used KALTENBACH Miter Bandsaws

Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Machine type: Aluminum miter circular saw Manufacturer: KALTENBACH Model: TL 400 Machine number: 52565 Built: 1985 Condition: very good Offer type: used machine Technical data: Cutting range: max. x 130 mm Sheet diameter: 400 mm Drive type: el./mech. Drive: 3.0 kW / 400 V Remark: with mobile base Weight: 200 kg The machine is in a very good and ready-to-use condition and can be inspected and demonstrated at any time. We would be happy if our offer finds your interest.

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Manufacturer: Kaltenbach, double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: 45° pivotable -Saw blade: Ø 490 mm -Accessories: incl. Saw blades see photos -Total dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...

Saw blades: Carbide / HSS, 450 mm Power: saw motor, 4,0 / 5,5 KW Speed: stepless, 10 - 60 min-1 Cutting speed: Blade (450 mm), 7-43, or 15-75 m / min Saw height control: continuously variable, electronically Square 90° maximum working range: 140 x 140 mm 45° max: workspace flat 90° Max: 240 x 80 mm 45° max: work area round 90° Max: 150 mm 45° max: supplies length easy stroke: 5-1000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Gewicht(Säge)CA.:3100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm footprint Lxw: 2500 mm x 1300 mm, the machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to  ...

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

Overhaul year 2018 Year of construction 1995-2005 Saw blades Carbide / HSS 450 mm Power saw motor 5.5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed Blade (450 mm) 15-75 m / min Saw height control infinitely adjustable electronic 5 Workspace square 90° Max: 140 x 140 mm Workspace flat 90° Max: 240 x 80 mm Work area around 90° Max: 150 mm Supply length 5-9999 mm Supply AC servo max speed: 500 mm / s (Saw) approximate weight: 2100 kg Dimensions Lxwxh (saw) about: 2500mm x 1300mm x 2100mm Footprint Lxw 2500 mm x 1300 mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interface to control the machine ensures a simple and trouble-free operation of the system. Due to the construction of the sawing machine, it is possible to realize a very accurate length toleran ...

Saw blades Carbide / HSS: 450 mm Power: 4,0 / 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed (450 mm) blade: 7-43, or 15-75/min Saw height control adjustable full electronic Square 90° maximum working range: 140 x 140 mm 45° max.: Flat workspace: 90° Max: 240 x 80 mm 45° max: work area round: 90° Max: 150 mm 45° max: supplies length easy stroke: 5-2000 mm Multiple stroke: 5-9999 mm Supply AC servo max speed: 500 mm / s Approximate weight: 3600 kg Dimensions Lxwxh: 3500 mm x 1300 mm x 2100 mm Lxw surface: 3500 x 1300 mm? Technical description of 401 k PPS / PPS 451 NA 2000 retrofit 401 k PPS / PPS 451 retrofit high-speed sawing machine for steel. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The HMI interfac ...

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Aluminum circular saw make KALTENBACH type SKL 350Machine -No: 12561Technical specifications:Cutting range: 90°round: 135mmsquare: 120 mmflat: 70 x 280 mmCutting range: 45°square: 105 mmflat: 55 x 210 mmSaw blade speeds: 2250/ 4500 m/minDrive power: 5/6 hpWeight: 650kgExternal dimensions approx.: 1200 x 1200 x 1500 mmwith- pneumatic material clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

Original Replacement Rotary Pulse Encoder for Kaltenbach Saw KKS 400

Hydraulic Miter Metal Cold Circular Semiautomatic Saw Fabr. KALTENBACH Type KKS 401 HMachine -No: 112710 built in 1991Saw blade size: 375/400/425 mmCutting width max .: 5 mmCutting speed: 10/20 m / minCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 mmxa0xa0xa0 45 ° square: 110 x 110 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmSaw blade feed speed: 0 - 1200 mm / minDrive power: 1.7 / 2.6 kWOutside dimensions: 1170 x 1070 x 1960 mmWeight (machine only): 1350 kglittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...

Hydr. Metal circular saw make KALTENBACH type KKS 401Machine -No: 113025 Year 1991Saw blade size: 375 - 425 mmCutting area round: 130 mmxa0xa0xa0 90 ° square: 120 x 120 mmxa0xa0xa0 90 ° flat: 250 x 40 mmxa0xa0xa0 45 ° flat: 170 x 50 mmCutting width: 5.0 mmSaw blade hole: 50 mmSaw blade feed speed: 0 - 1200 mm / min.Opening stroke of the vice: 160 mmTurntable adjustment stepless: + - 60 °Cutting speed: 10 - 60 m / min.Drive power: 5.5 kWWeight approx: 1.35 tOutside dimensions approx: 1360 x 720 x 2100 mmWith- aut. duty cycle for straight and oblique cuts- mot. Transmission adjustment- hydr. Drehtischklemmung- hydr. Turntable rotation- mot. saw gear adjustmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer an ...

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

Cold circular saw make KALTENBACH type KKS 350Fabr. -No: 22003, built around 1965Saw blade diameter: 350 mm2 saw blade speeds: 15 + 30 rpm2 cutting speeds: 16.5 / 33 m / minSaw cross section approx: 130 x 50 mmaround max. 80 mmClamping stroke max. : 45 mmExternal dimensions L x D x H: 1000 x 1200 x 1900 mmWeight approx: 1500 kgWith:- pneumatic workpiece clamping (holding down)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

saw blade diameter: 450 mm stroke: mm total power requirement: kW dimensions of the machine ca.: m cutting diameter: mm weight of the machine ca.: 2 t cutting range round 220mm cutting range square 470mm x 30mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: flat: 220 x 90 mm turning speeds: 3200 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 3,0 kW weight: 125 kg range L-W-H: 700 x 900 x 1500 mm Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm cutting diameter: 130 mm capacity 90 degrees: flat: 220 x 90 mm turning speeds: 3200 U/min saw-blade dia.: 400 x 3,2 x 40 mm motor: 400 Volt total power requirement: 3,0 kW weight: 125 kg range L-W-H: 700 x 900 x 1500 mm Furnishing: - Precise and accident-free work thanks to cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.