91 offers adhesive binders WOHLENBERG

found in all categories

Category: 819 presses: accessories and spare parts
approved
dealer
New in: used
Location: Land-ch CH
Seller: MJS-LINE GmbH

Format (cm): 90

Category: 102 lathes
approved
dealer
New in: used
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

turning diameter: 1070 mm turning length: 4000 mm control: Siemens type: 810 T turning diameter over slide: 700 mm spindle passage: 104 mm bed width: 710 mm turning speeds: 3,55-710 U/min max. workpiece weight between centres: 5000 kg steady: 500 mm Holder Multifix: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 831 post press: cutters and guillotines
New in: 1995
Location: Land-de DE
Seller: Bavarian graphics

Wohlenberg 92 MCS-2 TV Built: 1995 MCS-2TV version, monitor, Air table, 2x side tables with air, Replacement knife. -> one of the last machines built in the MCS series.

Category: 102 lathes
approved
dealer
New in: 1967
Location: Country-de Germany, 32257 Bünde
Seller: Plum & Partner Werkzeugmaschinen GmbH

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 5100 mm centre height: 500 mm face slide travel: 480 mm upper slide travel: 250 mm spindle bore: 82 mm spindle head: DIN 55022 Gr. 11 feeds - longitudinal: 0,063 - 140 mm/U feeds - cross: 0,032 - 71 mm/U rapid travel - longitudinal/face: 4,2 / 2,1 m/min thread - mm pitch: 0,25 - 560 mm thread - module: 0,063 - 140 thread - inch: 112 - 1/20 Gg/ max. workpiece weight between centres: 4000 kg tailstock quill diameter: 140 mm tailstock quill stroke: 315 mm Dimensions (L/W/H): 8000x1500x1600 mm spindle turning speed range: 3,55 - 710 U/min total power requirement: 22 Kw weight of the machine ca.: 9,3 t Con ...

Category: 831 post press: cutters and guillotines
approved
dealer
New in: used
Location: Land-de DE
Seller: AGM Graphische Maschinen

With Baumann Lifters NUP 650 (M-No.51.978) Year circa 1989

Category: 102 lathes
approved
dealer
New in: 1993
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

turning diameter over bed: 1000 mm turning diameter over slide rest: 780 mm turning length: 5600 mm turning dia. in gap: 1120 mm length of gap: 560 mm spindle passage: 102 mm turning speeds: 4,5-900 U/min powered upper support: faceplate: 700 mm digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 2001
Location: Land-de DE
Seller: AGM Graphische Maschinen

With Knorr Jogger RLA-3P

Category: 101 boring mills and machining centers
approved
dealer
New in: 1971
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 831 post press: cutters and guillotines
New in: 1991
Location: Land-de DE
Seller: MKS Maschinen Handels GmbH

Digital program Monitor Photo cells Air table 3 spare blades

Category: 102 lathes
approved
dealer
New in: used
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

turning diameter: 1070 mm turning length: 8500 mm control: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mm speed: 1,12 - 1120 m/min voltage: 480 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
New in: new
Location: Land-de DE
Seller: SFT GmbH Tiefbohrzentrum

Manufacture: Wohlenberg Drilling method: BTA Drilling range solid drilling diameters 25-125 mm Max drilling depth 3000 mm

Category: 102 lathes
approved
dealer
New in: 1972
Location: Country-de Germany, 47877 Willich - Neersen
Seller: Markus Hirsch GmbH

turning diameter over bed: 1340 mm turning diameter over slide rest: 750 mm turning length: 4000 mm turning speeds: 1,4-280 U/min digital readout: Acurite : steady: 640 steady: 500 faceplate: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 831 post press: cutters and guillotines
approved
dealer
New in: used
Price 8.000 €
Location: Land-bg BG
Seller: Graphotrade Ltd

air cells programmes in production

Category: 102 lathes
approved
dealer
New in: 1965
Location: Country-DE Germany, 63303 Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 3250 mm center height over bed: 500 mm centre distance: 3250 mm spindle bore: 104 mm turning speed range: 1,8 - 355 U/min quick change toolholder: MULTIFIX taper in tailstock-quill: MK 6 coolant: voltage: 380 V total power requirement: 30 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 6,00 x 2,00 m - rapid traverse - coolant equipment - faceplate Ø 1000 mm - quick cange tool holder MULTIFIX with around 8 stakes - 2 fixed steady Ø 450 and 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 831 post press: cutters and guillotines
New in: 1990
Location: Land-es ES
Seller: ICD

Digital program Central air table Side tables with air Light guards Under power, ready for test Available immediately

