used DOOSAN VC

x-travel: 3000 mm y-travel: 850 mm z-travel: 800 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: 24000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Table size: 2500x870mm/3500kg load Rotary table: 800mm dia/1200kg load XYZB : 2000x850x8500mm x +-110 degree Rotary table: dia 800mm Spindle taper: BT40 Spindle speed: 12000rpm 18.5/22kw spindle motor 60 tool ATC Scales XYZ axis Chip conveyor Includes shipping to any major seaport in the world z-motion: 800 mm, x-motion: 2,000 mm, y-motion: 850 mm, control: Fanuc 31iA-5AX, table surface area l x w : 2500 x 870 mm, toolchanger positions: 60, power capacity - spindle: 18.5/22 kW, turning speed range: 12,000 rpm, weight approx.: 22,000 kg, setting measure approx (l x w x h): 3,795 x 4,440 x 3,205 mm

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

Y.O.M.: 4/2019 Serial Number: ML 0404-000160 Stock Nr: 13200 Manufacturer: Doosan Model LYNX 2100LYB Location: Greece Overview Basic Specifications – 600mm Swing Over Bed – 400mm Swing Over Saddle – 510mm Turning Length – 300mm Turning Ø – 105mm (±52.5mm) Y Axis Travel – 360deg (0.001deg Resolution) C Axis – 150kg Main Spindle Capacity, 300kg Shaft Work Capacity Main Spindle – 65mm Bar Capacity – 200mm Ø Hydraulic Chuck – 4500RPM Spindle Speed – 15kW Spindle Power – 169Nm Spindle Torque Tailstock – MT4 – 880mm Travel – Hydraulic Programmable Positioning Turret – BMT 45 Tool Mounting – 6000RPM Live Tool Speed – 3.7kW Live Tool Power – 23.5Nm Live Tool Torque – 24 Position / 12 Station Turret – 20mm Square / 32 & 20mm Ø Tool Capacity – ER20 Live Tool Collet Size – Eppinger Preci-Flex Tooling System ...

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

Turning diameter: 900 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: OT DOOSAN - PUMA 450 CNC Lathe Ø 900 x 1000 mm MACH - ID 6351 Make: DOOSAN Type: PUMA 450 Control: Fanuc OT YOP: 1997 Max. turning Ø    900 mm X-Axis    370 mm Z-Axis    1.075 mm Spindle bore       117 mm Speedrange         2000 Rpm Spindle power    37 kW ATC / revolver    12 Chip conveyor      yes Pinole taper          6 Mk Stroke pinole       150 mm Quill Ø     150 mm Dimensions Length      6.200 mm Width        2.460 mm Height       2.800 mm Weight      14.000 kg

DOOSAN PUMA MODEL 3100ULY CNC TURNING CENTER WITH MILLING AND Y-AXIS DOOSAN FANUC i-SERIES CONTROL 15" CHUCK 16.5" MAX TURN DIAMETER 123" MAX TURN LENGTH 4" BAR CAPACITY 2,800 RPM 12-POSITION TURRET PROGRAMMABLE STEADY REST TAILSTOCK CHIP CONVEYOR ACCESSORIES: SWARF CONVEYOR; HYDRAULIC REST; TOOL SETTER; PCMCIA SERIAL PORT Servo driven tail stock. (6) AXIAL LIVE TOOL HOLDERS (1) RADIAL LIVE TOOL HOLDER Dimension Machine Height 2.315 mm Machine Length 6.585 mm Machine Width 2,280 mm Machine Weight 12,300 kg Belt-driven spindle Power source: AC200/220V, 3" PE, 50/60 Hz EZ-Guide i

