used OKUMA CNC Milling Centers

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (min⁻¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182

Used Good Condition Control Type OSP-P200L X axis stroke 690 mm Y-axis stroke 230 mm Z axis stroke 1.545 mm Axis C 360° Axis B 225° Max workpiece vault Ø 630 mm Max. workable diameter Ø 710 mm workable length 1.500 mm Main spindle speed 38-3,800 rpm Spindle nose A2-8 Tool magazine 20 Chip Evacuator Accessories

Key data: 210 mm, 400 mm

Okuma LT 2000 EX 2T 2M 2Y Big Bore Steuerung/ Control : OSP P 200 L , kein IGF One Touch Advance Year of manufacture / YOM : 09/ 2011 Power On : approx. 13000 [h] Spindle running time : [h] : Location: Availability /: from stock Sweden Condition / technical condition : 9 / 10 TECHNISCHE DATEN / TECHNICAL DATA: Max. turning length / max turning length : [mm] 700 Hauptspindel / Main Spindle Turning dia : [mm] 210 Max. turning dia over bed : [mm] 400 max. RPM/ spindle speed : [1/min.] 6000 Spindle bore / spindle bore : [mm] full clamping cylinder Drive power / spindle power : [kW] 22/15 max. rotation speed 6000 rpm Travel XA / XB axis : 205 mm Travel ZA / ZB axis : 700 mm Travel W axis : 730 mm Travel YA / axis : 95 mm Travel YB / axle : 95 mm C-axis : 2 x 0.001 degrees/degree Counter spindle / subspindle max. speed/ spindle speed : [1/min.] 6000 S ...

Key data: 340 mm, 950 mm

Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] 25/15/30 Rapid traverse C - axis [1/min] 200 Working feed X/Z - axes [mm/rev] 0.001-1.000 Tool carrier "A": Tool system BMT 60 Okuma Tool Slots [pcs] 12 Driven Tools [pcs] 12 Driven tools - sp ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

CNC Lathe OKUMA LU3000EX Year 2021 Main features. OSP-P300LA（ Easy program advance D） 8’ Hallow Chuck Max length 600 Touch Center Up turret V-12/Below turret:V-8 Tailstock Steady rest Chip conveyor High pressure coolant Mist collector

OKUMA MX 45 VAE TECHNICAL SPECIFICATIONS CNC model Okuma OSP Cnc version OSP 700 M Tool mount BT 40 Spindle power 11Kw Kw Number of Spindle Revolutions 7000 Tool number 30 X-axis travel 762 mm Y-axis travel 460 mm Z-axis travel 450 mm Rapid advances linear axes X Y Z 30 30 24 m/min Table dimensions 1000x460 mm Roller guides High cooling pressure Pressure value 15 bar System with external tank with filter yes Dredging chip evacuator

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type OSP-P200M X Axis Stroke 700 mm Y Axis Stroke 900 mm Z Axis Stroke 780 mm N. pallets 2 Table dimensions 500 x 500 mm workpiece dimensions Ø 800 x 1.000 mm workpiece weight 800 Kg Spindle speed 6,000 rpm Tool attachment BT-50 Tool magazine 60 positions Accessories Chip Evacuator, Electronic Handwheel, Renishaw Probe

Good Condition Control type OSP P200 M X Axis Stroke 1.020 mm Y Axis Stroke 1.020 mm Z Axis Stroke 1.020 mm Axis A +30°~-120° Axis C ±360° Center-Center Distance Spindle Nose -50~970mm (vertical) / -300~720mm (horizontal) Rapid feed X-Y-Z 30 m/min ; A-C 3,600 rpm Table dimensions 800 x 800 mm Permissible weight 1.000 Kg Automatic palletizing 6 positions including 4 additional pallets Spindle speed 100 - 10,000 rpm Spindle power 22/18,5 Kw Spindle connection BT50 Tool magazine 120 positions Refrigeration through spindle 70 Bar Chip Evacuator Accessories

This OKUMA MB-46VAE Vertical Machining Centre was manufactured in 2005. It comes with a OKUMA CNC OSP-E100M control unit and a spindle speed of 8,000 rpm. It has 3 axis (X = 762 mm / Y = 460 mm / Z = 460 mm) and has a workspace of 1000 x 460 mm. The tool holder is BT40 (N laying tools 32).

