used RSA Deburring grinding machines

Brush deburring machine RSA type RASA Mono Masch. No. R.III-09/2669 Year of construction 2008 Brush diameter max. 250 mm Brush width 60 mm Brush holder 53 mm Brush speed 1500 / 3000 rpm. Motor power 2.6 / 3.1 kW Mains connection 400 volts, 50 Hz - Base with 4 oscillating elements Space requirement L x W x H 720 x 480 x 1180 mm Weight 172 kg very good condition; used

Deburring pipes, rods, profiles and sheets after separation is a must. But only the right system enables cost-effective, safe and flawless deburring – namely the optimal adaptation of the machine concept and the high-performance brush to the workpiece properties and material quality.

Specifications: - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 2.2 / 3.0 kW - Brush depth adjustment - Height adjustable support table with V recesses - Working height 900 mm - Space requirement approx. W 750 x H 1150 x D 5ß0 mm - Weight approx. 200 kg - separate dust extraction - Drive 400 V - Space requirement approx. W 650 x H 1100 x D 650 mm - Weight approx. 50 kg

Brush Deburring Machine Fabr. RSA Type STL IIIMachine -No: BIII 3-7262, built in 1986for pipes, profiles, solid material and sheetsWorkpiece diameter: UnlimitedBrush diameter: 250 mmBrush width: 60 mmOperating and protection: S 6-60% IP 44elec. Connection: 380VConnected load: 2/3 kWSpeeds by pole-changing motor Engine: 1500/3000 rpm.External dimensions: 650 x 450 x 1150 mmWeight approx: 75 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type ST-No: RG II 48-1902, year of construction 1991for pipes, profiles, solid material and sheetsTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds thanks to pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgColor greenWith- base- brushused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine, make RSA, type Rasamax MonoMasch. -No: R-M-38/3305 built in 2000Technical specifications:Material thickness from: 1 - 6 mmSheet thickness: up to 6 mmSheet width: 100 to 1,000 mmSheet length: 100 to 1,000 mmSheet shape: sheets with notches, straight cut sheetsMaterials: steel, stainless steel, NEMax. Brush diameter: 250 mmBrush speed: 1500/3000 rpm.Drive power: 1.0 / 1.4 kWPower connection: 380 V, 50 HzDimensions with base: 400 x 500 x 1300 mmWeight approx: 50 kgWith- Base cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 48-1047 / 96 built in 1996Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation, i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Deburring machine make RSA type Turnamat 2Machine -No: 048-028908 built in 2008Technical specifications:Workpiece cross-sections: 10 x 10 to 150 x 150 mm2 brush speeds: 1500/3000 rpm.Deburring time: 1 - 5 sec.Drive power: 3.5 / 4.6 kWDimensions approx .: 1200 x 1200 x 1800 mmWeight about: 550 kgsuitable for- Steel, VA, aluminum, copper and brass- Deburring by rotating the brush at high speed- Service rotation = circling the brush around the axis of rotation,i.e. continuous change of working direction at low speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Brush deburring machine make RSA type STLMachine -No: RG III 071628 built in 1990for pipes, profiles, solid material and sheet metalTechnical specifications:Workpiece diameter: unlimitedBrush diameter: 250 mmBrush width: 60 mm2 speeds through pole-changing motor: 1500/3000 rpm.electr. Connection: 380 V, 2/3 kWSpace requirement: 500 x 650 x 1200 mmWeight approx: 83 kgwith- several new replacement wire brushesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available.

Machine in good technical condition, minimally used. Robust and fast deburring for symmetrical and asymmetrical workpieces. De-needling time 1 to 5 seconds (on the front surface). Speeds rpm 1,500 + 3,000 Cross-sections mm 20 x 20 to 120 x 120, 10 x 10 to 120 x 120 Materials: steel, stainless steel, aluminum, non-ferrous metals Power: 4.9 kW Max. thread diameter: 250 mm.