BRAND: DOOSAN YEAR: 2019 MODEL: PUMA 3100LY PRODUCTION HOURS: 1150 APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 2280 MM MEASUREMENTS DEPTH: 5595 MM MEASUREMENTS HEIGHT: 2315 MM MACHINE WEIGHT: 10800 KG CONTROL UNIT BRAND: DOOSAN FANUC MODEL: I SERIES MAIN DRIVE SPINDLE SPEED RANGE: 3000 1/MIN SPINDLE MOTOR POWER: 22/18.5 KW MOVEMENT X-AXIS MOVEMENT: 293 MM Y-AXIS MOVEMENT: 2190 MM Z-AXIS MOVEMENT: 130 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - ROTATING DIAMETER ON BENCH 850 MM - ROTATING DIAMETER ON THE UNDERCARRIAGE 670 MM - MAX. TURNING DIAMETER 420 MM - MAX. TURNING LENGTH 2125 MM - BAR DIAMETER 102 MM - SPINDLE HOLE DIAMETER 115 MM - NUMBER OF TOOL STATIONS 12 - EXTERNAL TOOL SIZE 25 MM. - BORING DIAMETER 50 M ...

Turning diameter: 630 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21i-TB MACH-id    4209 MAKE        DOOSAN TYPE          PUMA 280 M YEAR         2008 SPECIFICATIONS Swing over bed    630 Swing                  500 X Axis                  242 Z Axis                   680 Controll                  Fanuc 21i-TB Tool changer          12 Chip conveyor        Yes Swing over bed Ø      630 mm DIMENSIONS Length       4000 mm Width         2550 mm Height  ...

Turning diameter: 570 mm Turning length: 650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 21 iTB MAKE   DOOSAN TYPE    PUMA 240 MB YEAR   2004 SPECIFICATIONS Swing over bed Ø  570 mm Control    FANUC 21 i TB Swing in the gap Ø  370 mm Distance between centres   650 mm Spindle bore   77 mm Spindle speeds / ranges  3500 Rpm Power   18.5 Kw DIMENSIONS Length   3430 mm Width    1800 mm Height    1800 mm Doosan PUMA 240 MB Ø 570 with Live tools, we have also some other cnc lathes for sale

Turning diameter: 550 mm Turning length: 513 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm* Bar feeder IEMCA 65 mm * Bar feeder interface * Chip conveyor * 7 Bar Coolant * Tool eye * Tool Gripper * Tool managment  

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

Key data: 480 , 600

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, control panel, complete.

BRAND: DOOSAN YEAR: 2017 MODEL: DNM350/5AX PRODUCTION HOURS: 1685 APPLICATION TYPE: MILLING LOCATION: SOUTH KOREA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES 31I-MODEL B5 MAIN DRIVE SPINDLE SPEED RANGE: 20000 1/MIN MOVEMENT X-AXIS MOVEMENT: 400 MM Y-AXIS MOVEMENT: 655 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 220V /50-60HZ Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - TS27R (RENISHAW) - TOOL SHANK: BT40 - INDEX DEGREE FOR TABLE:0. 001 DEGREE - SPINDLE AIR CURTAIN - THROUGH SPINDLE COOLANT 70 BAR - HELICAL INTERPOLATION, SPINDLE THERMAL COMPENSATION - STORED PITCH ERROR COMPENSA. - OPTIONAL CHAMFERING/CORNER ROUND - DSQ2 (AICC 200 BLOCKS & DATA SERVER 1GB) - DOOSAN TOOL MONITORING, AIR CONDITIONER, OIL COOLER, OIL S ...

Key data: 480

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Turning diameter: 320 mm Turning length: 350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi-Tc MACH-id     5463 MAKE         Doosan Korea TYPE           Lynx 220 YOP             2009 SPECIFICATIONS Max. turning Ø    320 mm X-Axis         175 mm Z-Axis          330 mm Spindle bore       51 mm Speedrange       4000 Rpm ATC / revolver        12 Control    FANUC Oi-TC Chip conveyor         yes Tool eye       yes Pinole taper        4 Mk Stroke pinole        80 mm Quill Ø       65 mm DIMENSIONS Length  &nbs ...

