1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Counter ...

Used lathe Internal machine number m3533 Manufacturer: Colchester Type Triumph 2000 Ma.Number 36658 Center width 750 mm Center height 190 mm Spindle bore 54 mm Speeds 25 to 2,000 rpm. Weight approx. 1,200 kg With cabinet and accessories Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and ha ...

Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: Colchester, lead and pull spindle lathe type Triumph 2000 -Turning length: 1300 mm -Swivel Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Description: Spindle bore: Ø54 mm Nose type: D1 6 in Camlock Morse taper: No. 4 Morse No. Spindle speeds: 16 ANILAM WIZARD 411 digital readout Drehlänge: 1,250 mm, turning diameter over bed: 390 mm, turning diameter over slide: 240 mm, turning speed range: 25 - 2000 rpm, total power requirement: 5.5 kW, weight approx.: 2450 Approx. Onsite kg, Approx. Onsite Dimension. (l x w x h): 2,450 x 1,000 x 1,600 mm

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Gap Bed Machine Distance between centers: 30″ / 762 mm Swing over bed: 15″ / 381 mm Swing over cross-slide: 9″ / 228 mm Spindle speeds: 25 to 2000 (16) Spindle bore: 2″ / 50 mm clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Tool post with holders New 3 jaw chuck 2 Axis DRO system ( OPTIONAL at an extra cost ) Main motor: 7.5 hp Total horsepower: 7.55 hp Coolant

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Dia ...

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Description: CENTRES Height: 195 mm Admits Between: 1250 mm SWING Over Bed: 400 mm Over Cross Slide: 246 mm In Gap: 585 mm Width in Front of Faceplate: 165 mm SPINDLE Bored to Pass: 54 mm Nose Type: D1-6” Camlock Morse Taper in Bush: 165 mm Speeds: Selected in Three Ranges: 15-300, 35-830, 110-2500 rev/min MOTOR (MAIN) Power: 7.5 kW (10 hp) BED Width of Ways: 318 mm Type of Ways: Vee and Flat CROSS-SLIDE Width and Length: 180 mm x 850 mm Travel: 250 mm TOP-SLIDE Width: 100 mm Travel: 130 mm Tool Selection: 25 x 25 mm Quick Change Tooling: Dickson No. 2BE TAILSTOCK Quill Diameter: 73 mm Travel: 140 mm Morse Taper: No. 4 MT Set Over: ±10 mm LEADSCREW  ...