We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
see photos
used
Press pressure up to 900 KN Hint: without ripcord
used
HYDRAULIC PRESS Manufacturer: JOOS Type: HP 90 Shelf size : 2550x1350 Hydraulic, electric Teflon shelves Elkom 6 actuators
used
Emergency stop strip, control by button, gold anodized plates---------- Technical Data ---------- pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm , Number of cylinders: 4 pieces Sold as is, without technical inspection
used
Hydr. Glueing machine make JOOS type HPS 20 SMachine -No: 68/3576 built in 1969Table size: 1000 x 1000 mmInstallation height (height of the press room): 1000 mmPressure gauge: 630 barOperating pressure: 300 barPiston diameter: 65 mmNumber of cylinders: 2Stroke: 400 mmDrive power: 1.5 hpDimensions: 1700 x 1100 x 2400 mmWith- Timer- extendable table- Cylinder movement from below- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Double shaft grinder of August jade Maschinenfabrik Frauenfeld Built in 1940 Weight approx. 1100 kg L x W x H: 150 x 80 x 110 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Joos Upstroke Press Type HP-S180 Platen size 2800mm wide x 1500mm deep Operating pressure 180ton 550mm daylight 1800kN Year 1985
used
Working surface: 2200x1250mm, pressing force: 65t, connected load: 1.4kW, length: 2540mm, width: 1450mm, height: 1950mm, weight: 2.6t.
used
Working width: 1300mm, roller diameter: 185mm, max. opening height: 100mm, working height: 800mm, power: 0.37kW.
used
grinding wheel diameter: 400 mm no. of working stations: 1 Stück total power requirement: 1,7 kW weight of the machine ca.: 0.4 t With coolant system More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Spritz- und Schnittpastäckmaschine, Fabr. Benier-Joosten
used
Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018
used
pressing area: 2500mm x 1250mm; opening: 290mm; heating: elektric; plate surface: ALU - anodized; Emergency stop switch: yes, ripcord; pressure: 75t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 3500kg;
used
Plate dimensions: 2.500 x 1.250 mm Daylight opening: 400 mm Number of daylights: 4 St. Heating: elektrisch Specific pressure: 2,9 kg/cm² Total pressure: 90 to Motor output: 2,2 kW weight of the machine ca.: ca. 2.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressing area: 3000mm x 1350mm; opening: 400mm; heating: electric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 115t; number of cylinder: 6; electricity: 57A; machine length: 3500 mm; machine width: 1500mm; weight: 5500kg;
used
Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, we ...
used
Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System
used
HOT PRESS type COLOMBO REMO HPC 8 / 160 second hand WITH SOLID STEEL PLATES Heavy-duty construction Hot water heating via a electric system on the back of the machine , not any connection needed , everything is included on the machine Total Kw for heating 25 Solid steel plates size mm. 3450 x 1400 n.08 pistons diam.mm. 90 max. thrust Ton. 160 specific pressure max. kgs.5 / cm2 opening mm. 660 emergency perimeter rope overall dimensions cm. 4500 x 2000 x 2700 H weight kgs. 8500
used
HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water
used
Working Sizes: 1300 x 3500 mm
used
Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Hydraulic press for bent glued parts Tuma FP120 Сharacteristic Table size, mm - 1400х600 Maximum opening size, mm - 1000 Number of upper cylinders, pcs - 2 Number of side cylinders, pcs - 2 Diameter of cylinders, mm - 160 Working pressure, Bar - 180-190 Year of manufacture - 1989
used
Veneering press OMC PL 105 LC 30/13 Water Work surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature 85 degrees Control system logic contorl Machine control from touch panel readings Temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes Power 21KW CE Certificate Production 2023 Machine available on request New machine Net price
used
Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0
used
• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...