used MITSUBISHI EDM Machines

Key data: 780 mm, 3500 kg

Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3 mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filter fineness 3μm Filter elements 2 Temperature control dielectric cooling unit Weight without filling 430kg Machine is in good working condition. Can be seen under power. Availability: short-term.

Key data: 780 mm, 3500 kg

Description, subject to prior sale. Wire Eroding Machine Travels: X 500mm Y 350mm Z 300mm U± 32 V± 32 Taper angle (at workpiece height) 15° (100mm) Max. workpiece dimension (W x D x H) 1050 x 800 x 295mm Max. workpiece weight 800kg Table dimensions (W x D) 780 x 630mm Possible wire diameter 0.1-0.3mm Coils intake 10kg Automatic jet of water threading Wire shredder Max. feed (X/Y) 1300 mm/min Total dimension (W x D x H) 1883 x 2622 x 2150 Machine weight 3500kg Filtre unit: Tank capacity 708L Filtre fineness 3μm Filtre elements 2 Temperature control dielectric cooling unit Weight without filling 400kg Machine is in good working condition. Can be seen under power. Availability: short-term.

Key data: 500 mm, 3 0, 3500 kg

Travel X 500 mm / Y 350 MM / Z 300 mm Water bath machine Automatic wire threading incl. radiator

Mitsubishi FA20S EDM Wire Cutting Machine Automatic wire threading

Wire erosion for sale X : 500 mm Y : 350 mm Z : 300 mm

Weight: 3.1t, with controls, changeover and documentation, without magnetic plate.

Compressed air supply: 27l/min, length: 1750mm, width: 2050mm, height: 2235mm, weight: 3.7t.

Max. load: 800kg, weight: 2.55t, the machine needs overhauling, the generator is defective, an inspection is possible.

CNC controller: FP 80 Axes: X-axis travel mm: 300 Y-axis travel mm: 250 Z-axis travel mm: 250 Distance between table surface and electrode clamp surface (for standard electrode and table): 223 - 473 Max. Electrode weight kg: 25 Worktable: Table dimensions mm: 500x350 Maximum workpiece size (W × D × H)) mm: 740x470x130 Max. workpiece weight kg: 550 Working tank inner dimensions (W x D x H) mm: 770x500x230 Dielectric fluid reservoir capacity L: 165 Dielectric fluid filter method: paper filter Basic machine dimensions / weight: Length mm: 1.460 Width mm: 1.900 Height mm: 2.075 Weight kg: 2.000

Installed in August 2014 Regularly maintained Usually very small pieces are cut https://www.mitsubishi-edm.de/en/mvs-series-specifications.html

Manufacturer Mitsubishi Model MV1200S Year 2014 Imported to Germany in October 2022 Fully maintained

Mitsubishi FX10 EDM, year 1997, the following technical characteristics: X-Y-Z axis strokes mm 350-250-220, U-V axis strokes mm 32-32, maximum workpiece weight kg 500, maximum piece size mm 800-575-215, automatic threading, immersion machine, CNC: Mitsubishi X axis travel: 350 mm Y axis travel: 250 mm Z axis travel: 220 mm Max length of the piece: 800 mm Max workpiece width: 575 mm Max height of the piece: 215 mm Max workpiece weight: 500 kg Automatic threading: Yes

Description: Serial Number:55DR1663 Max. Workpiece dimensions: 800x600x215 mm Max. Workpiece weight: 500 kg Table dimensions: 640 x 540 mm Travels: X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Table rapid traverse rate: 1300 mm/min Wire diameter: 0,1 to 0,3 mm Max. Wire feed speed: 23 m/min Wire tension: 0,5 to 25 n Taper: OPTOLinear T/C device Taper angle: 15º (with 200mm plate thickness) Working Hours 24073 Dielectric Fluid Reservoir: Working tank volume: 550 litres Filtration flow rate: 50 l/min Water purifier: 10 litres Other features: Superfinishing Rugosity less than Ra 0.2 weight approx.: 2,980 kg, Approx. Onsite Dimension. (l x w x h): 1,910 x 2,702 x 2,015 mm

This MITSUBISHI FA20SM Erosion machine was manufactured in the year 2006. The machine has a wire diameter of 0.1 to 0.3 mm.

