used UNGERER Sheet metal blowroom machines

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

Sheet metal straightening machine make UNGERER type RM 300/2/23Machine -No: 5507 built in 1961Material width: 300 mmMaterial thickness: 2.0 mmNumber of Straightening Rollers: 25Standard roll diameter: 23 mmWeight approx: 2 tExternal dimensions: 200 x 900 x 1700 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Ungerer leveler Used machine visible in Italy, sold as it is

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Qty. 1 Second-hand cut-to-length line Mfc.: Ungerer Built: 1966 Material: Stainless steel Strip Width: 300 mm- 1500 mm Thickness: 1.5 mm (stainless steel) Cut length: 750 mm- 6000 mm Length adjustment: mechanical Coil weight: 9.000 kg Coil min/max inner Ø: 500 & 600 mm Shear Type: Rotary Hydraulic system Stacker capacity: 2000 ton PLC: Allen Bradley Scope of supply: Decoiler Crop shear Edge trimmer Leveller PVC film applicator Stacker Camera system

material width: 1650 mm material thickness: 2,00 mm no. of straightening rolls: 23 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 53,60 mm straight. rolls-needle bearings: ja / yes between stands ca.: 1750 mm barrel length ca.: 1820 mm straight. speed ca.: m/ min total power requirement: 58 kW weight of the machine ca.: 19,60 t dimensions of the machine ca.: 6,00 x 3,00 x 2,90 m Number - supports 14 (7 x above/7 x below) with support rollers Number - support rollers 174 ( 84 x above / 91 x below) Support roller dia. approx. 112mm Drive power - main drive 55 kW Motorized height adjustment Electromotive tipping device Crowning (support adjustment (below) mechanical/manual) and individually deliverable 1 set of straightening rollers (replacement rollers) diam. 53.68mm Central grease lubrication of the straightening rollers bearing rails Circulating oil lubrication of gears and card ...

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 2500 mm, 16 mm

Machine type: sheet leveller Stock number: 0997 Make: WMW GOTHA Type: UBR 16 x 2500 /1-10 Year of construction: 1976 Sheet width: 2500 mm Sheet thickness: 16 mm Smallest sheet thickness: 6 mm Number of straightening rollers: 11 Roller diameter: 180 mm Straightening roller diameter: 180 mm Target speed: 10-16-20 m/min Flow speed: 10 m/min Total power requirement: 75 kW Machine weight approx.: 46 t

Aluminum tear plate, aluminum checker plate, checker plate, checker plate -Material: aluminum -Dimensions: 1500 x 2160 mm -Sheet thickness: 2.5 mm -Tear thickness: 4.0 mm -Number: 30 pieces of checkered plate available -Price: per piece -Weight: 24 kg/piece

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

We offer you here a sheet metal cleaning machine from Jeros, for plates 60x80. If you have any questions or questions, we are happy to provide you with Delivery at an additional cost possible

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: “ZR – 23M – 31”, reversing “Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Punching nibbling machine

Type: RWM 800 For boxes 600x800 mm Capacity: 500 pcs/h For self-disassembly in 62118 Monchy le Preux, France

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

Baking sheet Cleaning maschie sheet metal plastering machine Ullmann -for sheet metal 60x40cm edges on the short side -for sheets 58x78cm edges on the long side -400 volts

Baking sheet plastering machine KD plaster 100 era -suitable for sheets 98cm 2 edge -Baking sheets 58x98cm -with mobile base -with oiling -400 volts

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Forming capacities Steel 2 mm Light metal 2.5 mm Stainless steel 1.5 Extension 340 mm Installation height 192 mm Working stroke 25 mm Working cycles 400 p/min. Tiltable 0 - 15o accessories: - 1 pc. tool Engine power 1.5 kW Country of origin Switzerland Machine Weight 330 kg Dimensions LxWxH 120 x 60 x 170 cm