FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. ...

Ferromatik Milacron Elektra EE110-300 Evolution from 2006 Control panel : Mosaic Working hours 79 488 h (03/03/2021) Screw diameter : 30 mm All the information are taken from the documentation of the manufacturer (attached in the pictures). Machine in good running condition. All electric machine. Moulds running on the machine are toy moulds running ABS parts. Machine spec sheets attached.

Ferromatik Milacron Elektra 300 S Electric injection moulding machine Machine in very good condition. ...

• more information

Ferromatik Injection Moulding Machine Type: Milacron Elektra 100 p. 14866 Runhour, Full electric Control: IQT Year: In 2000 Clamping unit Clamping force t: 100 Opening stroke mms: 920 Distance between tie bars mm: 470 x 470 installations height min / max. mm: 250/520 Mould fixing platen size h x v: 690 x 690 Injection unit Screw size mms: 40 Injection shot weight in Polysterol gr: 180 Injection volume cm?: 201 Injection pressure increased cash: 2530 Size and weight dimension HxWxD m: 7.6 x 1.8 x 2.2 Totally weight kg: 6930 Additional information 14866 Runhour euro map 12

Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical p ...

Machine in very good condition. The machine has 2 engines (injection and dosing) after a comprehensive service, replacement of bearings and recalibration - the cost of this service alone is almost € 5,000 A large part of the closing system pins is also replaced and, what is very important, the factory defect of these machines consisting in cracking of the casting body has been removed.

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heatin ...

Ferromatik Milacron K-TEC250S injection molding machine for PET preform -Model : K-TEC250S -Manufactured year : 2006  ...

• more information

includes FMR6-5 Robot (Wemo) X: 420mm / Y: 1200mm / Z: 2.150mm / C: 90? Rotation 1 x gripper / 1 x vacuum incl. safety fences + conveyor belt 3000 x 600 - Screw diameter: 45 mm - Clamping force: 1.500 kN - Shot weight max: 272 g - Injection pressure: 1.568 bar - Injection volume: 286 cm? - Mould opening stroke max: 440 mm - Mould height max: 510 mm - Mould height min: 150 mm - Daylight between platens max: 950 mm - Distance between tie-bars (h x v): 510 x 510 mm - Control: Endura Touch - Core pulls: 2 - Weight: 7.500 kg - Dimensions (long x wide x high): 6.400 x 2.000 x 2.500 mm