We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date
Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa
used
Machine in good technical condition, currently disconnected. Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet cutting thickness: 1 mm Total power consumption: 22 kVA Machine weight: 11.5 t
new
Code: N0200 Brand: TOMAR Model: COMO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 450 Max distance between uprights mm 3150 Length of arms per side mm 700 Useful gap between arms mm 120 N° 22 Pvc-coated shelves Load capacity kg 300 N° 4 swivel wheels for handling (2 with blocking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 750 x 1900 h - Trolley max opening mm 1500 x 3350 x 1900 h Overall dimensions for transport: mm 1500 x 750 x 1900 h Weight kg 115
used
Control Fanuc 18 TB Turning diameter 165 mm Turning length: 200 mm X-axis 2x195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001 degr. Turning speeds: 50-5000 U/min Tool turret with 12 work positions 2x12 Chip conveyor INCLUDED Bar feeder Hatec can be purchased separately (please inquire) 2 Units available for sale!
used
USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent
used
Inv. Num. : 5431 Type: HNTA 3150/10 Producer: Tomášek Created: 2015 Parameters: Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet thickness when cutting: 1 mm Total power requirement: 22 kVA Machine weight: 11.5 t
used
Description: Max. panel width 3200 mm Max. panel length 1300 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cups Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Max. panel width 1300 mm Max. panel length 3500 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cups Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg
used
Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg
used
Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg
used
Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm
used
year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...
used
Crank press SMERAL LKT 250A
new
SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024* Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new * refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table ...
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg
used
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
used
The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.
used
The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.
used
This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.
used
pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled *new painting *new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
used
Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T