Category: 101 boring mills and machining centers
approved
dealer
New in: 1978
Location: Country-DE Germany, 40789 Monheim am Rhein
Seller: Kemmerich Werkzeugmaschinen GmbH

core drilling diameter max.: 630 mm bore depth: 12000 mm swing diameter: 1600 mm max. workpiece diameter: 1600 mm center height over bed: 800 mm core boring: min. 50 mm Capacity: 100 - 1300 l/min main drive DC: 160 kW Torque: 50000 Nm coolant pump: 32 kW boring spindle drive: 110 kW bed width: 1000 mm full boring: 20 - 160/400 mm borehole diameter: 630 mm bore feed range: 3 - 3000 mm/min rapid adjustment: 3000 mm spindle speeds: 1,8 - 355 mm spindle bore: 163 mm speeds of tool: 5,6 - 560 U/min workpiece weight: 40000 kg max.workpiece weight:each extra steadyrest: 50000 / 63000 kg passage of steadyrest: 100 - 560 / 500 - 1250 mm bed length: mm electrics - voltage/frequency: 400 / 50 V/Hz tota ...

Category: 833 post press: gatherers
approved
dealer
New in: 1989
Location: Land-de DE
Seller: TMP Meurer Industry & Consult GmbH

Collator Wohlenberg Type 370 Year 1989 - 20 stations - Criss-cross delivery - sheet control Optigraf Year 1996

Category: 102 lathes
approved
dealer
New in: 1972
Location: Country-de Germany, 77815 Bühl-Weitenung
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

turning diameter over bed: 860 mm turning diameter over slide rest: 545 mm turning length: 12000 mm centre height: 425 mm spindle bore: 104 mm turning speed range: 4,5 - 900 U/min feeds - longitudinal: 0,1 - 140 mm/U feeds - cross: 0,05 - 71 mm/U thread - mm pitch: 0,4 - 560 mm thread - module: 0,1 - 140 thread - inch: 70 - 1/20 Gang/ max. workpiece weight between centres: 4000 kg workpiece weight in steadies max.: 6300 kg radial face slide travel: 480 mm : 250 mm spindle head: DIN 55022 Gr. 11 tailstock quill diameter: 140 mm tailstock quill stroke: 315 mm tailstock taper MT: 6 total power requirement: 30 kW weight of the machine ca.: 23,0 t range L-W-H: 15,50 x 1,80 x 1,90 m acc.: faceplat ...

Category: 831 post press: cutters and guillotines
New in: 1998
Price 6.998 €
Location: Land-de DE
Seller: Michael Niepert

with 2 large side tables with air, spare knives, knife change tool, manual, wiring diagrams, monitor change by 2015, demonstration ready in our Hall Video clip on request

Category: 102 lathes
approved
dealer
New in: 1985
Location: Country-de Germany, 77815 Bühl-Weitenung
Seller: Hans Klein Werkzeugmaschinen-Handel GmbH

turning diameter over bed: 1000 mm turning diameter over slide rest: 770 mm turning length: 3000 mm centre height: 500 mm face slide travel: 480 mm upper slide travel: 250 mm spindle bore: 104 mm spindle head: DIN 55022 Gr. 11 spindle turning speed range: 4,5 - 900 U/min feeds - longitudinal: 0,063 - 140 mm/U feeds - cross: 0,032 - 71 mm/U rapid travel - longitudinal/face: 4,2 / 2,1 m/min thread - mm pitch: 0,25 - 560 mm thread - module: 0,0625 - 140 thread - inch: 112 - 1/20 Gg/ max. workpiece weight between centres: 5000 kg max. workpiece weight -without tailstock: 1800 kg tailstock quill diameter: 140 mm tailstock quill stroke: 315 mm steady for max. workpiece diameter from: 465 mm total  ...

Category: 831 post press: cutters and guillotines
approved
dealer
New in: used
Location: Land-de DE
Seller: AGM Graphische Maschinen

Size: 76 cm

Category: 102 lathes
approved
dealer
New in: 1987
Location: Country-DE Germany, 51149 Köln
Seller: AS Maschinenhandel

turning diameter: 1040 mm turning length: 5000 mm chuck: 400 mm faceplate: 1000 mm steady: 3 Stk. swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 102 lathes
approved
dealer
New in: used
Location: Land-de DE
Seller: Maschinenbörse MV GmbH

Manufacturer: Wohlenberg Hannover Type: E800V Weight: 10 tons Centre distance: 7000 mm Tip height: 520 mm After bath collection: 670 mm Spindle passage: 80 mm Rapid traverse rate and four-way Toolpost machine dimensions (Lxwxh): 9500 mm x 1500 mm x 1700 mm

Category: 102 lathes
New in: 1996
Location: Country-de Germany, 49779 Niederlangen
Seller: Heinz Sanders GmbH

turning diameter over bed:1000 mm turning diameter over slide rest:760 mm turning length:4000 mm workpiece weight:max. 5000 kg center height over bed:500 mm spindle bore:115 mm turning speed range:4,5 - 900 U/min quill stroke:315 mm pinole diameter:140 mm faceplate diameter:1000 mm adjustment of upper support:250 mm feeds longitudinal slide:0,063 - 140 mm/U feeds of cross-slide:0,032 - 71 mm/min total power requirement:-- kW weight of the machine ca.:16 t dimensions of the machine ca.:6,0 x 2,0 x 2,3 m equipments: - Heidehain length measuring system renewed - Cabinet renewed - CNC control Power Automation ICE1131 2016 installed - Bezel - tailstock - 3-jaw chuck - Operating manual The machine ...

