used GASPARINI cnc pressbrakes

Max. bending length 3000 mm Max. pressure 135 Ton Length of stroke 250 mm Control DELEM DA 66 W Rapid movement speed 0 - 100 mm/sec Pressing speed 0 - 10 mm/sec Main motor power 15 Kw

Strength: 100T Folding length: 3000mm CNC: DELEM Working speed: 10mm/s State: good, fully working Status: visible

Press brake Gasparini PBS 105 machine currently in production in excellent condition of use CNC Delem 65 maintenance performed by photocells year 2002

Nominal Work Force T 100 Delem Control Da 66w Useful Bending Length Mm 3200 Controlled Axes N. 7 Notice Mm 500 Distance Of Uprights Mm 2600 Distance Of Table-rest Mm 500 Rest Stroke Mm 300 Approach Speed Mm/sec 200 Ascent Speed Mm/sec 180 Working Speed Mm/sec 10 Motor Power Kw 11 Weight T 9 Complete With: N.2 Motorized Drivers On Linear Guides Managed By Cnc Controlled Hydraulic Crowning Complete With Use And Maintenance Books Complete With Ce Certification

Sheet thickness: 8,00 mm void: 0 Table length: 3100 mm Table width: 0 mm Knife length: 0 mm MACH-id    4417 MAKE        Gasparini Italia TYPE           CO 3006 YEAR            2003 SPECIFICATIONS Guillotine / Lazer / Cutting table      Guillotine Cutting lenght         3100 mm Maximum sheet thickness         8 mm Backgauge stroke X in mm         1000 mm Power resonator kW / Amp       11 kW Controll        DELEM DAC Throat           500 mm DIMENSIONS Length          3300 mm Width           2800 mm Height          1900 mm  

Sheet thickness: 8,00 mm void: 0 Table length: 3000 mm Table width: 0 mm Knife length: 3000 mm MACH-id   4116 MAKE       Gasparini Italia TYPE         CO YEAR       2003 SPECIFICATIONS Controll    Digital read out Guillotine / Lazer / Cutting table     Hydraulic Cutting lenght       3100 mm Maximum sheet thickness       8 mm Throat           500 mm Backgauge stroke     X in mm      0 - 1000 mm Power resonator kW / Amp      11 kW DIMENSIONS Length       3100 mm Width         2100 mm Height       1900 mm

pressure: 105 t chamfer lenght: 3100 mm distance between columns: 2600 mm table width: 100 mm table height: 750 mm Control: DELEM DA 65 dayligth: 200 mm working feed: 0 - 10 mm/sec return speed: 0-100 mm/sec rapid traverse - up: max. 100 mm/sec voltage: 380 V / 50 Hz total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4 x 2,2 x 2,8 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 25 t Opening maximum: 1250 mm Workpiece height maximum: 150 mm CNC Brand: Delem CNC Model: Delem DA-66W PressbrakeGASPARINI - X-Press 25 MACH-ID 7555  Max. bending length:        1250mm Distance between column:    1200mm Max. pressing force:        25T Dis. Beam - Table:          150mm Troth beam:                 340mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               200mm/min. Adjustment X-Axis back gauge:500mm Number of controlled axis:  5 Power:                      3kW Length:          &nb ...

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm ** good / well-maintained condition (!!) Furnishing: - DELEM CNC control model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library * including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, inclu ...

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm ** Machine in good / well-maintained condition (!!) Furnishing: - DELEM CNC control - model DA 65 * Swivel control panel, front right * 2D graphical programming & product display * Tool & program library - CNC controlled axes: * Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping ...

Hybrid press brake Builder: LAG (Gasparini Family) Model: GHT 185 x 3000 Bending power: 185 tons Folding length: 3050mm CNC: Y1, Y2, X, X3, Z1, Z2 Rear pneumatic supports for sheet metal WILA type upper connection with hydraulic tightening WILA type lower connection with hydraulic tightening Dynamic compensation table with front supports for sheet metal Safety laser New Electronics DELEM CNC touchscreen year of construction: 2020 working hours: 0

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Working length: 3,050 mm Cutting capacity: 6 mm steel 4 mm stainless steel Backgauge range: 1,000 mm Cutting angle adjustment: 0.5 - 2.5 degrees Equipped with: - 4x sheet metal support arms - Foot pedal - Sheet metal holding device at the back - Safety light curtain at the back Country of origin: Italy Motor power: 7.5 kW Machine LxWxH: 3,500 x 2,200 x 1,700 mm Machine weight: 6.600 kg

This GASPARINI XP 150/3000 Bending machine was manufactured in the 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting up. There is an issue with the software, and the control screen is black.

This GASPARINI 2040 Plasma Cutting Machine was manufactured in the year 2008 in Italy. It is equipped with a Plasma HYPERTHERM HPR 130. The machine has a cutting size of 4000x2000mm and the extension of the working area is of a 4000x2000mm. The max. sheet thickness is of 30mm and to be processed is of 60mm.

sheet width:approx. 300 mm plate thickness:approx 1,5 - 2,0 mm stations:8 column movement:80 mm Shaft adjustment - vertical -:170 The center height of lower roll is 234mm The longitudinal distance betwin roll centers is 600mm Available: only hardware from Gasparini + a hydraulic device and a small control cabinet for the cutting unit. There is no control cabinet or control included. No manufacturer number.

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

500 ton x 5000mm Y1 Y2 X1 X2 R1 R2 Z1 Z2

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

BYSTRONIC PR 150 Ton x 4100mm Over Bed CNC Press Brake. Including Cybelec DNC 1200 6 axis control. (Y1, Y2, X, Z1, Z2, R) Auto Crowing. Laser guards. Hydraulic Top Tool Clamping. Side and Rear safety fences. Tooling Carousel. S/No 04430044. New 2004.

working lenght 3.050 mm power 60 ton throat deepth 350 mm CNC cybelec nr.02 axes back gauge manual table compensation

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...