This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity.

Inv. Num: 5422 Type: ML3015eX PLUS Producer: Mitsubishi Generated: 2017 Parameters: Control system: MITSUBISHI M 700 Engine hours: 21480 h Spindle hours: 1480 h Laser power: 4.5 kW Maximum table load (even): 930 kg Feed length X-axis: 3100 mm Feed length Y-axis: 1565 mm Feed length Z-axis: 150 mm Machine length: 10210 mm Machine width: 3130 mm Machine Weight: 10700 kg

Wire diameter: 320 mm Speed: 0 rpm Number of rolls: 0   X-Axis:                 320mm Y-Axis:                 245mm Z-Axis:                 220mm Table size L x W / or ø:695 x 590 mm Table load:             500Kg Length:                 2.000 mm  Width:                  2.100 mm  Height:                 2.100 mm  Weight:                 2.400 kg 

MITSUBISHI solar panel prodcution machines year `2011 x 65 units

MITSUBISHI GUIDELESS CNC GEAR SHAPER Model ST40A s/n will advise Condition; NEW Condition Delivered and installed July 2020 low hours Less than 1900 hours Machine was delivered and installed 3rd QTR of 2020 and has been hardly used. Customer is looking to sell due to limited work and project loss.machine is available for immediate inspection. Machine is equipped with all required features, Tailstock & Pinion support, chip conveyor and all options. Machine wont last contact us today!! Machine specifications to follow shortly: -Maximum diameter capacity 18" / 450 mm Option -Maximum DP/ module 3.175 DP/8 mod -Maximum work width 4.52" / 115 mm -Maximum cutter stroke 5.31" / 135 mm -Maximum helix angle + 45 deg -Cutter stroke 30-600 SPM -number of cuts 1-4 -Center distance from cutter Max/ Min 16.73" / -4.92" -Maximum radial travel 21.65" -Height of work table to spin ...

This Mitsubishi EX 8 Erosion Machine was built in the year 1996 and has approximately 28000 production hours. It is equipped with a Mitsubishi FP35E control unit. The machine has a table of 500 x 350mm and a max. workpiece weight of 550 kg.

This MITSUBISHI FX20K Wire EDM machine was manufactured in 1999 in Japan. The machine has a table of 1500 x 800mm and a max. workpiece weight of 800kg.

M. No.: 91080-41861 // Power: first 70 Sec. Following 52 Sec. Format (cm): 41,4 x 55 (max.) Equipment / Additional information: Plate width (cm): 22.9 - 41.4 Plate length (cm): 22.0 - 55 Maximum effective image size (cm): 40.4 - 54 Magnification: 100% Lens (cm): 25 Step and Repeat setter: Original side down Digital recording: 0 - 99 Light source: 1 Halogen-Diode, 80 V / 800 W Tank capacity: Activator 0.55 l, stabilizer 0.60 l Power supply: 200 V / 220 V / 240 V, 1.9 Kw High quality plate results: up to 133 lpi

Chromed cylinders, console, double sheet control, semi auto plate change, alcohol damping, technotrans recirculation and refrigeration, perfecting 2 / 2 and 4/0, Grafix powder spray, IR dryer, auto blanket ink roller washers, automatic impression cylinder washers Mitsubishi D 3000 - 4R (4/0-2/2) from 2003 A 4 colors offset printing press of size 72 x 102 cm Option; IPC (ink remote CTRL.), Mitsu. Alcohol damp. With technological TRANS recirculation & refrigeration and ink temperature control (techno TRANS BETA C), all auto. Washers, S - APC, car. Setting size and double sheet control PPC, Grafix IR dryer PERFECTOR 4/0 - 2/2, prepared for CIP connection, prepared for NON stop delivery, Grafix powder spray condition; VERY GOOD condition, ONLY 84 million impressions immediately available, can be Lakes RUNNING in our Factory Pictures at http://www.imprimerie-unal.com/p-d3000r/r1. ...

Cylinder head Exchange

used radiators for water cooled industrial engines - for example ISEKI Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Yanmar etc. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, dsey Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors. - JODAU local, environmental & green care technology- second hand equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...