used IMS Profile Steel Cutters

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...

There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t.

IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be carried out by a specialist authorised by the manufacturer or technicians!

Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy

Number of conrods 1 Table dimensions ( x-y/mm) 850 X 550 Slide Dimensions X-Y (mm) 560 X 376 Stroke (mm) 10 - 110 Slide Adjustment (mm) 80 Light at T.D.C.*(mm) 470 Strokes type Fixed Stroke per minute 60 Location Milan Italy Machine Conditions Ce Marked Model P80re Year of made 1996

Pressure:040 t throat:180 mm stroke:0 - 76 mm no. of strokes:145 /min distance table/ram, max. stroke up, adjustment up:350 mm table surface area:600 x 360 mm hole in the table:110 mm table height over floor:800 mm ram surface:270 x 175 mm ram adjustment:65 mm power capacity:2,2 kW weight:1,75 t Dimensions (WxDxH):1,1 x 1,2 x 2,1 m German Safety: permitted for manual loading:CE-sign clutch:pneumatic

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Karl Schnell emulsifier Power: 9 kW

K+G Weather SM 120 T2M-R, 120 litre cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keypad, knife shaft speed 2-tourig, 2 bowl speeds, mixing gear forward and backward, temperature-end shutdown, digital display knife shaft temperature bowl, knife head with 6 knives. The machine is currently undergoing refurbishment and will be available shortly.

Treif Portion cutter Model: 1943 1998. Stainless, infeed chamber 600mm length x 180mm width x 140mm depth, up to 300 cuts a minute, it is possible to cut large bone-in as well as boneless products, such as bacon, spare ribs, chops and "T-bone" steaks, or dairy products, such as cheese, either fresh, chilled or deep-frozen to - 4°C.

K+G Wetter SM 65 STL bowl cutter, 65 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife Speed, 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse, temperature switch off function, knife head with 6 knives. The machine is immediately available and can be tested like in Koblenz, Germany.

Seydelmann K 60 Ultra, 60 liters bowl cutter, operation via knee lever switches, separate digital display, noise protection cover, central lubrication point for knife-shaft, 2 knives speeds, 2 bowl speeds, 2 mixing speeds forward, knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

K+G Wetter Cutmix 70 STL bowl cutter, 70 liters bowl chopper, all stainless steel, membrane keyboard, variable knife speed up to 5.000 rounds per minute, mixing speeds forwards and reverse, knife shaft brake electrically operated ,knife head with 6 knives, bowl with highest filling level, noise reduction cover. You are very welcome to test the machine in Koblenz, Germany.

Laska KU 65 cutter, bowl capacity 65 liters, microprocessor control, membrane keyboard, stepless speed control, 4 freely programmable fixed speeds, mixing gear forward and backward continuously, 6 knife head, electric knife shaft brake, noise protection cover. The cutter can be tested in 56070 Koblenz.

Kramer + Grebe SM 45 STL, 45 liters bowl cutter, all stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, 2 knife speeds, mixing speed forwards, 2 bowl speeds, standard knife head with 6 knives. The machine is immediately available and can be tested in Koblenz, Germany.

Kilia Meister Plus 50 bowl cutter, 50 liters bowl of stainless steel, almost completely made of solid stainless steel, Siemens control, noise absorbing cover of transparent special plastic, central point of lubrication for knife shaft, balanceable and exchangeable knife head, variable knife speed, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.

Kilia Supreme Cut 200 ltr., 200 liters bowl cutter, bowl and bowl-cover stainless steel, year of manufacture 2011, hydraulic noise reduction cover, knife shaft brake electrically operated, separate stainless steel electric control cabinet, membrane keyboard, variable bowl speed, variable knife speed, variable mixing speed forwards and reverse, cleaning system, knife head with 6 knifes, hydraulic loading device for 200 liter bins, hydraulic unloader. You are very welcome to inspect and test the machine.

Type Cutters Warranty 12 months Height 2350 Width 2200 mm Length 1910 mm Weight 4000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 57.25 kw Main material Stainlees Steel Time of realisation in stock Cutter Type Bowl Cutter Cutter made of Stainless steel Bowl made of Stainless steel Bowl capacity 200 l Efficiency 100-140 kg/cycle Knives amount 6 pc. Knife shaft revolutions 900/1800/3600 rpm Bowl revolutions 7.5/10/15 rpm

MADO MSM 764 SUPRA 50 M, 50 Liters bowl cutter, 2 knife speeds, mixing speed forward and reverse, 2 bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter SM 65 T2M-R, 65 liters bowl cutter, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake, main switch as well as electric control cabinet integrated, membrane keyboard, 2 knife speeds 1.500 – 3.000 rounds per minute, mixing speeds forwards and reverse, knife head with 6 knives. You are very welcome to test the machine in Koblenz, Germany.

K+G Wetter SM 90 STL bowl cutter, 90 liters bowl chopper, bowl and bowl-cover stainless steel, noise reduction cover, knife shaft brake electrically operated, main switch as well as electric control cabinet integrated, membrane keypad, variable knife speed up to 5,000 rpm., 2 bowl speeds (9/18 UpM), mixing speeds forwards and reverse (40-500 UpM), temperature switch off function, knife head with 6 knives, power 32 kW. You are very welcome to test the machine in our facility in Koblenz, Germany.

K+G Wetter vacuum Cutmix 120 STL, model VCM 120 ,120 liters vacuum cutter, variable knife sdpeed, 2 bowl speeds, mixing speed forward and reverse, variable bowl speed, unloader manually operated, hydrlauic unloading device, knife cover electrically operated, with cooking facility. Further Information on demand. You are very welcome to test the machine in our facility in Koblenz, Germany.