used KJELLBERG Plasma Cutting Systems

specifications: - air-cooled plasma cutter portable - Cutting current adjustable in 3 stages 20 - 60 A - Duty cycle 30 A / 100% ED - 60 A / 60% ED - max. cutting thickness - steel approx. 15 mm - Alu ca. 10 mm - Stainless steel approx. 8 mm - Pneumatic connection - Connection 400 V / max. 9 kVA - burner package - Ground cable - Space requirement approx. W 500 x H 750 x D 800 mm - Weight approx. 20 kg

Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...

; mint condition, ready for use

With 2 machine burner hose packs (15m) 1 x Percut 101.-2 1 x quick-release head naehere information on request; ready for use

Kjellberg Hifocus 160i used with manual gas console . only 504 operating hours. data see pdf; ready to use

Hifocus 160 i with automatic gas console PGV 2 with Percut 450 quick-release head with torch hose package 6m assembly and reversing on request.; ready for use

; ready for immediate use

Plasma cutting system / power source Manufacturer: Kjellberg Type: PA-S47 CNC Year of construction: 1994 Cutting power: 40-130 A Quality section: 35 mm Cut: 45 mm Gas console: PV-S75W-1 without hose package .

- table is 12x2 m - air filtration sistem is in the price (TAMA - Italy) - 8 cylindrical filters - the filters currently installed inside are only 6 months old - it has a possibility of self cleaning the filters

Plasma cutting table 3000 x 1500 mm - Kjellberg Hi Focus 130 Plus Plasma High Definition Kjellberg Hi Focus 130 Plus. MSNC 500 numerical control + Asperwin CAM software. Donaldson 3000 m³ filter unit. Air compressor and dryer. All in very good condition, 1052 hours use. Year of construction 2005. Commissioning 2006. It is possible to inspect the machine in operation.

New 161 i with automatic gas console year construction year 2015 installation and commissioning on request data see PDF HiFocus 160i 400V ArH2N2/O2 up to 15m with plasma torch connection unit Oxygen; Nitrogen; Argon; Hydrogen; Air oxygen; Nitrogen; Forming gas 5; Air plasma machine burner PerCut 170-2 with vortex gas ; immediately available

Kjellberg Plasma Quick-change head Percut 370 M 1 , 160 amps data see PDF; ready to use

Kjellberg plasma quick change head Percut 370 M 1, 160 amp See PDF data

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

Flame separating machine Manufacturer: Kjellberg

; in stock

; ready to use

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Welding inverter, welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable:. with electrode clamp -Ground cable -Dimension: 560/290(H500 mm -Weight: 44kg

Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC -Weight: 5.1 kg

From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-

CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

CNC Portal Plasma Cutting Machine + Autogen Manufacturer: Messer Type: Omnimat L 5600 Built: 1999 CNC control: Omnicom Track width: 5,600 mm Career length: 25 m Working range: 4 x 22 m 1 plasma torch with hypertherm HD3070 power source 2 car-gene burners 1 powder marker Suction table Filter system Donaldson

CNC Portal Plasma Cutting Machine Manufacturer: Zinser Type: 2425 N Built: 2007 CNC control: CNC2050 1 plasma burner with power source Kjellberg HiFocus 160i Working area: 2x4 m Length: 6 m Table and filter on request

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table