We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
used
unused machine. Was set up at the customer's site at the end of 2021, some samples were run and then the machine was never used again. Extruder 70/24D, single head, nozzle up to 120 mm. B&R control. All movements proportionally controlled. With waste and bottle conveyor. Optional moulds for 1-tr and 0.5 litre round bottles available
used
MACHINE IS ONLY TESTED, DEMO AND IT IS AS BRAND NEW CONDITION. OLEASE LET US KNOW ABOUT YOUR PRODUCT AND WE WILL TELL YOU IF THIS MACHINE WILL FITS FOR YOURS PRODUCTS. MACHINE IS AWAILIBLE IMEDIATELY. WE ORGANIZE DISMANTLING LOADING TRANSPORT WE CAN ORGANIZE WITH FULL RISK INSURANCE FOR THE CUSTOMER.
used
Container Size With Actual Configuration: 1 // Number Of Heads: 2
used
Container Size With Actual Configuration: 19 l // Number Of Heads: 1
used
Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...
used
Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English
used
accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice
used
Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available
used
Extrusion blow molding machine for polyethylene and/or polypropylene containers up to 1 liter capacity. Spindle diameter 48 L/D 24 A station. W. MÃLLER single outlet head with thickness regulator. Automatic deburring. Ordered delivery by extraction clamp on conveyor. Integrated pore checker. Incandescent cut.
used
1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.
used
1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
used
Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition
used
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2*150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
used
- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2*250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000
used
Manufacturer Bekum Machine type BM303D Station Double station Construction year 1989 Place Europe Closing force 50 kN Control Siemens Parison Control | WBK 30 Points WBK Extruder 70/20D Shape dimension in mm (Length x width x height) 400/300/ 2*100 Parison Head 3BKSV30 Max bottle volume 3 lit Machine weight (kg) 6 t Monitour language German
used
Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new
used
Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used
used
Used, well-preserved set of barrel / screw
Hose head with WDS. Nozzle up to 120 mm. Available from stock
used
various blow molds available from stock. More information on request
used
Used molds, in good condition. Available ex stock
used
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No