used VIEBAHN Embossing machines

4 Stations plastic compression machine. Thermosetting The machine is located in Portugal.

Hacksaw with roller block and saw blades

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 * 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and  ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 * 600 mm, pressing surface approx. 150 * 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 45*45 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and tempera ...

Laboratory Press EHSP125 - Demonstration Machine Table press / electric spindle press with pressing pressure 20 KN (2 tons). Press drive with screw jack, reduction ratio 1 : 12, spindle diameter 32 mm, pitch 6 mm, pressing surface approx. 100 * 100 mm, clear height and stroke approx. 300 mm. Gear motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max dynamic load 20 kN. With reversible control, emergency stop and motor protection plug. Sturdy steel press frame. Base table made of high-quality aluminum profiles 45*45 mm, table surface 600 * 600 mm, table top made of multiplex top. Total weight approx. 100 kg. The table press has 20 kN pressing pressure (dynamic load). Typical applications are pressing work with exact delivery. Suitable for pressing bonding, embossing and impressions. The screw jack has a twist protection so that th ...

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3637 Year 1986Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever press make GARANT type 150378Pressing force: 1.0 tRam diameter: 40 mmStroke max. 350 mmDischarge: 260 mmTable diameter: 210 mmOutside dimensions approx: 530 x 200 x 750 mmWith- UnderframeusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMachine -No: 3657Press force: 6 tStroke adjustable: 0 - 25 mmOperating pressure: 8 barProjection: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:UsedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic toggle press make SCHLING type UNI 3 PNKMasch. -No: 3562Technical specifications:Pressing force: 6.0 tStroke adjustable: 0 - 25 mmOperating pressure: 8.0 barThroat: 100 mmTable size: 200 x 160 mmDimensions: 300 x 200 x 850 mm:usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

Electric surface press REITZ EHSP522 Pressing surface 200*200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

in 2005 refurbished Still in operation: Yes Available: immediately

in 2005 general overhauled Still in operation: Yes Available: sofort

Praege machine Hydrualic press NULL for rounds of 35 mm For sale comes from a stock release a used but well preserved fully functional punch or praegepress. Steel rounds were used with this machine. max. round diameter: 35 mm incl. various stamps: A22 / A34 / A41 / A43 / A50 / A60 Drop height: 920 mm with hydraulic unit Machine comes from a warehouse breakdown of a large German industrial group and was accordingly equipped with UVV compliant. Space requirement LxWxH: 1000 x 900 x 1400 mm Weight: 335 kg Price is understood plus VAT free loaded warehouse Giessen Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 6753

Foil stamping - embossing Kolbus Model PA Year 1963 Size of the plate 380 x 450 mm Space between columns 640 mm Pressure 40 tons Condition machine can be bought not working "as-is" or fully refurbished Available direct or 3 month

Max. hydraulic pressure: 400bar.

Max. roll diameter: 500mm, track width: 320mm, speed: 250 prints/min, max. printing width: 300mm, max. printing length: 300mm, including winder and unwinder, without track inspection and edge controls.

Working width: 25-210mm, embossing force: 100kN, heating output: 2200W.

An inspection is possible.

Web width 1020mm. Un- and rewind dia. 1000 mm 2 steel embossing rollers with different designs 2 paper pressure rollers Year 1988 In excellent condition

pressure: 360 t stroke: max 60 mm table surface area: 525x430 mm no. of strokes: 60 Hub/min : 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Otto Hänsel Model : Strada 1200 - candy embossing line for solid candies without filling, composed of: 1x Ruffinatti Flavour Mixer 1x strand former type HKR 2304 1x extrusion machine type HZU 2606 1x Embossing machine type UP 2905 with 4x embossing inserts 1x Euromec cooling channel with new belt 1x compressor and evaporator for cooling channel We offer this machine for sale "as is" to the exclusion of any warranty/warranty claims or representations. from the location Northern Europe; Unpacked