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1988
Location: Land-nl NL
Seller: ITK Graphic Machinery

Guillotine Wohlenberg Model 92 MCS2TV Year 1988 Cutting length 920 mm Details Air table Large air tables left + right (2x750x1000mm) Photo cells Digital Program MCS with monitor Available direct

Category: 102 lathes
New in: 1986
Location: Land-de DE
Seller: Erdmann Export-Import

Make: WOHLENBERG Type of machine: VDF U900S CNC Cutting diameter: 900 mm Turning length: 4300 mm Drive power: kW 40 Turning diameter: 900 mm Rotating diameter over saddle: 530 mm

Category: 836 post press: other
approved
dealer
New in: 1975
Location: Land-de DE
Seller: YUKE

Automatic 3 knife trimmer. Max size: 300x430mm, Min size: 50 x 80,. Thicknes: 120mm, Speed max: cuts/min 25

Category: 102 lathes
New in: 1986
Location: Land-de DE
Seller: Erdmann Export-Import

Make: WOHLENBERG Year of manufacture: 1986 Type of machine: VDF U1070S CNC Cutting diameter: 1070 mm Turning length: 4300 mm Turning diameter: 1070 mm spindel speed: 3.55-710 umin- Rotating diameter over saddle: 710 mm

Category: 831 post press: cutters and guillotines
New in: 1998
Price 10.000 €
Location: Land-ua UA
Seller: 4print

Programmable Light Barrier Airtable Side air tables

Category: 831 post press: cutters and guillotines
New in: 1985
Location: Land-de DE
Seller: PANGRAPHIC GMBH

STANDARD-EQUIPPED

Category: 102 lathes
New in: used
Price 35.000 €
Location: Land-de DE
Seller: EN-Tec GmbH

Turning diameter 1000 mm Turning length 4000 mm Speed 25-315 Tailstock Bezel/insert stock Reconditioned Changes and errors in the technical data and information and subject to prior sale!

Category: 831 post press: cutters and guillotines
New in: 2000
Location: Land-de DE
Seller: PANGRAPHIC GMBH

EXCELLENT-CONDITION! 1 Knife inside machine 6 spare-knifes will also be delivered with the machine!

Category: 832 post press: folders
New in: used
Location: Land-de DE
Seller: Herr thienlan

Different folders, Binder, cutting... Knife accessories cheap for sale. Tel 015254306961

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1975
Location: Land-ch CH
Seller: MJS-LINE GmbH

Age : around 1975 Format (cm): 90 Equipment / Additional information: side tables, safety barrier, air table, reserve knife

Category: 831 post press: cutters and guillotines
approved
dealer
New in: used
Location: Land-de DE
Seller: AGM Graphische Maschinen

Machine no. 3371-014

Category: 831 post press: cutters and guillotines
New in: 1999
Location: Land-pl PL
Seller: TOP GRAPHIC MACHINERY

Guillotine Wohlenberg 115 ref 1969EU Year-1999 Air table Computer

Category: 831 post press: cutters and guillotines
New in: 1986
Location: Land-de DE
Seller: Wira Grafik GmbH

Wohlenberg 137 MCS-3 TV Age: 1986 Serial: 3245-005 Program Air table Vibrating table Unloader Very good condition

Category: 102 lathes
approved
dealer
New in: used
Location: Land-de DE
Seller: Schrenk Werkzeugmaschinen

Top width 1500 mm Diameter over bed 800 mm Support diameter 480 mm Spindle bore 100 mm . Speeds of 1.8-800 RPM 22 kW . Length x depth approx. 5.3 m x 2 m Machine weight approx. 9.7 to . Accessories and additional data as per offer. ...................................................................... ................... .