This OKUMA MB-5000H Horizontal Machining center was manufactured in the year 2016 in Japan. It has 4 axis.

This OKUMA MA-600HB Horizontal Machining Center was manufactured in the year 2006 in Japan. The machine has a spindle speed of 60-5000 rpm and has 4 axis.

This OKUMA MA-400HA Horizontal Machining center was made in 2006. It has 4 axis.

This OKUMA MB 56-VA Vertical Machining center was manufactured in the year 2003. It is equipped with an OKUMA OSP U100 control unit and has 3 axis. The machine has a spindle speed of 15000 rpm.

This Okuma MX-50HB Horizontal Machining center was made in 1997 in Japan. It is controlled by an Okuma OSP700M control unit and has 3 axis. The machine has a spindle speed of 50-10000 rpm.

This OKUMA Genos M560R-V Vertical Machining center was manufactured in the year 2014 in Taiwan and has 5800 production hours. It is equipped with an OKUMA OSP-P300M-R control unit. The machine has a spindle speed of 12000 rpm.

This OKUMA MX 40HA Horizontal Machining center was manufactured in the year 2004. It is equipped with an Okuma OSP 7000 M control unit and has 4 axis. The machine has a spindle speed of 7000 rpm.

This Okuma MX45-VAE Vertical Machining center was manufactured in the year 1999 in Japan and has 18000 production hours. It is controlled by an Okuma OSP U100M control unit. The machine has a spindle speed of 12000 rpm.

This OKUMA GENOS M460V-5AX Universal Machining center was manufactured in the year 2019. It has 5 axis and a tool magazin with 48 slots. The machine has a spindle speed of 15000 rpm.

This 4-axis OKUMA SPACE CENTER MA-600HB horizontal machining center was manufactured in 2007. It boasts a robust 160-tool ATC warehouse, continuous 4th axis table, and high-pressure cooling system at 30 BAR. With X/Y/Z strokes of 1000/800/810 mm and a maximum spindle speed of 6000 RPM, this machine ensures precision and flexibility for various machining tasks. The OKUMA MA-600HB machine we have for sale is designed for heavy-duty machining, accommodating pieces up to 1500 kg. For further details, please contact us.

This 4-Axis vertical machine center was manufactured in 2021. Equipped with Okuma OSP – P300MA-e control, it boasts a spacious work area of 1300 x 560mm and a max load capacity of 900 kg. With 32-tool storage, precision is assured across the X, Y, and Z axes measuring 1050mm, 560mm, and 460mm respectively. Ideal for diverse machining needs, buy this Okuma GENOS M560-V-e vertical machine center for efficient and reliable production. Contact us for further information.

Table length: 1000 mm Table width: 460 mm Longitudinal X: 762 mm Cross Y: 460 mm Vertical Z: 460 mm Positions ATC: 32   Positions APC: 0   CNC Brand: Okuma CNC Model: OSP-U100M 3-axis CNC machine (VMC)Okuma - MB-46VA MACH-ID 8708 Make: Okuma Type: MB-46VA Control: OSP-U100M Year: 2004 X - Travel762 mm Y - Travel460 mm Z - Travel460 mm Table Length1000 mm Table Width460 mm Table load800 Feed rate X-Axis40000 mm/min. Feed rate Y-Axis40000 mm/min. Feed rate Z-Axis32000 mm/min. Spindle Taper40 ISO/Bt/Mk Power on spindle11 kW Speeds / ranges8000 Rpm ATC / revolver32 Coolant through spindle / Bar20 Number of controlled axis3 Chip conveyorYes Coolantsystem

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

Turning diameter: 580 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP P 200 L Okuma - Space Turn LB 3000 MY CNC Lathe with C / Y Axis MACH - ID 6346 Make: Okuma Type: Space Turn LB 3000 MY Control: OSP-P200L YOP: 2006 Max. turning Ø    580 mm X-Axis      260 mm Y-Axis       115 mm Z-Axis       1.000 mm Spindle bore        80 mm Speedrange         4200 Rpm Spindle power      30 kW ATC / revolver      12 Speed live tools       6000 Rpm Control       OSP-200 Chip conveyor     Yes Tool eye        Yes Dimensions Length    4.400 mm Width      2.430 mm Height&nbs ...