used EMCO vertical processing centers

Control Siemens 810 D with shopmill Travel X/Y/Z 420/330/240 mm Speed 5000 1/min Tool magazine for 12 tools SK 40 Table surface 850x325 mm Weight 2900 kg

Inv. Num. : 7370 Type: EMCOMILL E350 Producer: EMCO Created: 2018 Parameters: Control system: SIEMENS Duty cycle: 6404 h Work table length: 520 mm Work table width: 300 mm Maximum table load (even): 100 kg Spindle drive power: 6.8 kW Number of synchronized axes: 3 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 300 mm Number of tools: 20 pieces Maximum tool length: 200 mm Machine height: 2200 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 1970 kg Equipment: 20x Tool Holder

This EMCO E900 Vertical Machine Center was manufactured in the year 2015 and has 39500 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 10000 rpm.

Table length: 1300 mm Table width: 520 mm Longitudinal X: 1000 mm Cross Y: 500 mm Vertical Z: 600 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens 3-axis CNC machine (VMC)EMCO Famup - VMC 100  X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              600mm Table Length:            1300mm Table Width:             520mm Table load:              800 Feed rate X-Axis:        30000mm/min. Feed rate Y-Axis:        30000mm/min. Feed rate Z-Axis:        30000mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:      &nbs ...

This Emco Emcomill E 1200 Vertical Machining Center was made in 2014 in Germany and has 14677 production hours, of which 3402 are spindle hours. It is equipped with a Siemens Sinumerik 828 D control unit and has 4 axis. The machine has a spindle speed of 12000 rpm, is in very good condition, and is well maintained.

This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit.

CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21 2011 perfect quality

A machining center with a pallet changer from the manufacturer Emco Famup is offered here. The machine was used in the training sector and is therefore in very good condition. Manufacturer: Famup Emco Model: MCP 70-50 Year of construction: 2013 Control: Siemens Sinumerik 840D with PCU20 Specifications: Spindle power 35 kW/S6 (22.5 kW/S1) Speed: 50 - 12,000 rpm Torque: 120 Nm/s6 (76 Nm/s1) Tool holder: ISO 40 DIN 69871 Drum magazine 30 tool positions Travel distances: 700x500x640 mm Rapid traverse X-Y-Z: 40 m/min Clamping surface: 600x450mm Pallet changer Machine dimensions: 4000x2500x3000 mm Machine weight: 5500 kg Conveyor Coolant system Switch-on hours: approx. 22,000 h Spindle hours: approx. 11,000 h Working hours: approx. 9,800 h

X/Y/Z 200 / 150 / 250 mm Distance spindle-table 95 - 245 mm Rapid traverse in X/Y/Z 5 m/min Working feed X/Y/Z - 5 m/min Clamping surface 420 x 125 mm table load 10 kg speed 5000 rpm drive power 1.1 kW Number of tool stations10 tool diameter 55 mm tool length 50 mm Dimensions (LxWxH)1135 x 1100 x 1100 mm Machine weight 400 kg

Emco ET 420 / Double spindle lathe, Year of construction 2004, Control Siemens, max rod passage 26 mm, max. part length 600 mm, 2 main spindles, 2 counter spindles, Double rods loading magazine, Main spindle up to 5,000 rpm, C axis 0.01° , Revolver 2 x 12 fach VDI 16, 4 angetr. Tool stations / turrets, Conveyor coolant device, Parts catcher long parts ( self-made )

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Key data: 430 mm, 744 mm

Machine from prototype construction Emco Hyperturn 665 MC Powermill Turning - Milling Center, Built in 2003, Control Siemens, Turning length 744 mm, Swivel Ø 430 mm, Y axis +/- 50 mm, 2 x C axis 0.001°, Revolver 12 speed VDI 30, Milling head - B axis infinitely variable, Tool magazine 48 speed - Capto C 4, Counter spindle, rods up to 65 mm, Spindle speed up to 7,000 rpm, Coolant pressure 25 bar, Collet chuck E 185 E on main spindle, Three-jaw chuck Röhm KFD - HS 200/3 on counter spindle, Workpiece collection device main/counter spindle, Accessories

Key data: 310 mm, 520 mm

Machine type: CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of construction 2007 Control Sinumerik 810 D Siemens Storage location Sweden Country of origin: Austria Delivery time by arrangement Cargo Base EXW Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-axis : 360° max. oscillating diameter above bed : 540 mm max. oscillating diameter over face slide: 360 mm max. turning diameter : 310 mm max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main Spindle: Speed range - main spindle 60 - 4,200 min/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001° Tool turret: 12 positions Tool holder VDI 30 DIN 69880 Driven tool stations: Number of driven tool stations 12 pos. Speed range - addressed Tool stations 0 - 5,000 min -1 Drive power ma ...

Emco Maxxmill 500 5 axis machining center Year of construction 2011 Heidenhain TNC 620 3 + 2 axles Spindle with 10,000 rpm 30-speed tool changer SK40 Hinged Chip Conveyors

This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.

Table length: 500 mm Table width: 320 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: Heidenhain CNC Model: HeidenHain TNC 124 SK 40 tools included Collet device included Equipped with handwheels X-Axis:         700mm Y-Axis:         500mm Z-Axis:         500mm Table Length:   500mm Table Width:    320mm Table load:     600 Spindle speeds: 3150Rpm Feed rate X-Axis:3000mm/min. Feed rate Y-Axis:3000mm/min. Feed rate Z-Axis:1500mm/min. Stroke pinole:  100mm Length:         2150mm Width:          1900mm Height:         2320mm Weight:         2550kg

Description: Fabrication number: 06AL3001 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: screen is defective, therefore replacement monitor Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine ...

Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed force X and Y: 5000 N Feed force Z: 8800 N Feed force: 5 kg Max. permissible tool weight: 5 kg Total permissible tool weight in the magazine: approx. 50 kg Max. Tool diameter with adjacent tool diameter 4 ...

The EMCOMILL 750 CNC machining center is in very good technical condition. By agreement, it is possible to see under the current. Air cooling, internal cooling 20bar. Machine weight: 9000 kg Clamping surface of the table: 900x630 mm Longitudinal movement of the table - x-axis: 750 mm Transverse table movement - y axis: 550 mm Vertical movement of the table - z axis: 500 mm Spindle speed: 12000 rpm Number of places in the stack: 30 pcs Max. workpiece weight: 800 kg Machine dimensions lxwxh: 3158 x 2970 x 3000 mm

CNC milling machine with mechanical spindle. Travel in X/Y/Z 350/250/300 mm Spindle nose distance 120-420 mm High movement speeds in X/Y/Z 24/24/24 m/min Clamping surface 520x300 mm Max. table load capacity 100 kg. Number of tool stations 20 Tool change time (tool to tool) 2.5 s Max. tool diameter 63 (80) mm Max. tool length 200 mm. Dimensions (LxWxH) 1600x1700x2200 mm Machine weight 1970 kg.

EMCO - Loading arm 4 inches - used - as spare part carrier

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm