used BANDERA TR

Bandera Extruder Tr 60 - Diam 28 Ld Year 1991 Material Pp - Pe 12 Zone Control Panel Cear Mlf 180 K engine DC Drive Motor Vecc130 Hp 40 -- 75 - 2500 Rpm

We would like to sell Extruder Bandera T150 and Troester with included feeding line, cooling line and cutting sector. This machine was used for production of Neolite Rubber Sheets. More information upon request!

Entire coextrusion line consisting of: - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1969 - variable V gearbox - Bandera extruder 80 - 20 L / D - 60 kW, 400 V - year 1965 - mechanical gearbox - 700 mm coextrusion table - Towing cutter, oven, Tecnofar exit tunnel with hydraulic variators - Omipa calender width 1000 mm with hydraulic variators - year 1976

Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.

Extrusion line consisting of: - Bandera 45 extruder - year 1960 - 15 kW, 400 V - diameter 45 - ratio L / D 20 - mechanical gearbox - Gauge holder bench - towing - disc cutting and overturning - Pagani brand

Bandera 60 extrusion line 25 kW, 400 V Year 1961 Diameter 60 L / D ratio 20 Variable V gearbox With electrical panel Gauge holder bench with vacuum pump and variable speed track drive, Pagani brand

Bandera single screw extruder. Single screw up to 150 - 200 kg/ h depending on the material. In the past was working with PVC.

Extrusion line consisting of two extruders: - Bandera 60 extruder - year 1960 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - variable V gearbox - Union extruder 60 - 30 kW, 400 V - diameter 60 - ratio L / D 20 - mechanical gearbox - 400 mm coextrusion table - Towing, cutter, oven, Pagani exit tunnel - Tecnofar calender width 450 mm

Sale of 2 lines for single screw extrusion, diameter 60 mm due to cessation of activity: Bandera 1975 and TPV 1985.

Complete retrofitted line consisting of: Processable material: plasticized PVC composition active pay off passive pay off Bandera 4020 extruder retrofitted with Toshiba ivnerter cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 600 reels

Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels

Used Bandera TR 45 Extrusion - Single screw extruder used and in working condition year 1989

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

Description Cutter for pipes

screw ø:: 60 mm screw length:: 11D screw speedl:: -- U/min drive power:: 18,5 kW Condition: used, overhauled Specification: rubber extruder - used - screw diameter: 60 mm - screw length: 11D - screw length: approx. 660 mm - overhaul of screw and barrel - Overhaul of feed roller and safety cage - New rotary union for water - AC motor: 18.5 kW - New control cabinet with frequency converter for variable speed - New cabling - Pressure and temperature sensors on the extruder head - Safety device - CE marking and an operating and maintenance manual in English Overhauled according to CE-Standard safety regulations Warranty: 1 year Option: 3x temperature control units up to 95°C water temperature Power: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Flag. No motor, no electrical panel, with 6-speed gearbox.

Refer to code 1042 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Extrusion line for the manufacture of 100 mm forest protector composed of: - Extruder 1 spindle, brand: Flag, 60 mm 25 L / D, motor: 30 hp. With variable speed drive and electrical panel. With charger on single-phase hopper. - Stainless steel cooling bath: 4 m. With 2 vacuum pumps: 4 Kw (5.5 hp) each. - Drag trolley: 2100x190 mm - Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.

Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.

Extrusion line for the manufacture of 30 and 40 mm tutors composed of: - 1 spindle extruder: 60 mm Ø Plasticization 25 L/D. Brand: Flag, motor: 32 Kw (45 hp) direct current, year: 1998. With variable speed drive, gearbox and electrical panel. - Cooling bath: 3 m, with caliper, water pump: 3 hp, vacuum pump: 4 Kw (5.5 hp). - Track drag trolley: 1300x130 mm, brand: Weber, model: RA302, motor: 5.5 Kw. - Cutting saw brand: Pericolo, diameter: 300 mm, motor: 2.2 Kw (3 hp).

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 75 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting with pellet cooler, screen, venturi and big-bag bagging.

Key data: 120

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 40 L/D, engine: 100 hp. Variable speed drive, degasser, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag bagging.

Key data: 120

Extruder 1 spindle (pelletizer). Brand: Flag, 120 mm Ø, 25 L/D, engine: 100 hp. Variable speed drive, hydraulic filter changer: 120 mm, air head cutting, venturi screen and big-bag.