for LDPE HDPE PP ABS PC PS, Nominal throughput rate 350-450 kg/h depending on feeding reate and material including scrap silo fedding auger crammed feeder extruder with 105 mm screw 40 LD double degassing 110 kw a.c.drive non stop hydraulic screenchanger water ring pelletizer drying centrifuge electrical cabinet user’s manuals and drawings constructed in 2000 offered RECONDITIONED, On request, we can fit this extruder with a fully automatic screenchanger.

GAMMAMECCANICA EXTRUDER, for PE PP PS ABS PC PA, barrel with screw diam.90 mm., loading hopper, semi-automatic hydraulic screen-changer, hydraulic pack, strand die, cooling bath, strand pelletizer, electric cabinet, Construction year 2008, The line is offered totally reconditioned, Possible replacement of cutting system into water ring, Possible addition of fully automatic screen-changer, classifier, blender,..

The line is offered TOTALLY RECONDITIONED., PREALPINA EXTRUDER 180 mm. 2 degassing points, for LDPE HDPE PP PS PC ABS EPS EPE EPS XPS..., average throughput rate 800-1.200 kg/h depending on materials and feeding rate Including: Buffer silo with agitators and feeding auger. Forced feeding unit. Extruder with 180 mm bimetallic screw 40 L/D Double vacuum degassing system a.c.355 kw a.c.drive controlled by ABB inverter Semi-automatic non-stop screen-changer with 300 mm diam. screens., FULLY AUTOMATIC NEW SCREEN-CHANGER AVAILABLE (+200 K€ +/-) hydraulic power pack Water ring pelletizing unit. Drying centrifuge., water re-circulating tank, Heat exchanging unit on gearbox group + cutting unit. Vi ...

LEDA EXTRUDER 160 mm 50 LD 2 degassing pumps, for PP PS PE ABS PC, etc., Very good quality for this extruder, 2 m3 ca. storage silo, crammed vertical screw for light materials with adjustable speed,, extruder with barrel 160 mm. screw, 50 L/D, Infra Red Heaters, 355 kw a.c.drive with inverter (about 60% power used in work), Double vacuum degassing system, Control cabinet, Nominal throughput rate 800-900 kg./h, The extruder is offered RECONDITIONED, and can be completed with FULLY AUTOMATIC SCREENCHANGER + PELLETIZER, L/D RATIO: 50:1

For extruders 500 to 1500 kg/h Supporting structure made in sturdy steel with sides made in special alloy. Group of dandy rolls to guide the streams Lower roll in cemented steel Upper, pressing roll made in nitrated steel, pneumatically lfted Asynchrone drive with inverter Cutting unit with dual cutting edge Made in anti-wear steel Electrical control panel with general switch,service switch and amperometer Adjustable speed Rotor diam. 240 mm. N.28 teeth on rotor Counter-blade length 350 mm. 2 cutting edges, 11 kw drive Include n.1 extractor, User’s manual, CE compliance

AIR PELLETIZER FOR PVC AND COMPOUNDS for throughput 500 to 1500 kg/h connection flange built on Clients design made in steel heated by ceramic heaters, temperature probe and protection carter, stainless steel granulation chamber on horizontal axix, quick opening, knife-holder with fluctuating star to reduce knives consumption., self adjusting knives to nozzle by means of a spring which keeps knives pressed, with less wearing out and increased efficiency n.1x 3 kw motorwith extra strong bearing and long shaft, cutting die in anti-wear steel with number and Ø of holes bespoke to project. 1,5 kw blower, Venturi system, knife template, electric cabinet and touch screen control board with modem  ...

PELLETIZERS WATER RING, Constructed with first quality materials and components they are reliable accessories to your extrusion line, compact and economic., made in sturdy stainless steel, With self adjusting knives to nozzle, with less wearing out and incresed efficiency, re-circulating water pump with water filtering unit for re-use, Heat exchanging unit included. You can connect it with your factory chilling unit., electric cabinet with Siemens touch screen for setting all parameters, Modem for remote assistance, Suitable for a variety of plastics and masterbatches., Size bespoke to your project : 100 to 3.000 kg/h, Materials : LDPE HDPE LLDPE PP PS PC ABS, CAPACITY: 100-3.000 KG.

REF-2102 DOUBLE TWIST HARD CANDY WRAPPER GD BOLOGNA Machine number 1. Format: 1.2. Dimensions: 1.300mm width, 2.200mm length, 1.700mm height.  ...

• more information

General SKU354T966 LocationBarneveld MakeClextral TypeBC45 Mach.No.876 Main Features Motor21 KW Inlet diameter105 mm L/D28 Specified Features - Double screw extruder Double screw extrudercheck Number of hours1223 Screw diameter55 mm L/D28 Counter rotatingcheck Number of heating zones:5 Electric heatingcheck 7kW each Water coolingcheck DC-motor21 kW, 430 Volt Screw speed50-300rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialMild steel Information Year of construction1990 With switchgearcheck(as is) Sizes switchgear3,3x0,62x2,26 m Total height2,3 m CEcheck Floorspace4,25x1,25 m Weight2300kg Extra Specificationsmachine comes with additional parts. ...

General SKU231U203 LocationBarneveld MakeLeistritz TypeSZE-50 GL Mach.No.94.91.2168/7 Main Features Motor52 KW Inlet diameter49.7 mm L/D42 Specified Features - Double screw extruder Double screw extrudercheck Number of hours31783 Screw diameter49,7 mm L/D42 Co-rotatingcheck Number of heating zones:9 Electric heating33 kW Water coolingtype: ZIK - (Zylinder Intensiv Kühlung, eng. Barrel intensive cooling) DC-motor46 kW, 460 Volt AC-motorside dosing screw of the extruder: 1,5 kW 230-400 Volt Screw speedmax. 400 rpm MaterialNitriding Steel 1.8550 Information Year of construction1994 Sizes switchgearcheck(as is) Total height1,9 m CEcheck Floorspace4,26x0,80 m Weight ...