used SCHENCK Balancing Machines

The machine is in good general condition and is equipped with the following accessories. 1 set of racks with castors 1 set of bearing stands with prisms 1 piece test rotor Various spare parts Operating instructions with spare parts list Price on request

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 300 kg workpiece length: 1500 mm dia. on complete length: 450 / 1280 mm electrics - voltage/frequency: 400 / 50 V/Hz balancing speed variable: U/min Control: CAB 700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 30 kg workpiece length: 150 mm dia. on complete length: 500 mm electrics - voltage/frequency: 400/50 V/Hz balancing speed variable: 600-1000 U/min Control: CAB 870 Overall size: 2,7x1,2x1,8 mm weight of the machine ca.: 2,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Workpiece weight 7.5-35 kg Workpiece length 300 - 750 mm Diameter 190 mm Balancing speed adjustable 400 rpm Rated current 16 A weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,500 x 2,100 mm

complete unit with cardan shaft comes from a vibrancy sieve

excitation force: 114 kN Motor power approx. 5.5 kW

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

Size: 2.000 x 5.500 mm - Deck: 0,8 mm Stainless steel screen deck - Included: Electrical Motor and springs

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

* General * SKU231U215 * LocationBarneveld * MakeSchenck * TypeMechaTron * Main Features * MaterialStainless steel * Motor0.75 KW * Inlet diameter200 mm * Specified Features - Metering screw * Metering screwcheck * Screw diameter60 mm * Pitch52 mm * Shaft diameter32 mm * Screw length740 mm * With hoppercheck * Capacity380 Ltr. * Hopper sizesdia. 845x940 mm * InletDN150, DN200 * OutletDN150 * With motor0,75 kW 230/400 Volt * Without controlcheck * Screw speed1375 rpm * With vibro motor0,37 kW 230/400 Volt * Metering screws * MaterialStainless steel * Information * Year of construction2007 * Floorspace1,1x1,2 m * Total height1,7 m * Weight400 kgMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

* General * SKU231U213 * LocationBarneveld * MakeSchenck * TypeMechaTron * No.V061565B01 * Year of construction2007 * Main Features * MaterialStainless steel * Length570 mm * Width115 mm * Specified Features - Vibro feeder * MaterialStainless steel * Vibro feedercheck * Feeder width115 mm * Feeder length570 mm * Feeder height55 mm * Closedcheck * With hoppercheck (380 Ltr.) * InletDN150, DN200 * OutletDN150 * With vibro motorcheck (JVM type: JD 40) * Without controlscheck * Information * Total height1.6 m * Weight170 kg * CEcheck * Floorspace0.8x0.7 mVibro feedersSchenckConveying systems > Vibro feedersBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...

* General * SKU231U214 * LocationBarneveld * MakeSchenck * TypeMechaTron * Main Features * MaterialStainless steel * Motor0.75 KW * Inlet diameter200 mm * Specified Features - Metering screw * MaterialStainless steel * Metering screws * Metering screwcheck * Screw diameter60 mm * Pitch52 mm * Shaft diameter32 mm * Screw length740 mm * With hoppercheck * Capacity380 Ltr. * Hopper sizesdia. 845x940 mm * InletDN150, DN200 * OutletDN150 * With motor0,75 kW 230/400 Volt * Without controlcheck * Screw speed1375 rpm * With vibro motor0,37 kW 230/400 Volt * Information * Year of construction2007 * Floorspace1,1x1,2 m * Total height1,7 m * Weight400 kgMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

* General * SKU221M092 * LocationBarneveld * MakeSchenck * TypePHS 2 AVRZ * No.1 FRH 3320 * Year of construction1990 * Main Features * MaterialStainless steel * Inlet diameter20 mm * Specified Features - Metering screw * MaterialStainless steel * Metering screws * Metering screwcheck * Screw diameter20 mm * Screw length± 200mm * With hoppercheck * Hopper sizesdia. 400x450mm * Inlet2x dia. 100mm * Outletdia. 45mm * With DC motorcheck * Without controlcheck * With breaking/mixing shaftin hopper * Motor0,09 KW, 220/380 Volt * Information * Floorspace0,8x0,5 M * Total height0,9 M * Weight100 KG * Extra SpecificationsWithout controlsMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

Inv. Num. : 7512 Type: H 30 BU Producer: SCHENCK Created: 1994 Parameters: Maximum load capacity: 700 kg Max. speed: 2300 1/min Maximum distance between tailstock tips: 1330 mm

Force-measuring dynamic balancing machine make Dr. REUTLINGER type HK 12 LBMachine -No: 5.212.070 built in 1985Technical data:Workpiece weight: 1-100 kgDG 2 and 2.3 x 10 to the power of 6Center height: 340 mmhorizontal adjustment of the recording: 800 mmExternal dimensions approx.: 1800 x 1000 x 1450 mmwith- Measuring device K 2700- Computer MC 100 with screen- removable coverlittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Vibration measurement - Balancing in one level - Balancing in two levels - Iterations Method - Trans-red method - Machine weight: 15 kg - Condition: very good Details well-maintained vibration measuring device

Balancing machine Capacity: 30 kg Max rotor diameter: 600 mm Balancing speed: 900 rpm Power: 1.5 kW

The CIMAT CMT 30 V2 balancing machine was manufactured in 2015 in Poland. Bvcilkrj7m Basic technical data: - software: ROTOTEST - component weight: 0.2 to 30 kg - maximum rotor diameter: 400 mm - maximum rotor height: up to 200 mm - compressed air pressure: 0.6 MPa - balancing machine dimensions: 1200 x 1200 x 1500 mm - control panel dimensions: 600 x 600 x 1800 mm - weight: 500 kg

Power consumption 140 W Pneumatic tension for tool holders SK 10 - SK 40 and HSK 32 - HSK 63 rotor diameter 270 mm rotor length 350 mm Rotor weight 0.1 – 35 kg Accessories: Adapter SK 40, HSK 50, HSK 63

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.16Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

Tire balancing machine make HAWEKA type BALCO 9460Fabr. -No: 0507.602.8007.13Technical specifications:max.wheel diameter: 950 mmmax.wheel width: 530 mmmax.wheel weight: 70 kgRim width: 76 - 510/3 - 20 mm / Measurement time:> 6 sec.Measurement speed:

Balancing machine CEMB ZE-300 / GV - new in1992 - machine weight 1.8 t, power input 1.8 kW - revolutions 200 - 2000 rpm - length of part for balancing up to 3000 mm

Balancing machine for balancing tool holders in 1 level. Accesories: 80.213.01 Software for balancing by drilling (axial) 80.245.10 Software for calculating alternative compensation positions (TDC 4.0) 80.207.10 Tool scale up to 30kg (for balancing machine) 80.230.00 Calibrator for calibrating the balancing machine TD 1002/2002/2009 80.201.E50.00 Adapter for HSK E50 with clamping system (May only be used in original Haimer Tool Dynamic!), max. tool length: 360 mm, Max. Workpiece diameter: 340 mm, max. tool weight: 15 kg, measurement accuracy: < 0.5mm, Measurement accuracy: < 1 gmm, compressed air: 6 bar, Power consumption: 0,4 kW, Power supply: 230 V / 50-60 Hz, Dimensions W x D x H =: 500 x 680 x 820 mm, mass: 200 kg, colour: black-and-white

Built-in balancing head DITTEL NS F21378 (for Junkers Jumat 50) Motoren i.O. Balancing weights have play! used, tested ! Dimensions: 160 x 90 x 90 mm