Turning diameter: 510 mm Turning length: 650 mm Turret positions: 12 CNC Brand: Fanuc MACH-id     5372 MAKE          DOOSAN TYPE            LYNX 220 LM YOP              2008 SPECIFICATIONS Max. turning diameter Ø       510 mm DBC Turning length        650 mm X-Axis       175 mm Y-Axis       650 mm C-Axis        360000 ° Spindle bore      51 mm Speedrange        5000 Rpm ATC / revolver       12 Speed live tools      6000 Rpm Control            FANUC Chip conveyor        Yes Tool eye          Yes Pinole taper ...

Support / Pratzen/ Traverse N83ymlcr from a MobilExcavator Doosan with a total weight of approx. 16-19to. The attachment part is almost unused and was track suspension immediately after the new purchase of the excavator. It can be mounted in place of the clearing shield or on the opposite side. The exact year of construction and the type of excavator are not known.

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Doosan DNM 6700 Machining Center Vertical CT40, 30 ATC, CTS X-travel 1300 mm Y-travel 670 mm Z-travel 625 mm Round table (4th axis) Yes Control CNC FANUC iSeries Table length 1500 mm Table width 670 mm Workpiece weight 1300 kg Tool changer 30 Max spindle speeds 120000 rpm Spindle motor power 33 kW Length x Width x Height 2597.0 × 3350.0 × 3120.0 Weight 8500 kg

; Gross weight [kg]: 9370; Engine: Doosan DP222CC (E); Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

BRAND: DOOSAN YEAR: 2017 MODEL: LYNX 220LSY APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MAIN DRIVE SPINDLE SPEED RANGE: 4500 1/MIN NUMBER OF AXIS: 4 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX DIAMETER 300MM - SUB SPINDLE: 6000 RPM - FULL CONTOUINGR C-AXIS - HEAVY DUTY 12 STATIONS TURRET THAT ACCEPT ROTATING TOOLS HOLDERS AND 24 POSITION INDEXING QUALITATIVE MACHINE BENEFITS: - MACHINE COMES WITH LEMCA BOSS 552 HEAVY DUTY - MILL-DRILL CAPABILITY AND Y-AXIS WITH FULL C-AXIS SUB SPINDLE, GREATLY REDUCE THE NEED FOR SECONDARY OPERATIONS, ELIMINATING ADDITIONAL SET-UP AND HANDLING COSTS. CLASSIC MANUFACTURING METHODS AND ULTRA RIGID CONSTRUCTION ARE COMBINED WITH ADVANCED TECHNOLOGICAL FEATURES TO PROVIDE EXCEPTIONAL VALUE. MAIN FEATURES - ...

DOOSAN LYNX 220LSY 5-AXIS CNC TURNING CENTER Y-AXIS SUB SPINDLE FANUC OI MODEL D CONTROL HENNIG CHIP CONVEYOR ROYAL QUICKCHANGE COLLET SYSTEM TO INCLUDE: CART AND TABLE WITH SPARE TOOLING TOOL HOLDERS SPARE CHUCKS QUICK CHANGE COLLET SET FOR ROYAL COLLET SYSTEM MANUALS 4000kg

BRAND: DOOSAN PUMA YEAR: 2018 MODEL: 5100LB APPLICATION TYPE: TURNING LOCATION: UNITED KINGDOM MACHINE TYPE: LATHE AVAILABILITY: 01 10 2023 Technical Information CONTROL UNIT BRAND: FANUC MODEL: SERIES OIT MAIN DRIVE SPINDLE SPEED RANGE: 1500 1/MIN NUMBER OF AXIS: 2 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SWING OVER BED: 900 MM - SWING OVER SADDLE: 690 MM - MAX TURNING DIA: 650 MM - DISTANCE BETWEEN CENTRES: 204. 2 MM - SPINDLE BORE: 181 MM - BORE THROUGH DRAW TUBE: 166. 5MM - SPINDLE POWER: 37/45 KW - MACHINE WITH: 530MM 3 JAW HYDRAULIC CHUCK QUALITATIVE MACHINE BENEFITS: - OIL SKIMMER - SWARF CONVEYOR - FLOOD COOLANT THROUGH TURRET