We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
- X: 420 mm - Y: 330 mm - Z: 400 mm - Table size: 850 x 325 mm - Speed range: 0 - 5000 rpm - Spindle mount: SK 40 - Rapid traverse: 12 m/min - WZ changer: 12-speed - Tool holder: 40 SK - Tool weight max.: 5 kg - Tool length max.: 220 mm - Tool Ø max.: 63 mm - Control: Sinumerik 810 M - Switch-on hours: 40484 h - Total power: 15 kW - Machine weight: 3200 kg - Dimensions (W x D x H): 2.4 x 2.3 x 2.45 m - Condition: good, ready for immediate use Details one tool station is currently defective, nice compact machine, can be used immediately Accessories HILMA SM 125 machine vice, various recordings in the magazine, documentation, machine feet
Vertical machining center, very good condition, electrified to visit, with many accessories Control : Sinumerik 810D with Shopmill, Procedure: X-420mm, Y-330, Z-240, Table: 850x325mm Spindle: SK40, 0 - 5000 rpm, 100Nm Feed rate: up to 12000 mm/min ATC : 12 Pos. Dimensions: 230 x 240 x 245 cm , Weight : 2900kg incl. : 2 machine vices, 30 holders, 3D probe, tool cabinet with clamping tools, milling cutter,
Control Siemens 810 D with shopmill Travel X/Y/Z 420/330/240 mm Speed 5000 1/min Tool magazine for 12 tools SK 40 Table surface 850x325 mm Weight 2900 kg ...
x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 650 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS SINUMERIK 820 D total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,43 x 1,76 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 420 mm y-travel: 330 mm z-travel: 250 mm table surface area: 850 x 325 mm spindle taper: SK 40 spindle turning speed range: 0 - 5000 U/min power feed x/y/z: 6000/6000/8800 N rapid traverse: 12 m/min ATC: 12 Pos tool diameter: max. 63 mm tool length - max.: 220 mm control: SIEMENS, ShopMill total power requirement: 15 kVA weight of the machine ca.: 2,6 t dimensions of machine L x W x H: 2,40 x 2,33 x 2,30 m Accessories: 2 hydr. vices HILMA NC 125, various tool holders, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Emco VMC 300 Vertical Machining center was manufactured in the year 2003 in Austria. It is equipped with a SIEMENS SINUMERIK control unit. ...
Description: Fabrication number: 06AL3001 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: screen is defective, therefore replacement monitor Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 1 ...
Description: Fabrication number: 06-70R Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 41 A Control system: SIEMENS SINUMERIK Tool holder: SK 40 Table dimensions: 2 x 850 x 400 mm With 2 x 3 grooves Incl. 4th axis (dividing head) With 24-position tool changer Spindle speed: 6000 rpm (not certain) Attention: without tool holders and clamping devices that may be visible in the photos Travel distances: X: 1200 mm Y: 410 mm Z: 360 mm Distance from spindle nose to table surface: 175 - 535 mm Milling spindle: Spindle bearing: 60 mm diameter Tool holder: SK 40 Speed range: 0 - 6000 rpm Feed rate X-, Y- and Z-axis: 0.01 - 12000 mm/min Rapid traverse X-, Y- and Z-axis: 24 m/min Feed forc ...
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length: 800mm Table Width: 400mm Table load: 300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole: 100mm Length: 2.200 mm Width: 2.200 mm Height: 2.200 mm& ...
Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id 4416 MAKE EMCO Austria TYPE FB-5 YEAR 2002 SPECIFICATIONS X Axis mm 600 Z Axis 400 Y Axis mm 400 Table size 800 x 400 Table load Kg 400 Spindle taper Sk 40 Spindle rpm 3150 DIMENSIONS Length 2200 mm Width 2200 ...