Brush spindle RPM:1500 / 3000 1/min Brush diameter:250 mm max. workpiece diameter:90 mm Dimensions (L/W/H):720 x 1150 x 450 mm connected load:3,1 kVA connected load frequency:400 V

Machine number: ST-R-1660 Buerstentgratmaschine for the deburring of metal sheets or plates Power supply: 380 V 50 Hz 1.0/1.4 kW 2 speeds: 1500-3000 rpm. Brush diameter: 250 mm

plate thickness: 5,0 mm turning speed range: 1500 / 3000 U/min diameter of brush: 250 mm width of brush: 80 mm voltage: 380 Volt total power requirement: 2,4 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 700 x 460 x 1200 mm Description : RASAMAX DUO was specially developed for the fast and reliable developed for deburring straight sheet metal. The deburring machine has two counter-rotating deburring brushes that two offset levels. With this principle, upper and Lower edge of sheet metal deburred simultaneously in one operation. This means up to 50% time savings compared to other methods! RASAMAX DUO is suitable for deburring individual pieces and small series and designed with its robust construction for continuous use. Furnishing: - efficient deburring of straight sheets - for steel, stainless steel, non-ferrous metals The data for this ad was created with  ...

diameter of brush: 250 mm width of brush: 80 mm turning speed range: 1500 / 3000 U/min voltage: 380 Volt total power requirement: 2,0 / 3,0 kW weight of the machine ca.: 175 kg dimensions of the machine ca.: 800 x 400 x 1.300 mm Furnishing: - Deburring handy sheets with notches and contours - Sheet thicknesses up to 6.0 mm are rounded quickly and safely - without forming a secondary ridge - the sheet to be worked becomes manual with light pressure guided along the rotating deburring brush - Simple high speed radial brush rotation - Materials: Steel, stainless steel, aluminium, other non-ferrous metals * Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9238987 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7103 Type: TURNAMAT Producer: RSA Created: 2014 Parameters: Max. speed: 1500/3000 1/min Power consumption: 4.9 kW Max. thread diameter: 250 mm

Year: 1999 type: STL weight: 130 kg Deburring machine Make: RSA Type: STL year: 1999 weight: 130 kg ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brush deburring machine, tube deburring machine BAUER Type BE 1 Masch. No. 29-0520 Year of construction 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support Space requirement L x W x H 500 x 450 x 440 mm Weight 45 kg good condition; used

Brush deburring machine, pipe deburring machine BAUER Type BE 1 Masch. No. 05-72025 Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2,2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition; used

Brush deburring machine, tube deburring machine ERINI type 250 Year of manufacture approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm. Power 2.2 / 2.8 kW Mains connection 380 volts, 50 Hz - Material support - new deburring brush - Extraction connection 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition; used

Inv. Num. : 7417 Type: BSM 1300 RRDB Producer: RWT Created: 2015 Parameters: Vacuum belt width: 1300 mm Diameter of grinding rollers: 180 mm Feed roller diameter: 50 mm The thickness of the workpiece: 0.5-160 mm Abrasive belt speed: 18 m/s Weight: 2840 kg

Double-ended pipe end brush deburring machine Fabr. SCHOELLERPipe diameter: 20 - 70 mmsmallest pipe length approx: 200 mmlargest pipe length approx: 2000 mmBrush pressure: adjustable by handwheelBrush height: adjustable by handwheelPipes are laid manually, after deburring case in onesuitable containermotorized adjustment of tube length (motor missing)Weight approx: 2000 kgExternal dimensions L x W x H: 6200 x 1500 x 2100 mmWith- Control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Tooth edge deburring machine make RAUSCH type GRATOMAT GR 300 HV - HORI - FBMachine -No: 4337, built in 1998milling unit:- Hydropneumatic, retracting with additional pneumatic slidexa0xa0 (110 mm quick-stroke, 50 mm working stroke)Druckluftfrässpindel:- 950 mm rpm- right or left rotationBrush unit:- Retracting hydropneumatically- stroke 0 - 100 mm- 1.1 kW- 2800 rpm- Collet diameter 12 mmClamping unit:- Pneumatic three-jaw chuck SCHUNK diameter 160 mm- Possible use for bevel gear pinion shafts with number of teeth 7 - 11xa0xa0 for top or foot machining in full-stroke modeAir consumption: 600 l / minCurrent type: 400 V / 50 HzTotal power requirement: 5 kWSpace required: 3900 x 2900 x 2600 mmDimensions (LxWxH) approx: 2600 x 1800 x 2400 mmWeight approx: 1880 kgWith- CE marking- Fully automatic brush adjustment- full protection cabinused, in good conditionPrice on request.Delivery: ex wareh ...

Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed “dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum  ...