We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Technical data for the Tiefensteg: Manufacturer: SSI Schaefer The scope of delivery includes: 01x Tiefensteg, used Material colour: grey Total length: approx. 1,108 mm f. column depth: approx. 1,100 mm Clear span: approx. 999 mm Truss support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / pcs.: approx. 8,020 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of deliv ...
Support , traversing carriage of a Schaublin lathe, sgt. Condition See photos ! Rotatable, feed via lever, feeder, axles are clampable! Is for a lathe brand Schaublin ! Shipping possible ! ...
The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 990 mm (support rod direction) Total width: 1,195 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.07 kg | Pcs. Weight / pallet: approx. 360.00 kg Internal designation: L Note: - The frame was flanged inwards from all sides. - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of th ...
The scope of delivery includes: 30x gratings, used Material color: hot-dip galvanized Total depth: 995 mm (support rod direction) Total width: 1,190 mm (crossbar direction) Support rod diameter: 40/2.0 mm Frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11.44 kg | Pcs. Weight / pallet: approx. 370.00 kg Internal designation: K Note: - The gratings can be damaged, scratched, dented, Welding, etc. show. - The above price is only valid if a complete range of 30 pcs. General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are c ...
The scope of delivery includes: 01x Depth bar frame, used Material colour: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Truss support: approx. 50 mm Support angle: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1.2450 - 1.070 mm Front Tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: It is a used item, there may be scratche ...
Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness: 13mm Max. cutting length: 3.100mm Strokes on full length: 18mm Strokes in short 1000 length:46 Cutting angle: 0,5 - 3 ° Length backgauge: 0 - 1250 mm Number of down holders: 20 Approach speed: 125mm/sec. Control: TS 200 Power: 30 ...
Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm equipped with Return to Sender equipped with Sorting system Maximum sheet thickness: 13mm Max. cutting length: 3.100mm Strokes on full length: 18mm Strokes in short 1000 length:46 Cutting angle: 0,5 - 3 ° Length backgauge: 0 - 1250 mm Number of down holders: 20 Approach speed: 125mm/sec. Control: TS 200 Sheetsupport:&nbs ...
Sheet thickness: 10,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness: 10mm Max. cutting length: 2.000mm Strokes on full length: 100mm Strokes in short 1000 length:1000 Number of down holders: 11 Approach speed: 50mm/sec. Power: 15kW Length: 2.700 mm Width: 2.050 mm Height: ...
Sheet thickness: 6,00 mm Sheet width: 2000 mm Depth rear gauge: 0 mm Maximum sheet thickness: 6 - 4 mm Max. cutting length: 2.060mm Strokes on full length: 30mm Strokes in short 1000 length:55 Cutting angle: 1,20 ° Length backgauge: 1.000mm Number of down holders: 9 Power: 7,5 kW Length: 2.150 mm Width: ...
Sheet thickness: 25,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness: 25mm Max. cutting length: 3.070mm Strokes on full length: 7mm Strokes in short 1000 length: 12 Cutting angle: 0,5 - 2,5 ° Length backgauge: 1.000mm Number of down holders: 15 Control: Siemens Safety guides: &nb ...