We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm
used
specifications: - Roll diameter 420 mm - Projection 410 mm - maximum passage height 265 mm - Table size 600 x 600 mm - Table li. + re. swivel each 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Sawing bandwidth 3 - 16 mm - 8 Cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space required approx. W 900 x H 1900 x D 1000 mm - E. foot button
used
Vertical band saw MÖSSNER REKORD type SM 320 Masch. No. 24514 Year of construction 1985 Table size 500 x 500 mm Projection 310 mm Roll diameter 320 mm Workpiece height max. 200 mm Working height 950 mm Cutting speed 12 - 375 m/min. 8 steps mains connection 380 volts, 50 Hz - 4 gear stages and 2 engine speeds - Band saw blade welder IDEAL BS 0-16 - Scissors - Grinder - tiltable table Space requirement L x W x H 800 x 770 x 1700 mm Weight approx. 550 kg very good condition; used
used
Vertical band saw MÖSSNER REKORD type SM 420 Masch. No. 17010 Year of construction 1968 Roll diameter 420 mm Projection in width 415 mm Projection in height 265 mm Table size 605 x 600 mm Belt speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 V 50 Hz band saw blade speed via 4 gear stages and 2 motor speeds - saw blade butt welding machine IDEAL BS 0-16 with scissors and whetstone - swivel work table in 2 axes Space requirement L x W x H 950 x 750 x 1900 mm Weight 570 kg good condition; used
used
Description: Machine number: 18401 Table dimensions: 800 x 750 mm Cutting height: approx. 100 mm Incl. grindstone and a device for welding saw bands Also 2 integrated drawers weight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 900 x 2,000 mm
used
Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting
used
Specifications: - Roll diameter 420 mm - Projection 410 mm - passage height 265 mm - Table size 600 x 600 mm - Table left + right. Swivel 15 / 30 ° each - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Saw belt width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch
used
roll diameter: 500 mm throat: 1050 / 485 mm workpiece height: 300 mm saw band length: 3920 - 4050 mm cutting speed: 15 - 940 m/min table height: 1040 mm table surface area: 750 x 800 mm Table tiltable: 15 Grad total power requirement: 4,0 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 2100 x 1000 x 2100 mm - Fully automatic miter band saw - MAC 90 control - Saw feed infinitely adjustable via precision throttle - Infinitely adjustable clamping pressure - Infinitely variable speed adjustment of the saw band - hydraulic bundle clamping - chip conveyor - Cooling device - Micro dosing device - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 800 mm
Technical data approx.: - Roll diameter 800 mm - Projection 785 mm - max. passage height 720 mm - Folding table - Saw blade length 6350 mm - Saw band width 10 - 34 mm - infinitely variable cutting speed up to 2300 m/min - Drive 400 V / 11 kW - Weight approx. 2300 kg - Space requirement approx. W 1600 x H 2900 x D 1900 mm
used
Description Mossner Record vert. Band saw. The welding machine is defective! Specifications Manufacturer Mossner-Rekord Model SSF-420 Use State
used
Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.
used
Dough dividing and warping machine bread roll press Erica Rekord -Semi-automatic dough dividing and warping machine -Erica Record -Size 3 -30 pieces
used
automatic bread slicer
used
Fully automatic machine, Fabr. Erika, Rekord Automat 2
used
Aluminum circular saw, chop saw, glass bead saw, aluminum chop saw, metal chop saw, chop and miter saw -Processing: of flat, angle and solid material, tubes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg
used
Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm -Weight: 0.4 kg
used
pressure: 3 t throat: 55-120 mm weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,6x0,5x1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted
used
Specifications: Cutting width 500 mm Table size 800 x 820 mm Travel approx. 350 mm Cutting height under guide approx. 400 mm Belt length 4000 mm Infinitely variable speeds approx. Gearbox stage 1 15 – 80 m/min Gearbox Stage 2 75 - 305 m/min Gearbox Stage 3 207 - 944 m/min
used
Specifications: Cutting width 1050 mm Table size 800 x 820 mm Automatic travel approx. 340 mm Cutting height under guide 400 mm Cutting height under the handwheel approx. 290 mm Belt length 5250 - 5380 mm Infinitely variable speeds - Gearbox stage 1 17 - 79 m/min - Gearbox stage 2 67 - 305 m/min - Gearbox level 3 207 - 940 m/min
used
Vertical band saw machine make MÖSSNER type Rekord SM/ 400Machine -No: 14464, built in 1965Technical specifications:Table size according to the manufacturer: 600 x 600 mmTable tiltable up to: 15°Projection: 400 mmCutting height: 260 mmRoll Diameter: 400mm6 cutting speeds: 12 - 750 m/minSaw band length: 2780 - 2980 mmDrive power approx.: 1.1 kW 380 VDimensions: 1000 x 750 x 1800mmWeight approx.: 340 kgWith- Band saw welding machine IDEAL type BSO 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes.