Control MANUEL PLUS Swing over cross slide 420 mm Distance between centres 2000 mm Spindle bore 92 mm Spindle speeds / ranges 1800 Rpm DIMENSIONS Length 4250 mm Width 2200 mm Height 1900 mm Gildemeister NEF Plus 710 cnc lathe
used
Spindle 1: 20 kW - 5000 rpm Spindle 2: 17 kW - 5000 rpm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis / Driven A-axis X1 movement: 165 mm X2 movement: 165 mm Y1 movement: 50 mm Z1 movement: 678 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Swing over bed: 70 mm Distance centre tot centre: 950 mm Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Command: Fanuc 310i Length: 4500 mm Width: 1990 mm Height: 2300 mm Weight: 10 ton Toolchanger: yes (2x) Number of tools: 12 tools (2x)
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...
used
Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...
used
Turning diameter: 500 mm Turning length: 1185 mm Turret positions: 12 Positions ATC: 0 Number controlled axis: 5 CNC Brand: _Unknown / Other CNC Model: DMG Ergoline MACH-id 5156 MAKE DMG GILDEMEISTER TYPE CTX beta 1250 TC 4A YOP 2012 SPECIFICATIONS Swing 700 X-Axis 490 mm Z-Axis 1200 mm Y-Axis 100 mm B Axis -160 ° B Axis +160 ° C Axis 360000 ° Control 840D Chip conveyor Yes Max. turning diamter Ø 500 mm DBC Turning length 1185 mm Main Spindle speed 5000 Sub Spindle speed 5000 Milling Spi ...
used
Turning diameter: 500 mm Turning length: 1300 mm Turret positions: 12 CNC Brand: Heidenhain CNC Model: Plus IT MACH-id 5144 MAKE Gildemeister TYPE CTX 520 Linear SERIAL 02280001451 YOP 2007 SPECIFICATIONS Swing 500 Control Heidenhain Plus IT Chip conveyor Yes Working hours 28.151 H Max. turning diamter Ø 500 mm DBC Turning length 1.300 mm Main Spindle speed 4.000 ATC / revolver 12
used
Turning diameter: 500 mm Turning length: 1300 mm Turret positions: 12 CNC Brand: Heidenhain CNC Model: Plus IT MACH-id 5144 MAKE Gildemeister TYPE CTX 520 Linear SERIAL 02280001451 YOP 2007 SPECIFICATIONS Swing 500 Control Heidenhain Plus IT Chip conveyor Yes Working hours 28.151 H Max. turning diamter Ø 500 mm DBC Turning length 1.300 mm Main Spindle speed 4.000 ATC / revolver 12
used
Turning diameter: 290 mm Turning length: 640 mm Turret positions: 12 CNC Brand: _Unknown / Other Make Gildemeister Type CTX 400 E Year 1996 CNC Lathe with revolver Centre height (mm)Swing = 290 Center distance (mm)Length = 640 Spindle bore Bore = 72 Speeds 5000 Rpm Revolver 12 Positions Collet device + inserts
used
This GILDEMEISTER CTX 400 E Lathe was manufactured in the year 1999 in Germany. It is equipped with a HEIDENHAIN CNC control and single driven tool. The working width is approx. 635 mm and the through-hole diameter ø50 mm through the head. It has 2 axes: z = 635 mm and x = 220 mm.
used
Turning diameter: 505 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik Make DMG Gildemeister Type CTX 410 Live tooling Year 2004 Dmg Gildemeister ctx 410 with CNC Siemens Centre height (mm) 505 Diameter Center distance (mm) 600 mm Spindle bore 76 mm CNC Siemens Turret 12 positions Live tooling- Dimensions - Length : 3.175 - Width : 2.080 - Height : 2.000 - Weight : 5.500 Kg
used
This Gildemeister Sprint 42 linear Lathe was made in the year 2006. It is equipped with a Fanuc 160i control unit. The machine has a spindle speed of 6500 rpm.
used
This Gildemeister CTX 400 S2 Lathe was manufactured in the year 1998 in Germany and has 65655 production hours. It is equipped with a HEIDENHAIN CNC PILOT 3190/4290 control unit. The machine has a spindle speed of 25-5000 rpm.
used
This GILDEMEISTER CTX 400 Serie 2 Lathe was manufactured in the year 1998. It is equipped with a DIN Plus Turn Plus control. It disposes of a turret with 12 tool positions and a tailstock.
used
This Gildemeister CTX 510 Lathe was manufactured in the year 2004 in Italy and has 36976 production hours. It is equipped with a Fanuc Series 21i-TB control unit. The machine has a spindle speed of 20-3500 rpm.
used
This Gildemeister NEF 710 Lathe was manufactured in 1998. It is equipped with Siemens 1 PH7137 main drive (rpm 2000). This machine has a tip height of 345mm and a tip width of 2000mm. It has a spindle bore of 92mm, a maximum torque of 1050 kN and a maximum chuck of 400mm. Contact us anytime for further information.
used
This Gildemeister TWIN 32 lathe was built in the year 2001 in Germany. It is equipped with a SIEMENS Sinumerik 840D control unit. The machine has a main spindle speed of 8000 rpm. 2 units are available.
used
This Gildemeister Sprint 65 linear Lathe was manufactured in the year 2008 in Italy and has 22399 production hours. It is equipped with a DMG FANUC 310 i control unit. The machine has a spindle speed of 5000 rpm.