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 2000
Location: Land-de DE
Seller: Druck & Technik

Manufacturer: Wohlenberg Type: Digicut 61 Year of construction: 2000 Size: 61 cm equipment: Light barrier, rear table cover, program, 1 spare knive, tools, documentation

Category: 102 lathes
approved
dealer
New in: 2008
Location: Land-de DE
Seller: CBW Böhmer Werkzeugmaschinen

1 x lathe used manufacturer: LÃ?W-Wohlenberg Type: W 570 Year of construction: 2008 Machine was never in use machine type: W570 Umlauf-Ã? above bed: 570 mm Umlauf-Ã? a.s.l. sled: 360mm top width: 1000 mm Spindle bore: 63 mm Power: 11kW Torque: 1600Nm Speed range: 11.2-2240 Rev/min Feed range: 0.05 â?? 3, 5 mm Thread range: 0.5-112 mm Advantages: high-precision TIMKEN-camp, 24 speeds with large speed range, ball screws instead of trapezoidal spindle (Z axis), large feeder and thread area, joystick for feed, driven to upper support, rapid traverse in all axes.

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1995
Location: Land-hr HR
Seller: Astrographic D.O.O.

Wohlenberg 115 Age: 1995 Air table Computer Two side tables Machine in excelent condition Free of damages. Available: immediately

Category: 102 lathes
approved
dealer
New in: used
Price 12.800 €
Location: Land-de DE
Seller: CBW Böhmer Werkzeugmaschinen

1 new lathe (never used) from Bundeswehr stocks manufacturer: Löw Wohlenberg Type: W-490 Year of manufacture 2008 top width: 1000 mm Turning diameter: 490 mm Swing over cross slide plan: 280 mm Spindle bore: 63 mm Spindle speed: 11.2 2240U/min Main drive: 11kW Accessories: 1 x, 1 x faceplate 1-bezel, 1 mitlaufende bezel, Multifix with inserts, chip tray, coolant system with pump, machine light and various tools benefits: high-precision TIMKEN-Commons, 24 speeds with large speed range, large feeder and thread cutting area, joystick for feed, driven upper support, rapid traverse in all axes Ball screws instead of trapezoidal spindle (Z-axis) stable, modern design, accesso ...

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1992
Location: Land-fr FR
Seller: SOLUTION GRAPHIQUE FRANCE

Air table 2 side tables 2 knives Photo cells Program Machine complete in good working conditions.

Category: 834 post press: perfect binders
New in: 1997
Location: Land-it IT
Seller: Alcon SRL

Year 1987 – Trilateral Complete with manual and accessories

Category: 831 post press: cutters and guillotines
New in: 1987
Location: Land-rs RS
Seller: STAMPAIPAPIR DOO

Guillotine Wohlenberg 155 MCS TV, Age: 1986-8, cutting width 1550 mm, photo cells, program, monitor, airtable, 2x side tables with air, spare knife, manuals and tools. Very good condition ! Immediately available !

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1991
Location: Country-DE Germany, 56428 Montabaur
Seller: TMP Meurer Industry & Consult GmbH

Silicone spray system 1 feeder belt 2.50 m

Category: 831 post press: cutters and guillotines
approved
dealer
New in: used
Location: Land-de DE
Seller: Annan Graphische Maschinen GmbH

Papierschneidemaschine Wohlenberg 115, Maschine ist Nachgerüstet mit Cut Programmsteuerung, Lichtschranken, Lufttische,

Category: 834 post press: perfect binders
approved
dealer
New in: 1987
Location: Country-de Germany, 90411 Nürnberg
Seller: F1-TRADE GmbH

Three Knife Trimmer Wohlenberg 44 FM 50 Year 1987 - Serial-No. 3002-004 -Available Immediately - -can be inspect- -in production - can be test-

Category: 834 post press: perfect binders
approved
dealer
New in: 1987
Location: Country-de Germany, 90411 Nürnberg
Seller: F1-TRADE GmbH

Perfect Binding Line Wohlenberg Golf 18 Year 1987 - Serial-No. 71928 Gathering machine Wohlenberg ZTM 460 12 Stations book block feeders with handfeeding station Double and missing control Connection unit as transfer channel to the binder Size area min.75x105mm - max. 320x460mm Speed mech. max. 7.000 clocks/h Material area 70gr. single sheet till 64-page sheet collecting duct width max. 80mm Wohlenberg Golf 18 - 18 Clamps Milling station Hotmelt spine glue and hotmelt side glue Colt melt glue Hand feeding station Pre melter 2 pressing units Autom. cover feeder Laydown delivery Conveyors belt Stacker Wohlenberg ZS /12 Serial-No. 3125/0.13 Three Knife Trimmer Wohl ...

Category: 831 post press: cutters and guillotines
approved
dealer
New in: 1989
Location: Country-de Germany, 90411 Nürnberg
Seller: F1-TRADE GmbH

Guillotine Wohlenberg 155 MCS-3 TV Year 1989 - Serial-No. 3336-003 cutting width 1550mm programm - Monitor chrome table air bed extra knife manuals -Available Immediately - -can be inspect- -on stock -

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)